The forever runnign rich m42 :(
Moderator: martauto
-
jon-m42
- E30 Zone Regular

- Posts: 570
- Joined: Sat May 23, 2009 11:00 pm
Guys i have started a thread a while back on the E30 BMW Chat section and i have had little help but yet not totally resolved my problem.
I don’t mean to be annoying by starting up a thred on this section, its just that the section were it was originally started seems as if though every1 has run out of ideas so i thought i start fresh in this Tech section hoping for a little more luck this time round.
Problem: running Rich M42 engine when cold or warm. You fire the engine and a strong smell of unburnt fuel coming out from the exhaust. Engine area smells like normal cold metal lol meaning no fuel smell.
My original post: http://www.e30zone.net/modules.php?name ... c&t=157727
Please do check it out.
Things done to resolve this:
Changed all Pipes connecting to and from the throttle body
Changed blue temp sensor
Checked fuel regulator all fine
Tried and tested different ICV AND AFM no change at all.
I am totally lost as it has been a while since i have questioned it. It has been sitting on the drive for a while now and i am just wanting to get it sorted i have never had this problem before and by far this is the first most annoying problem i have ever come across with the car other then this she has been fine and at one point useto give me good miles for the gallon.
I hope some of you help and advice will aid me through this annoying problem. All help and advice is much appreciated.
Regards
Jonm42
I don’t mean to be annoying by starting up a thred on this section, its just that the section were it was originally started seems as if though every1 has run out of ideas so i thought i start fresh in this Tech section hoping for a little more luck this time round.
Problem: running Rich M42 engine when cold or warm. You fire the engine and a strong smell of unburnt fuel coming out from the exhaust. Engine area smells like normal cold metal lol meaning no fuel smell.
My original post: http://www.e30zone.net/modules.php?name ... c&t=157727
Please do check it out.
Things done to resolve this:
Changed all Pipes connecting to and from the throttle body
Changed blue temp sensor
Checked fuel regulator all fine
Tried and tested different ICV AND AFM no change at all.
I am totally lost as it has been a while since i have questioned it. It has been sitting on the drive for a while now and i am just wanting to get it sorted i have never had this problem before and by far this is the first most annoying problem i have ever come across with the car other then this she has been fine and at one point useto give me good miles for the gallon.
I hope some of you help and advice will aid me through this annoying problem. All help and advice is much appreciated.
Regards
Jonm42
-
kilrone
- E30 Zone Newbie

- Posts: 77
- Joined: Thu Dec 31, 2009 11:00 pm
- Location: South Africa Cape Town
what is your fuel presure
-
jon-m42
- E30 Zone Regular

- Posts: 570
- Joined: Sat May 23, 2009 11:00 pm
errrrmm i dont knwo lol how do i test to get the reeding of the fuel pressure ?
sorry if this is a silly question i am a tad mechanically minded but clearly not as much as you guys.
sorry if this is a silly question i am a tad mechanically minded but clearly not as much as you guys.
-
jon-m42
- E30 Zone Regular

- Posts: 570
- Joined: Sat May 23, 2009 11:00 pm
if this helps this is what the garage i took the car to last come up with this


-
jon-m42
- E30 Zone Regular

- Posts: 570
- Joined: Sat May 23, 2009 11:00 pm
it’s always a while before i get a chance to get on the forum for a little help,
Just another thought could this over fuelling be caused by of course the AFM screw moved from original position and the little nipple directly on top of the throttle body been adjusted air valve or something like that.
I only know this because this is what I saw the last mechanic playing around with the car after he had checked all the pipe work from all over being able to tell there are no water or air leaks at all just a very strong raw smell of fuel coming from the zorst.
Thanks
Jon - m42
Just another thought could this over fuelling be caused by of course the AFM screw moved from original position and the little nipple directly on top of the throttle body been adjusted air valve or something like that.
I only know this because this is what I saw the last mechanic playing around with the car after he had checked all the pipe work from all over being able to tell there are no water or air leaks at all just a very strong raw smell of fuel coming from the zorst.
Thanks
Jon - m42
-
jon-m42
- E30 Zone Regular

