slightly noisy gearbox main shaft

Need technical Q/A then you're in the right place

Moderator: martauto

325cabman
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Fri May 16, 2008 11:00 pm

Post Tue Sep 06, 2011 5:04 pm

I've got an M20 325 manual with a slight gearbox rumble when warm. I'm told it may be the main shaft. The noise goes away when clutch is depressed but no noise at all when running from cold. My question is: can I put a thicker oil in the gearbox? and what would you reccomend? And what sort of price to replace bearings?
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Tue Sep 06, 2011 5:15 pm

IIRC the Getrag 325i boxes are quite well known for a bit of "chatter"

Just change the oil with good quality stuff - if its only a slight noise it will run like that for ages without any issues - I'd only be doing a rebuild if it gets worse or you start getting crunching issues.
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
325cabman
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Fri May 16, 2008 11:00 pm

Post Tue Sep 06, 2011 5:29 pm

Thanks Rob,
I changed the oil 12 months ago and only done about 1500mls since, it is only a very slight knock and only if the tickover gets a little lumpy. Maybe I need to sort the tickover!