Early M20 management upgrade??

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
jimf
E30 Zone Regular
E30 Zone Regular
Posts: 627
Joined: Mon Mar 10, 2008 11:00 pm

Post Sun Sep 18, 2011 12:06 pm

I've just got my 1987 325i and have learned that fitting the later management system maybe a good idea. Is this a difficult job or is it all plug and play?
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sun Sep 18, 2011 1:54 pm

It's not quite straight forward...easier if you have a donor engine to compare and strip.

You need the engine loom and all of the bits attached(as some connectors are different)along with the toothed wheel attached to the front pulley and the bracket close by that the crank sensor attaches to.The way that the rev counter receives it's signal is different as well,but this is well documented now.
Youth is wasted on the young.
Ant
Retired Team Member
Retired Team Member
Posts: 10496
Joined: Tue Dec 21, 2004 11:00 pm
Location: PD+E dept :D

Post Tue Sep 20, 2011 4:30 pm

nothing wrong with keeping the M1.1 as long as it works imho
Product Development and Endurance for Delphi.

Original performance chips, original works not unlicensed copies :D Email FTW