- Posts: 570
- Joined: Sat May 23, 2009 11:00 pm
Rite guys an Update
As you may know or may not know I have a e30 318is totally standard and it is forever running rich. I have taken it to a fair few garages now in and around the area but still with no luck at all.
The problem is that it is drinking far too much fuel and the hunts up and down in traffic.
The performance and power throughout the whole rev range is still there in every gear and pulls very nicely however just in traffic of first thing in the morning waiting for it to warm up before i set off to work it totally reeks of un-burnt fuel everywhere on my drive way ”“ if you were to stand there for at least 2mins your eyes will be watering
Things I have done to try and sort this problem are:
Replaces all vacuum hoses in and around the throttle body + air box
Replaced AFM ”“ one which has not been altered as the blue cap is still covering the
adjustment screw
Replaced Throttle body
Replaced ICV
Replaced blue temp sensor
I have had all cylinders compression tested and they all showing good compression, + the fuel pressure has been tested and that’s coming out fine. and now finally i am thinking it could only be a head off job and to clean up the valves and vale seats...
Can anybody shed some light on this forever long problem .....
Is there any1 you recommend me taking my car to for a rebuild?
& before you 6 pot lovers say scrap it and put a 6pot in it however i am just trying to keep this car as honest as possible as i have another shell i am working with to get a 6pot in so don’t worry my fellow 6pot lovers i am working on that too.
Regards
Jon
As you may know or may not know I have a e30 318is totally standard and it is forever running rich. I have taken it to a fair few garages now in and around the area but still with no luck at all.
The problem is that it is drinking far too much fuel and the hunts up and down in traffic.
The performance and power throughout the whole rev range is still there in every gear and pulls very nicely however just in traffic of first thing in the morning waiting for it to warm up before i set off to work it totally reeks of un-burnt fuel everywhere on my drive way ”“ if you were to stand there for at least 2mins your eyes will be watering
Things I have done to try and sort this problem are:
Replaces all vacuum hoses in and around the throttle body + air box
Replaced AFM ”“ one which has not been altered as the blue cap is still covering the
adjustment screw
Replaced Throttle body
Replaced ICV
Replaced blue temp sensor
I have had all cylinders compression tested and they all showing good compression, + the fuel pressure has been tested and that’s coming out fine. and now finally i am thinking it could only be a head off job and to clean up the valves and vale seats...
Can anybody shed some light on this forever long problem .....
Is there any1 you recommend me taking my car to for a rebuild?
& before you 6 pot lovers say scrap it and put a 6pot in it however i am just trying to keep this car as honest as possible as i have another shell i am working with to get a 6pot in so don’t worry my fellow 6pot lovers i am working on that too.
Regards
Jon
-
senna
- E30 Zone Regular

- Posts: 612
- Joined: Thu Jun 21, 2007 11:00 pm
I would say change the AFM again.
Don't touch the screw on the side of it
I have an old one that was good but held the revs up high when coasting for a few seconds. You can have it free but its in Hull
Don't touch the screw on the side of it
I have an old one that was good but held the revs up high when coasting for a few seconds. You can have it free but its in Hull
-
Billwill
- E30 Zone Regular

- Posts: 363
- Joined: Sun Jun 26, 2011 11:00 pm
- Location: South Africa
Leaking fuel injectors 
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
I'm no expert but my Moore always suggests getting the injectors cleaned if they havn't been already as a possible cure for this problem.
-
jon-m42
- E30 Zone Regular

- Posts: 570
- Joined: Sat May 23, 2009 11:00 pm
rite guys thanks for the input
question is how do i check the injectors to see if they are working as they shuld be also is it worth getting them recon'd or is it worth getting a new set from the stealers?

question is how do i check the injectors to see if they are working as they shuld be also is it worth getting them recon'd or is it worth getting a new set from the stealers?
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
Injectortune on here do them for about £70, steelers will be very expensive.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
£40 (+ carriage). This is only 2/3 of an engine under discussion here.Rtaylor2208 wrote:Injectortune on here do them for about £70, steelers will be very expensive.
-
jon-m42
- E30 Zone Regular

