Hi guys, got an m40 316i e30.
Putting a full 325i braking setup (discs, calipers, master cylinder and trailing arm)
I am also looking to replace all the oem brake line with uprated braided brake line, however i see that there are 4 line and 6 line brake lines.
Which one would i need?
Cheers.
4 or 6 line brake line?
Moderator: martauto
-
ian332isport
- E30 Zone Team Member

- Posts: 5380
- Joined: Wed Dec 22, 2004 11:00 pm
- Location: West Sussex
If you have rear drums then you need a 4 line kit. If you have rear discs, you need the 6 line kit.
Seeing as you are fitting rear discs, you will need the 6 line kit.
Ian.
Seeing as you are fitting rear discs, you will need the 6 line kit.
Ian.
If it aint broke - Modify it...
-
redcar
- E30 Zone Squatter

- Posts: 1610
- Joined: Wed Jul 20, 2011 11:00 pm
- Location: Hertfordshire
that clears things up, yes, i'll be fitting rear discs.
So i shall order the six line kit.
Cheers
So i shall order the six line kit.
Cheers
-
capri_rob
- Married to the E30 Zone

- Posts: 9678
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
If you're buying Goodrigde braided hoses there are 2 further options - zinc plated fittings ( which will dull over time but are cheaper ) or Stainless fittings ( which are more expensive but won't go dull ).

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
nickphine
- E30 Zone Regular

- Posts: 282
- Joined: Sun Dec 03, 2006 11:00 pm
- Location: Kendal
I have a brand new zinc plated 6 line kit sitting on my shelf, £70 delivered to uk if you're interested. Cheers, nick hine.
-
redcar
- E30 Zone Squatter

- Posts: 1610
- Joined: Wed Jul 20, 2011 11:00 pm
- Location: Hertfordshire
thanks nick but just got one yesterday for 60. Sorry 
-
rix313
- E30 Zone Team Member

- Posts: 4970
- Joined: Fri Oct 31, 2008 11:00 pm
- Location: Silverstone
capri_rob wrote:If you're buying Goodrigde braided hoses there are 2 further options - zinc plated fittings ( which will rust over time but are cheaper ) or Stainless fittings ( which are more expensive but won't go rust).
