spark plug change

Need technical Q/A then you're in the right place

Moderator: martauto

teatime39
E30 Zone Regular
E30 Zone Regular
Posts: 301
Joined: Sun Mar 23, 2008 11:00 pm
Location: north london

Post Sat Aug 20, 2011 11:05 am

I've read on the zone that someone used ngk zgr5a plugs , i was wondering if i can use them on my 1990 320i 6 pot . the book tells me to use champion n9ycc .also what oil is best for my car . any advice would be greatly appreciated.

Also i had an exhaust back box put in and it seems to be blowing in the middle joint any advice on that please.
hongkongfuey
Mad-tango-geezer
Posts: 3303
Joined: Fri Jun 08, 2007 11:00 pm
Location: portsmouth

Post Sat Aug 20, 2011 11:21 am

Dont know if they are the same but in the 325 i always use bpr6es , a good 10/40 semi synth, see if it needs tightening, or a bit of exhaust paste, or if you had it done at a shop take it bsck to them
if there wern't people like me,
with cars like mine,
who would you put down to make yourself feel better?
User avatar
torquey
E30 Zone Regular
E30 Zone Regular
Posts: 263
Joined: Wed Oct 13, 2010 11:00 pm
Location: s devon

Post Sat Aug 20, 2011 11:48 am

i run zgr5a plugs on my `89 320, good plugs.
leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9535
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Post Sat Aug 20, 2011 11:57 am

NGK bpr6es FTW 8)
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o: