Post
Wed Aug 24, 2011 1:21 pm
As Rob says,getting in there is the hard bit!
I have changed rear brake pipes,in the UK we need to start forward of the three way,just using standard stuff...then I have found cars where it is impossible to get a spanner between the beam and the tank and onto the hose coupling....for these,I now have a set of 'crows foot' spanner/sockets!
Usually,the answer when stripping out,is the slice the flexi as near to it's ferrule as possible,then use a 14mm deep socket on an extension over the top of the beam,with an 11mm brake pipe spanner on the pipe fitting.
Going back is where the 'crows foot' earns it's purchase price....
Youth is wasted on the young.