Advice on which diff??
Moderator: martauto
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
Guys I've done about 500 miles on my new build now and it feels a tad slow in the lower rev ranges mean like a 1.4 polo can pull away from me lol
Anyway the diff I've got is a 3.25 LSD I know it's low geared but was wondering what people think would be the best ratio?
Thanks in advance
Anyway the diff I've got is a 3.25 LSD I know it's low geared but was wondering what people think would be the best ratio?
Thanks in advance
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
With a 3.25 diff it might be worth considering an E36 gearbox, if it will fit whatever engine you have. This will give the equivalent of a 4.01 diff with an E30 box.
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
Sorry forgot to mention it's a m20 2.5 I don't mind changing diffs e36 gearbox won't fit an m20 will it Brian
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
It will if you leave the M52B28 still attached to it!
Your diff. will be a bit to much the other way with an E36 box. You need a diff. in the middle - 3.64 or 3.76
Your diff. will be a bit to much the other way with an E36 box. You need a diff. in the middle - 3.64 or 3.76
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
Lol ha nice one
Yeah I really don't know which would be best I think I'd rather have it a little quicker of the line that top end so maybe 3.76
Yeah I really don't know which would be best I think I'd rather have it a little quicker of the line that top end so maybe 3.76
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
The best for a 325 is a 3.64 apparently. It gives the right compromise between acceleration and economy. You could go one up to a 3.73 if you want better acceleration.
But a 3.25 is a diesel diff, isn't it?
But a 3.25 is a diesel diff, isn't it?
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
At a guess,your 3.25 is giving about 80mph at 3000rpm?
You will need about 250bhp to cope with that....
3.64 is 73mph at 3000rpm
4.1 is 65mph at 3000rpm.
You really need a medium case diff with a 2.5,one with 8 bolts holding the rear cover on.
You will need about 250bhp to cope with that....
3.64 is 73mph at 3000rpm
4.1 is 65mph at 3000rpm.
You really need a medium case diff with a 2.5,one with 8 bolts holding the rear cover on.
Youth is wasted on the young.
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
Erm I think it's doing about 70 80 at 3000rpm so your about right well it's going to be turboed and about 350 bhp so will the 3.25 ratio be ok then of should I still go about 3.64 or 3.76
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
The 3.25 is the e30m3 diff I believeGrrrmachine wrote:The best for a 325 is a 3.64 apparently. It gives the right compromise between acceleration and economy. You could go one up to a 3.73 if you want better acceleration.
But a 3.25 is a diesel diff, isn't it?
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Diffs are reasonably easy to swap,I would look around for a 3.64 or a 3.73 and buy what ever comes up first,but hang onto the 3.25 for when you fit the turbo.The other will re-sell easily for the same cash that you paid.ross2009 wrote:Erm I think it's doing about 70 80 at 3000rpm so your about right well it's going to be turboed and about 350 bhp so will the 3.25 ratio be ok then of should I still go about 3.64 or 3.76
Going from recent experience,if you are fitting a diff laid on your arse under a car on axle stands,check it's mounting bolts every six months!
Youth is wasted on the young.
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
ive done many mate dont worry about that lol
so you think that 3.25 will be good for when its turboed ?
just thinking as i will prob have about 3000 - 4000 rpm of lag so the bottom rev ranges still wont be affected
so you think that 3.25 will be good for when its turboed ?
just thinking as i will prob have about 3000 - 4000 rpm of lag so the bottom rev ranges still wont be affected
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Guess it will depend on how quickly the turbo spools up.....my only experience of turbo's is via HGV's,come on boost at 900rpm and all done by 1700rpm!
Youth is wasted on the young.
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
it will be between 3 and 4 k so hence why i really wanted some thing higher geared for the lower rev range
this car is only built for a toy its not a daily driver im not worry about fuel comsumption or motor way miles etc so i think i may go for like you mentioned a 3.64 or a 3.76
this car is only built for a toy its not a daily driver im not worry about fuel comsumption or motor way miles etc so i think i may go for like you mentioned a 3.64 or a 3.76
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
i was looking at that one dan but he wont post it and its abit far to go just to pick it up from me but would be perfect