- Posts: 570
- Joined: Sat May 23, 2009 11:00 pm
Rtaylor2208 wrote:
Injectortune on here do them for about £70, steelers will be very expensive.
£40 (+ carriage). This is only 2/3 of an engine under discussion here.
Cheers Brian
you have pm
regards
Jon
-
jon-m42
- E30 Zone Regular

- Posts: 570
- Joined: Sat May 23, 2009 11:00 pm
Any of you guys have the number to injector tune ?
cheers

cheers
-
DHFiS
- Old Skooler

- Posts: 2733
- Joined: Sat Aug 12, 2006 11:00 pm
- Location: cambridge
http://www.e30zone.net/modules.php?name ... highlight=jon-m42 wrote:Any of you guys have the number to injector tune ?
cheers
-
jon-m42
- E30 Zone Regular

- Posts: 570
- Joined: Sat May 23, 2009 11:00 pm
jon-m42 wrote:
Any of you guys have the number to injector tune ?
cheers
http://www.e30zone.net/modules.php?name ... highlight=
there is no number on the site and i have e mailed them lets see what happes
-
rix313
- E30 Zone Team Member

- Posts: 4970
- Joined: Fri Oct 31, 2008 11:00 pm
- Location: Silverstone
James is a busy chap but he will get back to you 
-
e301988325i
- E30 Zone Addict

- Posts: 3701
- Joined: Fri Feb 01, 2008 11:00 pm
- Location: Taunton, Somerset
The icv will adjust to suit what the mechanic has messed with, but may cause poor cold starting or high idle.jon-m42 wrote:it’s always a while before i get a chance to get on the forum for a little help,
Just another thought could this over fuelling be caused by of course the AFM screw moved from original position and the little nipple directly on top of the throttle body been adjusted air valve or something like that.
I only know this because this is what I saw the last mechanic playing around with the car after he had checked all the pipe work from all over being able to tell there are no water or air leaks at all just a very strong raw smell of fuel coming from the zorst.
Thanks
Jon - m42
Does your car have a lambda sensor fitted, I seem to think some M42's may have done?
Have you cheked the blue temp sensor resistance at the ECU plug to check your wiring?
Just because your AFM has the plug fitted doesn't mean it has not been adjusted.
Fit an AFM without the plug so you can adjust it, see how it runs, if the same as before; screw the adjustment screw in and count the turns, unscrew to where it was before and report back.
To lean up idle, you should unscrew it from where it is currently set, but you may have wiring or lambda issues so check these first.
I said:
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
-
Billwill
- E30 Zone Regular

- Posts: 363
- Joined: Sun Jun 26, 2011 11:00 pm
- Location: South Africa
Have you looked at this....more of a starting problem but depending on whether or not you have a lambda sensor you need to check this plug on the M42:
www.e30tech.com/forum/showthread.php?t=105848
www.e30tech.com/forum/showthread.php?t=105848
-
Andyboy
- Alpina Colada
- Posts: 12577
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: Notts
Also, make sure the throttle position switch is set correctly. They aren't adjustable like the old M20 ones, but you need to make sure that the throttle disc is fully closed when the pedal is released. To make sure, unwind the throttle stop screw fully, then wind it in again until it just contacts the throttle stop.
It's still quite common for clowns to wind in this screw to raise the idle speed - this then tells the throttle position switch to access the ECU's part load maps and chuck loads of fuel in.
It's still quite common for clowns to wind in this screw to raise the idle speed - this then tells the throttle position switch to access the ECU's part load maps and chuck loads of fuel in.
-
jon-m42
- E30 Zone Regular

