ok, tried the search option, now need some advice :)

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
groovylee
E30 Zone Regular
E30 Zone Regular
Posts: 356
Joined: Sat Aug 13, 2011 11:00 pm
Location: Shefford, Beds

Post Fri Sep 16, 2011 2:45 pm

hi all, apologies for starting yet another speedo not working thread, but i have read all of the threads i can find, and i am at a bit of a loss now. so, here goes:
speedo and odometer not working, econometer doing it's thing of swinging from max to min as the speedo isn't working.
checked cable from plug under back seat right back to plug at the diff end. all fine on the continuity front. all fuses are as they should be, and after disassembling the speedo cluster, i can see no obvious dry joints or leaking SI board batteries, so all looks good there.
so, what next? the last resort for me is to buy another set of clocks and try swapping them, as the wife would kill me if i spend any more today :(

as i see it, it can now only be the clocks, or the sensor in the diff. am i right? or have i missed anything?

thanks in advance everyone :D

Lee
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Sep 16, 2011 6:25 pm

Sensor in the diff. is a reed switch that switches on and off several times per turn of the rear wheels. Connect your continuity meter across the appropriate wires at the cluster plug and roll the car a foot or two.
Continuity meter should beep/silent/beep/silent/etc.
User avatar
groovylee
E30 Zone Regular
E30 Zone Regular
Posts: 356
Joined: Sat Aug 13, 2011 11:00 pm
Location: Shefford, Beds

Post Fri Sep 16, 2011 7:26 pm

coolio, thanks Brian, i'll try that this weekend and report back. :cool:
User avatar
groovylee
E30 Zone Regular
E30 Zone Regular
Posts: 356
Joined: Sat Aug 13, 2011 11:00 pm
Location: Shefford, Beds

Post Sun Sep 18, 2011 3:40 pm

ok, tried that brian, but there was nothing doing. removed the sensor, and cleaned it up, tried refitting it and testing again, but still no dice. i take it that the sensor is duff? does it need 12V to work? as i was trying this at the sensor connections themselves with the wiring disconnected??

any help will be gratefully recieved. if no joy, i will go ahead and try to source a new one :)
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Sep 18, 2011 4:11 pm

Doesn't need power. It's a simple magnetically operated switch.
Have you tried with the continuity meter connected directly to the sensor?
User avatar
groovylee
E30 Zone Regular
E30 Zone Regular
Posts: 356
Joined: Sat Aug 13, 2011 11:00 pm
Location: Shefford, Beds

Post Sun Sep 18, 2011 4:20 pm

yep, tried that, also tried to run cable connected directly to sensor, round the outside of the car, and into the plug under the seat cushion. still no joy. i rotated the wheels with the sensor out, just to make sure the fins were still there inside the diff :) and they are. so my next thought is that the sensor has given up the ghost. so, next question, does anyone know the part number, or am i better off just PMing Adit etc for a secondhand one first?
sorry for all the questions Brian, just REALLY want to get this working :lol:
User avatar
threelander
E30 Zone Camper
E30 Zone Camper
Posts: 1166
Joined: Fri Jan 14, 2011 11:00 pm

Post Sun Sep 18, 2011 4:24 pm

did you check the fuses lee
User avatar
threelander
E30 Zone Camper
E30 Zone Camper
Posts: 1166
Joined: Fri Jan 14, 2011 11:00 pm

Post Sun Sep 18, 2011 4:28 pm

mine once did the same and it was a fuse lee
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Sep 18, 2011 5:30 pm

If Lee's testing the sensor correctly, then it's nothing to do with any fuse.
In any case, a blown fuse isn't a fault. It's a symptom of a fault!
Nothing wrong with a second hand sensor, as long as the connector is clean and shiny.
User avatar
groovylee
E30 Zone Regular
E30 Zone Regular
Posts: 356
Joined: Sat Aug 13, 2011 11:00 pm
Location: Shefford, Beds

Post Sun Sep 18, 2011 5:36 pm

cool, will see what i can get hold of then, and keep you all updated. thanks for all of the replies gents :)

Lee