Nissan GTR Callipers on my e30 .... ??? :)

Need technical Q/A then you're in the right place

Moderator: martauto

turk
E30 Zone Squatter
E30 Zone Squatter
Posts: 1879
Joined: Sun May 20, 2007 11:00 pm
Location: Portsmouth

Post Sun Sep 25, 2011 10:36 am

I have an opportunity to purchase all 4 callipers off of a new Nissan GT-R :twisted:

Brembo monoblock six-piston calipers are used in front and rear are the four piston type. The racing-style three bolt structures are used. Im not sure if this means mounting points.

Brakes (Front) Carbon-ceramic ventilated discs (390 mm)
Brakes (Rear) Carbon-ceramic ventilated discs (380 mm)

Does anyone know anything about this set up and how agonisingly painful it would be to get them to fit and work on an e30?

For starters im guessing massive wheels, custom mounts, mahoosive master cylinder. Discs to fit the diameter or very similar, possibly having to use 5 stud.

Any ideas?

this link offers a swap for an older nissan: http://www.gtrblog.com/2008/06/05/r35-g ... skyline-g/


Image
S54, S62, S65 & S85 Plug & Play loom/Ecu Kits
Sump Baffles
Engine Conversion Kits/Parts
TrackDays
Image
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Sun Sep 25, 2011 11:08 am

There might be some helpful info here

http://www.e30zone.net/e30zonewiki/inde ... de_options
DHFiS
Old Skooler
Old Skooler
Posts: 2733
Joined: Sat Aug 12, 2006 11:00 pm
Location: cambridge

Post Sun Sep 25, 2011 11:42 am

Why do you want to do this?

Serious work to get discs that size fitted to an e30.
turk
E30 Zone Squatter
E30 Zone Squatter
Posts: 1879
Joined: Sun May 20, 2007 11:00 pm
Location: Portsmouth

Post Sun Sep 25, 2011 11:45 am

cheap calipers and awsome brake power... plus its a challenge :)
S54, S62, S65 & S85 Plug & Play loom/Ecu Kits
Sump Baffles
Engine Conversion Kits/Parts
TrackDays
Image
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Sun Sep 25, 2011 11:58 am

Challenge it maybe, but those disks dont look like they are Carbon ceramic, the pads maybe!

The E30 is too light a car, you wont be able to brake constantly with such large contact patches. Plus the Calliper weighs in at 5.6kg each (i dont want to know what the Iron disks weight in at) :eek: my AP's are 2.4 kg per side!

If you are after the bling factor, you cant go wrong, but if you're after true performance and the highest of technical ability then a custom AP kit (£2000+) is the only way to go.

Andrew
turk
E30 Zone Squatter
E30 Zone Squatter
Posts: 1879
Joined: Sun May 20, 2007 11:00 pm
Location: Portsmouth

Post Sun Sep 25, 2011 12:06 pm

Its not so much bling, its just a project to do. Im able to get the calipers at about 500 quid winkeye

I didnt realise they were that heavy :roll:

What size are your Ap discs?

Also have a friend who works at a cnc shop so brackets shouldn't be much hardship.

What discs might suit?
S54, S62, S65 & S85 Plug & Play loom/Ecu Kits
Sump Baffles
Engine Conversion Kits/Parts
TrackDays
Image
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Sun Sep 25, 2011 12:20 pm

Im running AP 5000+ disks which are 315mm by 28mm they weigh in at 4.6kg -costing about £255+VAT each, they come in Left and Right. My car is considerably lighter @1125kg with me and 20l of fuel. This is the same size favoured by some heavier E36 M3 GTR racers.

Without looking into what pad the R35 uses at the front, its impossible to say what disk would work.

You would also need to upgrade your wheels and this alone would add considerable weight, all the weight would be a severe penalty in any circumstance.

Also the R35 has leading edge callipers, you would have to flip them and switch axles, without seeing the internal structure it may mean that the leading piston in the calliper is on the wrong way round and also (minor detail) but the brembo/nissan logo would be upside down. Ive seen it a million times at car shows where people have nailed on a multi piston kit and given no thought on the micro details of how they operate, the best examples are of those with logos on both sides pointing the same way up! :rolling:

Andrew
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Sun Sep 25, 2011 12:29 pm

This is them under a set of 16" Hartge Classics.

Image

Hartges and Alpinas are actually a very hard wheel to fit brakes under. Just about clears everything!

Andrew
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Sun Sep 25, 2011 1:29 pm

Demlotcrew wrote:This is them under a set of 16" Hartge Classics.

Image

Hartges and Alpinas are actually a very hard wheel to fit brakes under. Just about clears everything!

