Rav's Chromie, Bodywork time

[Rav335uk]

Yes Lee, a ding in the outer lip, nothing really as i'll be ordering new lips all round for them.

[leeparkes]

Are you going wider, staggered etc?

[Rav335uk]

Yes mate, staggered set up

[Rav335uk]

Some of toadys action.

These Hella's are a fooking ballache t do.
They are properly sealed units from factory unlike the Hella main beams.
It takes double the heat and time to get these apart.
I have tried these before and ruined 3 main beams by forcing the lense to come off , but I finally got it.
Mick, if you're reading this, don't send those to me, I can't guarantee I won't crack a lense or 2.
Anyway, results are below.




Regards to wiring these into the chromie, are the adaptors still available, i remeber Rob having bought a set for his Cabbie, or should I just splice them into the loom.
I have worked out all 3 wires, so not a problem.

[Kedge]

Looking good Rav!

Let me know about the headlight wiring, i still need to wire my Hellas in.

[DanThe]

Whats going on with the mix-n-match headlights Rav?
Tell me your not going to fit projectors to this...

[Rav335uk]

Keeping th origional Lights Dan, but tbh, the light coming of these isn't very good at night.
These are early Bullseyes, so should look OK with HID's in them.
Mix and match will be OK for the time being, I will be getting Hella mains to.

Dave, the wiring doesn't look to difficult, there is 1 earth and 2 lives, one for the side lights and the other for high.

[Duke137]

Headlights look cool

[magpie]

i hear you Rav,bosch!

[Rav335uk]

Cheer Fergus.

Just making sure Mick

[Duke137]

How much do you charge to do that to a set of Bosch lamps? With cross hair things

[Rav335uk]

PM'd

[Rav335uk]

And this turned up today, NEW front chrome centre.

[Dezzy]

That's

[Rav335uk]

Just need to locate some corner joining caps, don't seem to be any around atm.

[capri_rob]

Just need to locate some corner joining caps, don't seem to be any around atm.

I might have one - will check.

[capri_rob]

Got what I think is a passenger side one :

[Rav335uk]

MMMMM,

Are you letting it go then Rob?

[capri_rob]

MMMMM,

Are you letting it go then Rob?

Yes mate

I'm guessing its 51111888269 - realoem guide price is $32.62

What you been quoted ?

[DanThe]

Is that a genuine ravster? The rear joiners are £20 a go,

[Jim320i]

How much was it Rav? When I look at mine, I think they look in very good condition, but brand new look awesome...


Or is it one I think it is when we spoke about it a while ago at a show...?

[DanThe]

Brand new genuine look poor when you put them next to properly re-chromed bumpers, eh Dez

[Rav335uk]

Rob, Thanks, but got a set o/f and n/s, brand new.

Dan, no not a BMW one, but a rep one , not bad either for what I paid.

Jim, none left, I bought all the 4 centres they had left

[Rav335uk]

Dan, found someone who does Chroming local, so i'm going to take the rear qtrs to then, the centre is too far gone.

[Dezzy]

Brand new genuine look poor when you put them next to properly re-chromed bumpers, eh Dez

Mine is sex mate. Just thinking I'll need the front doing before I them.

[Jim320i]

You git!

[Rav335uk]

You git!

Me?

[Jim320i]

Yus

[Rav335uk]

Yus

[Jim320i]

May I have one? You dont have 4 chromies... Did you find out about the rears?

[Rav335uk]

Nothing yet about the rears, but i've asked the question.

[Rav335uk]

May I have one? You dont have 4 chromies... Did you find out about the rears?

Yes Jim, I'll put one aside for you.

[Jim320i]

Your an angel. I don't need one, but always good to have a spare I suppose.

[Rav335uk]

Best be sure you want it then, as I have had 3 more pm's asking.

[Jim320i]

Sell it dude... I'm sure I can get my hands on one at a later date.