Afternoon folks,
I've noticed over the past couple of days getting stuck in road-works traffic that my 325 cab doesn't crawl along in 1st very smoothly - in fact it jumps and lurches along like a kangaroo!
What's the likely cause?
How to stop kangarooing? (jumping when crawling in 1st)
Moderator: martauto
-
PeteE30Tourer
- E30 Zone Camper

- Posts: 1317
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: Dorset

Back behind an M20, but now I can hear it better.
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
prop - gearbox coupling generally
-
asmith88
- E30 Zone Addict

- Posts: 2684
- Joined: Sat Aug 23, 2008 11:00 pm
- Location: Co Down, N.I
i remember seeing someone with this problem cure it with an afm
1990 brilliant red 318 is
-
E30BeemerLad
- Married to the E30 Zone

- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
Does it tick over smoothly?
I had a similar problem years ago on my 325, it started hunting at idle and then on constant light throttle it would lurch and kangaroo a bit. Turned out to be the inlet manifold gasket causing an air leak.
I had a similar problem years ago on my 325, it started hunting at idle and then on constant light throttle it would lurch and kangaroo a bit. Turned out to be the inlet manifold gasket causing an air leak.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Air leaks and injectors in need of a rebuild.
Also check that the TPS is set correctly.
Also check that the TPS is set correctly.
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
weird, mine was cured with a new prop guibo but it was definitely more of a mechanical drivetrain lurch issue
-
PeteE30Tourer
- E30 Zone Camper

- Posts: 1317
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: Dorset
Thanks for the help guys.
Tick-over is fine and steady. I'll look into air-leaks and give the AFM a proper clean too. I was already considering changing the injectors, so I'll go for that too.
Thanks again.
Tick-over is fine and steady. I'll look into air-leaks and give the AFM a proper clean too. I was already considering changing the injectors, so I'll go for that too.
Thanks again.

Back behind an M20, but now I can hear it better.
-
Ajsingh
- E30 Zone Addict

- Posts: 2378
- Joined: Sun Mar 28, 2010 11:00 pm
- Location: West Laaaandaan init! / Milton Keynes
How would u go about cleaning the AFM?
Without damaging any parts of it
There is a video on youtube showimg how to remove the wiper arm under the black plastic cover and clean the mating surface. It gets clogged with dirt and gives incorrect readings. Most the dirt sits where the car spends most of its revs, i.e mostly driving between idle and 2k will make that part of the track dirty.. Give it a go n clean it...
Without damaging any parts of it
There is a video on youtube showimg how to remove the wiper arm under the black plastic cover and clean the mating surface. It gets clogged with dirt and gives incorrect readings. Most the dirt sits where the car spends most of its revs, i.e mostly driving between idle and 2k will make that part of the track dirty.. Give it a go n clean it...
E30 Crazy!
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Do NOT remove the cover of the AFM unless you've proven it faulty by testing it!
If ever "if it ain't broke, don't fix it" applied to anything, it applies to this.
If ever "if it ain't broke, don't fix it" applied to anything, it applies to this.
-
Ajsingh
- E30 Zone Addict

- Posts: 2378
- Joined: Sun Mar 28, 2010 11:00 pm
- Location: West Laaaandaan init! / Milton Keynes
Brian. What does that video refer to then? Should that NOT be done? I thought it would have helped
E30 Crazy!
-
PeteE30Tourer
- E30 Zone Camper

- Posts: 1317
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: Dorset
I have done this in the past (take cover off AFM and clean wiper), but I cant recall it making a difference. The black plastic cover is glued down and sealed as I remember, so you'd have to ensure you re-seal it to stop moisture and dirt getting in and making it worse than when you started. It's a delicate job all round and as Brian said, not worth it unless you really know that's causing a problem. You could easily make things worse if you're not careful.
I dont know if it does any good or not, but I've cleaned my AFM in the past just by squirting loads of carb' cleaner through it and watch all the black deposits disappear.
I dont know if it does any good or not, but I've cleaned my AFM in the past just by squirting loads of carb' cleaner through it and watch all the black deposits disappear.

Back behind an M20, but now I can hear it better.
