Rear electric window conversion

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
rover-2000
E30 Zone Newbie
E30 Zone Newbie
Posts: 226
Joined: Thu Aug 25, 2011 11:00 pm
Location: Walsall

Post Mon Sep 12, 2011 5:47 pm

Guys
Thinking of converting the manual rear windows on the Touring to electric, using secondhand parts. I'm assuming that swapping regulators should be straightforward, but do the door looms plug into the existing harness or would I need to fabricate connections?
Just want to know if its a straightforward job or whether it isn't worth the effort..... 8)

Thanks.
Kind regards
John

1989 320i Touring
1993 E34 525i SE Touring
1979 Porsche 924 Lux
1982 Porsche 924 Lux
1985 Porsche 944 Lux
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Mon Sep 12, 2011 6:11 pm

You may be fortunate enough to find a complete door harness,just swap the regulator and plug the motor in!

Or you may have to swap in a door harness.You should find the extra sockets for the centre console switches already present.

The above presumes that your car left the factory with power front windows.My touring left the factory with 'keep fit' spec windows all round,so not even the switch harness is present!

Do not forget that you will need power window type rear door cards,as the hole for the switch is in a totally different place to the winder.
Youth is wasted on the young.
User avatar
rover-2000
E30 Zone Newbie
E30 Zone Newbie
Posts: 226
Joined: Thu Aug 25, 2011 11:00 pm
Location: Walsall

Post Mon Sep 12, 2011 6:17 pm

Thanks. I was thinking of getting the whole lot with the door harnesses. If I do, where do they plug into the main loom? The car already has front electrics so no problem there. I can worry about the cards later.... :wink:
Kind regards
John

1989 320i Touring
1993 E34 525i SE Touring
1979 Porsche 924 Lux
1982 Porsche 924 Lux
1985 Porsche 944 Lux
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Mon Sep 12, 2011 6:30 pm

The rear doors will have a harness going in for the c/l...have a look,you may have a complete harness.But the harness plugs into the door pillar in the same way as the front door one's do.

Cannot remember the wire colours,but they will be similar to the front motor wires,and will be the same as some on the switch socket.
Youth is wasted on the young.
bigwinn
E30 Zone Squatter
E30 Zone Squatter
Posts: 1832
Joined: Wed May 05, 2010 11:00 pm
Location: Lincolnshire/Leicestershire border

Post Mon Sep 12, 2011 6:43 pm

Rover, I did this a while back, from memory its pretty easy as Malc says... I didn't have the complete loom in the rear doors so I had to purchase them, it was a like for like swap over as there is a loom already there for the central locking.

The motors and regulators are 6 bolts securing to door frame, 2 to the window itself. Then all you need are the 4 window switches, the small override switch for the console, holes cut in the console and door cards are already there from the rear, and the small blanking grommets to cover the holes the original winders leave

Pm me if you get stuck
Bronzit gone- she lives on
'89 325i auto touring: Malachite Green

Now, I'm no gynecologist, but I know a tw4t when I see one...
User avatar
rover-2000
E30 Zone Newbie
E30 Zone Newbie
Posts: 226
Joined: Thu Aug 25, 2011 11:00 pm
Location: Walsall

Post Mon Sep 12, 2011 7:01 pm

Thanks. I will let you know if I go ahead. 8)
Kind regards
John

1989 320i Touring
1993 E34 525i SE Touring
1979 Porsche 924 Lux
1982 Porsche 924 Lux
1985 Porsche 944 Lux
User avatar
threelander
E30 Zone Camper
E30 Zone Camper
Posts: 1166
Joined: Fri Jan 14, 2011 11:00 pm

Post Mon Sep 12, 2011 7:18 pm

all electrics asv daimlerman says should be in the doors only the switches on the console need wiring
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Sep 12, 2011 7:26 pm

About 50/50 chance of the door looms being already fitted, but the wiring will be all be there at least up to plugs inside the B pillars.
TouringMatt
E30 Zone Camper
E30 Zone Camper
Posts: 1188
Joined: Mon Jan 10, 2005 11:00 pm
Location: Not where i should be

Post Mon Sep 12, 2011 8:35 pm

Got lucky with my 88 Tourer, wiring was there. Good upgrade.