Andrew
DIRTY WHEELS!! :D
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Sun Sep 25, 2011 1:31 pm

I miss them so much :cry:

Im a real idiot for getting rod of them! :o:
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sun Sep 25, 2011 4:29 pm

Hartges are good for big brakes! :D

Adem for £500 you can have a WMS kit with alloy 4 pots, not expensive to go up in size either 8)
turk
E30 Zone Squatter
E30 Zone Squatter
Posts: 1879
Joined: Sun May 20, 2007 11:00 pm
Location: Portsmouth

Post Sun Sep 25, 2011 4:35 pm

I can hall all 4 calipers for 500 tho. Maybe I could use the rear 4 pots on my front and sell the fronts...

But I know what you're saying about wms kit
S54, S62, S65 & S85 Plug & Play loom/Ecu Kits
Sump Baffles
Engine Conversion Kits/Parts
TrackDays
Image
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Sun Sep 25, 2011 4:40 pm

DanThe wrote:Hartges are good for big brakes! :D

Adem for £500 you can have a WMS kit with alloy 4 pots, not expensive to go up in size either 8)
Nah dude, compared with some other wheels out there, Hartges and Alpinas are a real pain in the ass!

And as for the WMS kits, they dont last very long under severe conditions, Theo had fade on our last track day, how ever i did manage to get some pad transfer, but i was out for very long sessions.

Andrew
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sun Sep 25, 2011 4:42 pm

turk wrote:I can hall all 4 calipers for 500 tho. Maybe I could use the rear 4 pots on my front and sell the fronts...

But I know what you're saying about wms kit
Wheels that suit an E30 then :)

Just punt the rice on turk 8)
keri-WMS
E30 Zone Camper
E30 Zone Camper
Posts: 1269
Joined: Sat Apr 29, 2006 11:00 pm

Post Mon Sep 26, 2011 11:38 am

Turk, for what it's worth, 390mm discs normally need 19"/20" wheels which won't be very good for the handling to put it mildly!

Demlotcrew wrote:
DanThe wrote:Hartges are good for big brakes! :D

Adem for £500 you can have a WMS kit with alloy 4 pots, not expensive to go up in size either 8)
Nah dude, compared with some other wheels out there, Hartges and Alpinas are a real pain in the ass!

And as for the WMS kits, they dont last very long under severe conditions, Theo had fade on our last track day, how ever i did manage to get some pad transfer, but i was out for very long sessions.

Andrew
The WMS T20 caliper is 1.75kg/side.

I'd be interested to put some numbers against that if possible so we're being fair? I'd like to know:

Disc size (Theo is running 280x22 WMS in the 15" BBS, the 298.5mm WMS kit fits your Hartge's as well and would be what you should compare the AP's to really)

Power

Tyre type

Pad type

Lap times

Brake fade is mainly a function of pad choice, Theo's car is really a full-race job now but he's not running extreme full-race pads from memory.
Last edited by keri-WMS on Mon Sep 26, 2011 11:47 am, edited 1 time in total.
WMS E30 brake kits! (4-pot 280mm & 300mm front / 2-pot 290mm rear)

www.wms-brakes.co.uk / http://www.e30zone.net/modules.php?name ... c&t=209737
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Mon Sep 26, 2011 11:45 am

Keri, ill try my best.

My Numbers;

Disk size: 315 x 28mm
BHP: 235hp
Tyre: Khumo V700 Hard
Pad: RS29
Lap times i don't have numbers for, but my sessions were very long and very hard on the brakes (30min+) and to add to that, i was running Compomotive TH monos which are not the best for brake cooling!
Fluid: Gulf RF1000 (best fluid by miles!)

From what i recall, Theo was running Dunlop Slicks, maybe he could fill in the other numbers?

I dont want this to turn in to an issue, the WMS kit is £500 and my custom AP kit was over £2000, its not difficult to assume the more expensive kit is more capable?

Andrew
keri-WMS
E30 Zone Camper
E30 Zone Camper
Posts: 1269
Joined: Sat Apr 29, 2006 11:00 pm

Post Mon Sep 26, 2011 11:52 am

No issue at all, just interested to see how they compare as you guys were on the track at the same time. Thanks for the numbers! :D

Theo was always going to be tougher on his brakes with slicks, they are smaller as well (15"/280x22 vs 16" 315x28) - bigger brakes will always be cooler for a given energy input.

Is Theo about - not seen many posts from him for a while? :?
WMS E30 brake kits! (4-pot 280mm & 300mm front / 2-pot 290mm rear)

www.wms-brakes.co.uk / http://www.e30zone.net/modules.php?name ... c&t=209737
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Mon Sep 26, 2011 11:57 am

Keri, thats my point, under severe conditions the brakes on Theo's car started to fade where as mines went on (covered with a wheel thats pretty poor for cooling) I didn't say the WMS kit is a bad kit, just that when pushed it faded, tbh so what, Theo didnt complain he just said it out of conversation and to be fair to him, he did say it was the first time.

RE Tyres, I was on brand new tyres and Theo was on pre-run slicks, I can easily assume the V700's had more grip, used slicks go off after a few heat cycles quickly.

Andrew