318is wiring help

Need technical Q/A then you're in the right place

Moderator: martauto

sag
E30 Zone Regular
E30 Zone Regular
Posts: 319
Joined: Tue Jan 08, 2008 11:00 pm
Location: London

Post Sun Aug 28, 2011 9:11 pm

hi guys, i ve got a 318is on 'h' plate with m30b35 conversion

One of the previous owners had the car running as a track car and at some point the body loom has either been modded or removed.

As i was hoovering my car,i noticed some dampness on the passenger side front footwell.On further inspection i noticed the grommit,which sits on the bulk head and allows the wires to pass through into the fuse box,had been dislodged.

i removed the glove box and to my horror 8O the loom was in a state. Majority of the wires had been cut and rejoined and a lot of insultion tape had been used and some wires were exposed. There was a OBC check panel which was tucked away in the corner and a flame thrower module was there to(hope steve wasnt the one of the pevious owners) :mad: !!....
Prior to this on one my ever increasing!!things to do list was to remove the fuse box and mount it correctly because the fuse box was incorrectly postioned ,as the mounting bracket on the fuse box is facing the turret. now im surely gonna change the fuse box and body loom complete.

just few quick questions

1.Deos the 318is come with OBC?

2.Do 318is have a brake wear sensors?

3.Out of 1-10 whats the job like in changing the body loom?

4.Deos 318is orginally have a in car headlight adjustment?

thnks in advance sag
Duke137
Married to the E30 Zone
Married to the E30 Zone
Posts: 7207
Joined: Sat Aug 29, 2009 11:00 pm

Post Sun Aug 28, 2011 9:31 pm

It's a time consuming job involving carpet removal to do the wiring loom, everything has to be disconnected from the head lamps to the tail lamps! Some things have "sub looms" you can leave like the dash board, the doors and the scondary fuel/diff loom but the main body loom is a "one piece" thing that has to be fed out through the bulk head and out of the engine bay, and back in the same way.

I have a full completely un-cut body loom, which is rare and worth every penny of the £90 it is for sale for. PM me if interested, it is boxed and ready to go. :)
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
DHFiS
Old Skooler
Old Skooler
Posts: 2733
Joined: Sat Aug 12, 2006 11:00 pm
Location: cambridge

Post Sun Aug 28, 2011 9:37 pm

1.Deos the 318is come with OBC?

Not as standard.

2.Do 318is have a brake wear sensors?

Yes - on the front pads only.

3.Out of 1-10 whats the job like in changing the body loom?

See Duke137's answer

4.Deos 318is orginally have a in car headlight adjustment?

Yes - its a fluid filled system and rare to find one that still works.
Duke137
Married to the E30 Zone
Married to the E30 Zone
Posts: 7207
Joined: Sat Aug 29, 2009 11:00 pm

Post Sun Aug 28, 2011 9:39 pm

I forgot to say, engine loom is seperate 8)

When it's out you will have to untangle and re-install something like this:
Image

You can imagine it isn't a 5 min job :)
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Aug 28, 2011 10:15 pm

1/ Do you mean OBC (which replaces analogue clock) or the 'check' system (panel with red warning LEDs) up by the interior mirror? OBC was an option, and requires its own sub loom, which plugs interfaces with the rest of the car by a plug into the back of the instrument cluster.
'Check' system was a six cylinder car thing, and uses a different body loom. The loom can be used in a four pot car, and all functions can be made to work, except the oil level warning.

2/ Pad wear sensors on front left and rear right pads. Main body loom is the same whether an E30 has rear discs or drums, but on cars with drums there's a shorting link connected to the plug and socket on the right hand side of the rear seat pan.
sag
E30 Zone Regular
E30 Zone Regular
Posts: 319
Joined: Tue Jan 08, 2008 11:00 pm
Location: London

Post Sun Aug 28, 2011 11:11 pm

thnks guys :cool:

Brianmoooore wrote:1/ Do you mean OBC (which replaces analogue clock) or the 'check' system .
yep its the check system
duke137 wrote:I have a full completely un-cut body loom
pm on ur way