Fitting skirts, without drilling
Moderator: martauto
-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
Anyone fit their tec2/SE/iX skirts without using the holes and gromits in the sills? I rather not go drilling holes in the sills if I can get away with bonding them on?
-
leeparkes
- Married to the E30 Zone

- Posts: 9535
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Tigerseal.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
No.
You'll need to drill for the tech2 ones for them to hold as there is a rubber gasket that sits between the sill and the kit.
You'll need to drill for the tech2 ones for them to hold as there is a rubber gasket that sits between the sill and the kit.

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
I'm using iX skirts Rav, which I thought fitted on the same as tec2 or SE skirts (but this gasket thing is new to me).
The rubber gasket is to stop moisture getting in behind them?
The rubber gasket is to stop moisture getting in behind them?
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Not sure on the iX or the SE ones Brendan, as i have never fitted or seen those up close.
I know that the tech ones have a rubber gasket though 100%
I know that the tech ones have a rubber gasket though 100%

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
Don't see anything listed for the iX skirts as with the tec2 ones.
Also going to need to keep the arch flaresstuck to the body and I'm not drilling holes in anyarches! Tiger seal hold them on long enough? Will you still be able to get them of without much bother, never bonded anything with tiger seal (yet)!
Also going to need to keep the arch flaresstuck to the body and I'm not drilling holes in anyarches! Tiger seal hold them on long enough? Will you still be able to get them of without much bother, never bonded anything with tiger seal (yet)!
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
No Tigerseal is a onetime solution and won't let go easily 

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
Curr946
- E30 Zone Regular

- Posts: 425
- Joined: Tue Dec 23, 2008 11:00 pm
- Location: Inverkeithing Fife
cut the tabs of the clips that go into the sills. then tigerseal the clips to the sills
If your wife must learn to drive, don't stand in her way!
-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
I might have to look into double side tape (listed anyway for the ix bits on realoem) or something else just incase I get sick of the ix bits.Rav335uk wrote:No Tigerseal is a onetime solution and won't let go easily
Curr946: tigerseal on the flange of the clips, rather than tigerseal the skirts them selves?
-
adit
- Married to the E30 Zone

- Posts: 13727
- Joined: Wed Jun 20, 2007 11:00 pm
- Location: portsmouth
there are a few similar threads on this subject Jozi:
http://www.e30zone.net/modules.php?name ... ight=tiger
http://www.e30zone.net/modules.php?name ... ight=tiger

E30 Parts Galore!! 07901 888019
[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
Thanks Adit, I'll have a look through the thread and the links in it before fitting. Anymention of using double sided tape in it?
-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
Adhesive tape might be the right job from the quick 2 mins searching 
-
Curr946
- E30 Zone Regular

- Posts: 425
- Joined: Tue Dec 23, 2008 11:00 pm
- Location: Inverkeithing Fife
yes there's 2 bits on the rear that would go into the holes on the sill cut these off then put tiger seal on the flange of the clip stick this to the sill and your side skirts will then clip on as normalJozi wrote:Rav335uk wrote:No Tigerseal is a onetime solution and won't let go easily
Curr946: tigerseal on the flange of the clips, rather than tigerseal the skirts them selves?
If your wife must learn to drive, don't stand in her way!
-
BEMER_LAND
- E30 Zone Newbie

- Posts: 137
- Joined: Wed Dec 02, 2009 11:00 pm
Im going using doubled sided gel type tape, prob wont last at all but its worth a shot if not il be cutting the clips and tiger sealing them

-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
If tigersealing the clips on means they stay put then it's worth a shot. Any link to the type of tape your talking about Denis?BEMER_LAND wrote:Im going using doubled sided gel type tape, prob wont last at all but its worth a shot if not il be cutting the clips and tiger sealing them
-
BEMER_LAND
- E30 Zone Newbie

- Posts: 137
- Joined: Wed Dec 02, 2009 11:00 pm
http://cgi.ebay.ie/ws/eBayISAPI.dll?Vie ... _500wt_716
Il let you know how it goes, only testing it out really
Il let you know how it goes, only testing it out really

-
baur320
- E30 Zone Squatter

- Posts: 1507
- Joined: Wed Jan 12, 2005 11:00 pm
- Location: Tyneside
How did the double sided tape work then?
Current E30 325i, E63 630is.
Previous E21 320/4, E9 3.0 CSA, E12 525, E30 320i, E28 528i, E34 535is, E30 318i, E28 525e, E30 325i Touring, E30 Baur 327i, E36 M3 Evo, X3is, E39 530d M Sport.
Previous E21 320/4, E9 3.0 CSA, E12 525, E30 320i, E28 528i, E34 535is, E30 318i, E28 525e, E30 325i Touring, E30 Baur 327i, E36 M3 Evo, X3is, E39 530d M Sport.

