another heating temp question !!!

Need technical Q/A then you're in the right place

Moderator: martauto

ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Fri Aug 19, 2011 10:24 pm

alright guys
took the old girl for a run tonight but on the way bk got stuck in traffic for about half an hour to 3/4s of an hour bearing in mind that its a new turbo engine that i built my self with a welded head thats done only about 70 miles so far,
mind you the engine didnt boil over but crept up very slowly it ended up over the 3/4 mark on the gauge i know there is no air in the system and the heating is nice and hot
i had the blower on 4 with it on hot to try and cool it down abit but didnt make no difference it kept creeping up am i right in thinking it maybe the welded head making it slightly hotter ?
or could it be the viscous not operating properly ?

any thoughts ??
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
User avatar
fowler
Boost Junkie
Posts: 3468
Joined: Mon Jan 10, 2005 11:00 pm
Location: New Addington/Croydon

Post Fri Aug 19, 2011 10:26 pm

Ross there will still be air in that system it is very hard to bleed when head is welded trust me take home let cool then open system and leave i bet it will swallow some coolant
if ned any advice text me
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Fri Aug 19, 2011 10:27 pm

ok mate ill have another go tomoz after work :)
normal driving its absolutly fine no trouble what so ever
first time its been in traffic too tho
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
User avatar
fowler
Boost Junkie
Posts: 3468
Joined: Mon Jan 10, 2005 11:00 pm
Location: New Addington/Croydon

Post Fri Aug 19, 2011 10:28 pm

if any problems arose it would ccok whilst idling check viscous also :D
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Fri Aug 19, 2011 10:29 pm

yeah ok ill stick a newpaper in it tomoz see if its biting :mad:
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30