Diff output shaft seal question

Need technical Q/A then you're in the right place

Moderator: martauto

DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Mon Sep 05, 2011 1:43 pm

Quick question about the dust cover plates, realoem is listing two covers, small and large, do I need both? I dont remember seeing two covers when I popped the drive flange out :?

2 and 3 in the link -

http://www.realoem.com/bmw/showparts.do ... g=33&fg=10
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Mon Sep 05, 2011 1:50 pm

Anybody? Before I go back to work
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Mon Sep 05, 2011 5:02 pm

E34c 530i V8?

There's something weird about these that I can't quite remember. It's basically a 540i rear axle with the big CV flanges on the trailing arms, but a 525i type diff with small output flanges.
I'd buy both, and back the ones you don't need.
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Mon Sep 05, 2011 6:44 pm

It is going in a 525i Andy, you just cleared up why the drive shafts are not interchangeable :D

Turned out the dust covers are only about £1 each so they got ordered anyway 8)