arghh help please. Heater matrix

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
leton123
E30 Zone Newbie
E30 Zone Newbie
Posts: 2
Joined: Sat Aug 27, 2011 11:00 pm

Post Sun Aug 28, 2011 6:53 pm

Hi, Just bought a 1990 325 convertible and have a leaking heater matrix.

I have tried to find old posts to show me how to take this out but no luck. Can anybody help me please. I have been most of the day trying to locate and remove. Do i need to remove most of dash???
Thanks in advance for any help.
turkeysneck
E30 Zone Regular
E30 Zone Regular
Posts: 441
Joined: Sat Nov 27, 2010 11:00 pm

Post Sun Aug 28, 2011 8:48 pm

Remove the glove box and centre console and you can slide it out without removing the dash. The hard part is removing the little bolts that hold the water pipes onto the heater matrix, there's not a lot of room. It's not a massive job though just fiddly.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Aug 28, 2011 10:18 pm

Far more likely to be a leaking electric heater valve on the LH side of the heater box than a leaking matrix, so check before you get too involved.
Also check that your coolant pressure cap has been replaced under the 1996 safety recall.
User avatar
leton123
E30 Zone Newbie
E30 Zone Newbie
Posts: 2
Joined: Sat Aug 27, 2011 11:00 pm

Post Wed Aug 31, 2011 12:29 pm

Thanks Both,
I will try to remove and change over weekend.
I have pulled glovebox and centre console out but still cant see how it slides out.

Brianmoooore thanks for info, will check to see if cap has been changed. The leak seems to be coming from inside the matrix not the valves on the side. I am no expert tho.
I will let you know.
Ta