Removing ABS

Need technical Q/A then you're in the right place

Moderator: martauto

craigieeb
E30 Zone Addict
E30 Zone Addict
Posts: 4988
Joined: Mon Jan 10, 2005 11:00 pm
Location: In my man cave modifying... something

Post Sun Sep 11, 2011 3:41 pm

I'm taking the ABS off my tourer,

whats the best way to go about it?

Do I need to change the brake master cylinder?

:cool:
M50 Turbo!!! :o I shall say no more :D
craigieeb
E30 Zone Addict
E30 Zone Addict
Posts: 4988
Joined: Mon Jan 10, 2005 11:00 pm
Location: In my man cave modifying... something

Post Sun Sep 11, 2011 3:44 pm

Also, what brake fluid do people recommend?
Bearing in mind the car gets driven hard.
M50 Turbo!!! :o I shall say no more :D
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Sun Sep 11, 2011 5:49 pm

Yes the master cylinder is different as a non ABS one has three out lets, one for the rear and one for each side of the front and an ABS master has just two out lets, one for front and one for rear.

ATE super blue brake fluid is good for fast road/track use.

Available from ECP.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
User avatar
kevo
E30 Zone Camper
E30 Zone Camper
Posts: 1234
Joined: Thu Sep 21, 2006 11:00 pm
Location: S.Wales

Post Sun Sep 11, 2011 5:57 pm

i used the blank from a non abs m/c in my abs m/c when i removed my abs system to make the m52 airbox fit better. easy enough just whip it out and re shape the pipes to suit then remove the abs loom and ecu. any good make brake fluid will be up to the job, i only use motor factors dot 4.1 in my rally car.
Kev
craigieeb
E30 Zone Addict
E30 Zone Addict
Posts: 4988
Joined: Mon Jan 10, 2005 11:00 pm
Location: In my man cave modifying... something

Post Sun Sep 11, 2011 6:06 pm

The cylinder i'v got on now has...

2 outlets on the right hand side (looking at it as it's bolted to the servo)

and 1 what looks like a bolt/bung on the underside of it,

so can the bung/bolt be removed and let that outlet feed the rear brakes?

then just use the 2 on the side for the fronts...?
(does it matter which hole feed which side on the front?)

I'v heard of a few people using the super Blue, I'll give that a bash
:cool:
M50 Turbo!!! :o I shall say no more :D
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sun Sep 11, 2011 6:12 pm

All the masters ive seen have been the same, those fitted to ABS cars have a bung in the second front brake outlet, just remove the bung and run the line to the right front from here.

The outlet at the front of the master is for the rear brakes, the two at the rear are for the front
craigieeb
E30 Zone Addict
E30 Zone Addict
Posts: 4988
Joined: Mon Jan 10, 2005 11:00 pm
Location: In my man cave modifying... something

Post Sun Sep 11, 2011 6:15 pm

Awesome
cheers

:cool:
M50 Turbo!!! :o I shall say no more :D
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Sun Sep 11, 2011 7:23 pm

I removed the ABS from my E36. I retained the ABS master cylinder, and used a T piece to split the single front fluid line so it went to both front brakes. To pass an MOT, you will need to remove the ABS block and all the sensors as well as the dash bulb. Leave any part of the ABS system on and it'll fail - if the ABS is there in any part, it needs to work.