- Posts: 570
- Joined: Sat May 23, 2009 11:00 pm
Much appreciate the support and advice guys however still no luck
The car pulls and drives like a dream
when its actually rolling from 20mph upwards, the car is really responsive in every gear and I honestly can’t fault it while its actually been driven however the problem comes to when it actually is in traffic or when waiting at the ever so long traffic lights, its where it starts to smell and people around start to wined their windows up embarrassing yes but it’s true the car absolutely reeks on standstill.
The car has no lamda sensor
The temp sensor was replaced with a new one from BMW ...how do I check the resistance?
The AFM with the blue plug fitted looks untouched and I only assumed it was an untouched unit however the old original afm was used to try get the ppm reading down while connected to the crypton computer machine but it was only down to 1200 which is still far to much where it should only be about 200.
After screwing the screw all the way in the car cuts out.
When you let go off the throttle the butterfly discs large and small in the throttle body are in a fully closed position.
What to do and who now ot tak my car to any E30 Gods out there because i am on the brink of givving up
regards
Jon
The car pulls and drives like a dream
The icv will adjust to suit what the mechanic has messed with, but may cause poor cold starting or high idle.
Does your car have a lambda sensor fitted, I seem to think some M42's may have done?
Have you cheked the blue temp sensor resistance at the ECU plug to check your wiring?
Just because your AFM has the plug fitted doesn't mean it has not been adjusted.
Fit an AFM without the plug so you can adjust it, see how it runs, if the same as before; screw the adjustment screw in and count the turns, unscrew to where it was before and report back.
To lean up idle, you should unscrew it from where it is currently set, but you may have wiring or lambda issues so check these first.
The car has no lamda sensor
The temp sensor was replaced with a new one from BMW ...how do I check the resistance?
The AFM with the blue plug fitted looks untouched and I only assumed it was an untouched unit however the old original afm was used to try get the ppm reading down while connected to the crypton computer machine but it was only down to 1200 which is still far to much where it should only be about 200.
After screwing the screw all the way in the car cuts out.
How do you set the throttle position switch?Also, make sure the throttle position switch is set correctly. They aren't adjustable like the old M20 ones, but you need to make sure that the throttle disc is fully closed when the pedal is released. To make sure, unwind the throttle stop screw fully, then wind it in again until it just contacts the throttle stop.
It's still quite common for clowns to wind in this screw to raise the idle speed - this then tells the throttle position switch to access the ECU's part load maps and chuck loads of fuel in.
When you let go off the throttle the butterfly discs large and small in the throttle body are in a fully closed position.
What to do and who now ot tak my car to any E30 Gods out there because i am on the brink of givving up
regards
Jon
-
jon-m42
- E30 Zone Regular

- Posts: 570
- Joined: Sat May 23, 2009 11:00 pm
has anybody used this garage for any work if so how are they any good or bad feedback?/
cheers
http://www.belgraviagarage.com/
cheers
http://www.belgraviagarage.com/
-
e301988325i
- E30 Zone Addict

- Posts: 3701
- Joined: Fri Feb 01, 2008 11:00 pm
- Location: Taunton, Somerset
No lambda means the car is using only the AFM (and TPS) to adjust fuelling, does your exhaust have a lambda boss to fit one to? Fitting a lambda sensor will probably cure your problems.jon-m42 wrote:The car has no lamda sensor
The temp sensor was replaced with a new one from BMW ...how do I check the resistance?
The AFM with the blue plug fitted looks untouched and I only assumed it was an untouched unit however the old original afm was used to try get the ppm reading down while connected to the crypton computer machine but it was only down to 1200 which is still far to much where it should only be about 200.
After screwing the screw all the way in the car cuts out.
regards
Jon
I meant adjust the AFM screw with the car turned off to check the position of the screw, how many turns?
If you want to save money and do this yourself, unscrew ( CCW from above) the AFM adjuster half a turn at a time and test for a day, get the car warmed up, a few starts etc after each adjustment. when the car becomes difficult to start cold wind the screw back in one turn and go back to the testing station.
How do you check the resistance? You need to buy a multi meter to check resistance, find a wiring diagram then unplug the ECU and measure the resistance at the ECU plug to check the wiring of the vehicle is not adding unwanted resistance.
I said:
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
