
Need help finding this intake boot
Moderator: martauto
-
boomerm20
- E30 Zone Regular

- Posts: 625
- Joined: Thu Sep 09, 2010 11:00 pm
- Location: Florida, USA
My car is a German-spec '89 325 sport.I'm currently experiencing a vacuum leak and would like to replace the intake boot,but I'm not having any luck locating this part.Any help will be appreciated.


-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
You can still get these at the BMW dealers in the UK, have you tried in the US
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
This is a late type intake boot without the branch for the servo. There was a thread on the different boots a couple of days ago.
-
boomerm20
- E30 Zone Regular

- Posts: 625
- Joined: Thu Sep 09, 2010 11:00 pm
- Location: Florida, USA
Thanks for the info guys.Realoem doesn't have this part listed for any e30s,but I was able to get the part number from intake boots for sale on ebay.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
I can assure you that the boot is in the ETK, listed under fuel preparation.
-
sibear
- E30 Zone Newbie

- Posts: 3
- Joined: Sun Jan 03, 2010 11:00 pm
Have you tried schmiedmann (schmiedmann.com)?
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
Item 8, part number 13711726325 used from jan '89.


-
boomerm20
- E30 Zone Regular

- Posts: 625
- Joined: Thu Sep 09, 2010 11:00 pm
- Location: Florida, USA
[quote="bss325i"]Item 8, part number 13711726325 used from jan '89.
This is the only boot I could find on realoem,but I found the correct one for my car on ebay.
This is the only boot I could find on realoem,but I found the correct one for my car on ebay.
-
boomerm20
- E30 Zone Regular

- Posts: 625
- Joined: Thu Sep 09, 2010 11:00 pm
- Location: Florida, USA
My car's intake boot only has one port,but that part is not listed on realoem.I found the correct one for my car on ebay,thanks.bss325i wrote:Item 8, part number 13711726325 used from jan '89.
http://cgi.ebay.com/ebaymotors/_W0QQcmd ... MEWAXQ3aIT
-
TPS
- E30 Zone Team Member

- Posts: 13119
- Joined: Fri Mar 06, 2009 11:00 pm
- Location: Hampshire
I might have this Boot in my Garage, I'll look later.

1991 325i Touring Alpine White II
1994 318i Touring Sterling Silver
-
boomerm20
- E30 Zone Regular

- Posts: 625
- Joined: Thu Sep 09, 2010 11:00 pm
- Location: Florida, USA
Thanks TPS ,but I need one ASAP because my car is running extremely rich.So I'm ordering one from the dealer and hopefully will have it by Wednesday.TPS wrote:I might have this Boot in my Garage, I'll look later.
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
Ignore the diagram, the part number listed is for a single outlet boot as fitted to 325i's from jan '89. My car is the same and i have replaced it using that part number.boomerm20 wrote:bss325i wrote:Item 8, part number 13711726325 used from jan '89.
My car's intake boot only has one port,but that part is not listed on realoem.I found the correct one for my car on ebay,thanks.
http://cgi.ebay.com/ebaymotors/_W0QQcmd ... MEWAXQ3aIT
By the way, if your boot is split it will cause the engine to run lean not rich as it will be sucking in unmetered air after the AFM.
Check the blue temp sensor first if your car is running rich.
-
boomerm20
- E30 Zone Regular

- Posts: 625
- Joined: Thu Sep 09, 2010 11:00 pm
- Location: Florida, USA
Excellent info,thanks for the clarification.I actually ordered the boot using that part number,and didn't notice the extra port until the boot got shipped.
