From what i understand we already have means to run an electric fan through the standard fuse box. But how? is there a guide anywhere, do we already have the loom somewhere in the shell?
I already have an E34 535i aircon fan, (twin speed) and the switch mounted in the top right hand side of the rad (3 pin) came off the same e34 iirc.
Thanks (in advance)
Wiring an electric fan through the fuse box
Moderator: martauto
-
leeparkes
- Married to the E30 Zone

- Posts: 9535
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
Green
- E30 Zone Squatter

- Posts: 1698
- Joined: Wed Mar 17, 2010 11:00 pm
- Location: Santa Pod
Kevo wrote up a diagram for wiring it up in the m50/m52 section
http://www.e30zone.net/modules.php?name ... c&t=203860
The loom consisted on 3 wires on my e36 one being an earth and the other two running up to the fusebox up the passenger side.
Dan supplied me with a really good guide to wire it up into the fuse box with an image attached that really helped.
I'd assume it's virtually the same as the e36 aircon fan?
http://www.e30zone.net/modules.php?name ... c&t=203860
The loom consisted on 3 wires on my e36 one being an earth and the other two running up to the fusebox up the passenger side.
Dan supplied me with a really good guide to wire it up into the fuse box with an image attached that really helped.
I'd assume it's virtually the same as the e36 aircon fan?

-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Main difference between a 30 and a 36 is that the common feed to the thermoswitch on an E30 is 12 volts ignition switched live, but is earth on an E36.
No loom fitted, but the relay and fuse holders, and the feeds to them are present in the fusebox
No loom fitted, but the relay and fuse holders, and the feeds to them are present in the fusebox
