Clio servo on LHD e30?

Moderator: martauto

User avatar
Phil123
E30 Zone Newbie
E30 Zone Newbie
Posts: 1
Joined: Tue Aug 03, 2010 11:00 pm

Post Wed Sep 07, 2011 1:29 pm

Hello,

can someone tell me if the Clio Servo works also on LHD e30 by any chance? Is there a confirmed partnumber for the Clio servo with the adjustable push rod? I try to get a servo with the partnumber 8200 192 612 but not sure if the rod is adjustable :( .
Top
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Wed Sep 07, 2011 1:35 pm

The servo fits the same way, you need to fabricate something to adjust it up to the pedal. Beardymat did this, it will probably help you to read the whole thread - http://www.e30zone.net/modules.php?name ... c&start=25

Look here for adjusting the rod up to the master cylinder - http://www.e30zone.net/modules.php?name ... sc&start=0
Top
User avatar
JGTI
E30 Zone Newbie
E30 Zone Newbie
Posts: 106
Joined: Sun Jun 10, 2007 11:00 pm

Post Thu Sep 08, 2011 1:37 pm

i just unscrewed the bit that goes to the brake pedal and welded it to the clio servo, and had the spacer made to fit the pump.
Top

Return to “M50 / M52 Engines”