might be a silly question. If i remove my cat (on a 1.6), will i have any running issues. my mate who had an E36 said when he removed his cat he got lamda sensor errors, and it hunted all the time, wouldnt tick over etc.
im pretty sure on a J plate you dont need it for an MOT anyway.
de-catting
Moderator: martauto
-
TPS
- E30 Zone Team Member

- Posts: 13119
- Joined: Fri Mar 06, 2009 11:00 pm
- Location: Hampshire
It was from '92, I think for the MOT.

1991 325i Touring Alpine White II
1994 318i Touring Sterling Silver
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Depends if you have a CO adjustment pot. on the side of the air meter. I think very late ones don't have them.
If you have one, you need to connect a plug and socket together under the middle of the wiring cover on the bulkhead, which connects the pot. to the ECU in place of the lambda sensor signal.
1/8/92 is the date (manufacture or first use) for the change in emissions requirements.
If you have one, you need to connect a plug and socket together under the middle of the wiring cover on the bulkhead, which connects the pot. to the ECU in place of the lambda sensor signal.
1/8/92 is the date (manufacture or first use) for the change in emissions requirements.
-
Ninja_Penguin
- E30 Zone Newbie

- Posts: 232
- Joined: Sat Aug 27, 2011 11:00 pm
- Location: Cornwall
17/1/92...so im ok on the MOT front
ill have a look tomorrow.

-
TPS
- E30 Zone Team Member

- Posts: 13119
- Joined: Fri Mar 06, 2009 11:00 pm
- Location: Hampshire
I've just taken delivery of a 318i Touring, first registrated on 4/2/94, an L reg., that doesn't have a C02 adjustment screw.

1991 325i Touring Alpine White II
1994 318i Touring Sterling Silver
-
Ninja_Penguin
- E30 Zone Newbie

- Posts: 232
- Joined: Sat Aug 27, 2011 11:00 pm
- Location: Cornwall
not looked yet....its pissing down :p and i dont wanna get wet

