vibration from the back end when putting foot down

Need technical Q/A then you're in the right place

Moderator: martauto

e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Thu Aug 18, 2011 9:41 pm

had the m52 in for the best part of 3 months now and fitted an LSD....... heard a ''ding ding ding'' noise the other night like metal leaving the car lol and thought nothing about it but today i went to shoe it out of a roundabout and had this almighty vibration from the rear end!!!

does not do it when taking it easy..... only when chucking torque through it (booting it)

got underneath her earlier and noticed a diff bolt missing! 8O. this explains the ding ding the other night as nut did the off! the right hand top bolt gone and the right hand front bolt loose??

thing is when i fitted the diff i bent a 19mm spanner like a banana tightening them up so dont understand how this has happened....

if it tighten them all up and use thread lock will this noise dissapear? as it looks like it has twisted slightly and the prop is hitting the metal above the knuckle when booting it!!

TIA
A 2 door e30 with 8 cylinders, what could be better winkeye :D
rrs
E30 Zone Regular
E30 Zone Regular
Posts: 421
Joined: Sat Jul 18, 2009 11:00 pm
Location: Kent

Post Thu Aug 18, 2011 9:52 pm

Did you adjust the prop length when you fitted the LSD?

Slim chance but you may have stretched the threads on the bolts (or they are just old) and have undone themselves through vibration. Might want to try new bolts and yes thread lock should help but i'd try new bolts too.
E30BeemerLad
Married to the E30 Zone
Married to the E30 Zone
Posts: 16806
Joined: Mon Mar 28, 2005 11:00 pm
Location: Norfolk

Post Thu Aug 18, 2011 9:59 pm

That's funny Ant, I have the same symptoms at the moment, it's almost like driving over very light rumble strips, but I get it under even medium acceleration. I shall investigate and report back also.
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Thu Aug 18, 2011 9:59 pm

yeah i adusted the prop, didnt need much tbh....

i think it may be where im chucking over 200 lb ft through it they have just worked loose! i just hope once ive done all the bolts up it pulls itself back in line and stops fouling...

the other option ofcourse is to smash feck outa the offending area with a knocking stick!! :twisted:
A 2 door e30 with 8 cylinders, what could be better winkeye :D
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Thu Aug 18, 2011 10:03 pm

thats exactly it lee!!! a very good description mate to be fair :)

i was getting it under half and full throttle but after getting underneath her earlier and tightening up the front right one that was loose its only when 3 quarters to full throttle...??!!!.....

boot down and she gives it ''brrrrrrrrrghhhh'' and i can feel it through the car like im going over a long arse bloody catle grid!!! :?
A 2 door e30 with 8 cylinders, what could be better winkeye :D
Cook318IS
E30 Zone Addict
E30 Zone Addict
Posts: 4586
Joined: Fri Jun 08, 2007 11:00 pm
Location: Torquay

Post Thu Aug 18, 2011 10:09 pm

I've had a similar vibration. Everything on the prop is new + aligned, bolts in correct directions. All bushes are new, top mouts are ok, new dampers and everything is tight. I've still got a bit of vibration, its on the to do list tommorow now that i've finished some work on my week off :D
Image
rrs
E30 Zone Regular
E30 Zone Regular
Posts: 421
Joined: Sat Jul 18, 2009 11:00 pm
Location: Kent

Post Thu Aug 18, 2011 10:15 pm

e30-dk wrote:yeah i adusted the prop, didnt need much tbh....

i think it may be where im chucking over 200 lb ft through it they have just worked loose! i just hope once ive done all the bolts up it pulls itself back in line and stops fouling...

the other option ofcourse is to smash feck outa the offending area with a knocking stick!! :twisted:
If they've worked loose one they will do it again I would definately suggest trying some thread lock
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Thu Aug 18, 2011 10:31 pm

yeah i think im going to invest in some thread lock tomoro before i get started mate...... didnt think before but it was my first dif swap lol

having said that though i used a long 19mm spanner with the ring on the bolt head and a jack bar over the other end for leverage.. bent a forger spanner like a banana!! :mad:
A 2 door e30 with 8 cylinders, what could be better winkeye :D
rrs
E30 Zone Regular
E30 Zone Regular
Posts: 421
Joined: Sat Jul 18, 2009 11:00 pm
Location: Kent

Post Thu Aug 18, 2011 10:41 pm

Over-tightening in itself can cause them to come loose if the threads have stretched the surface area on which they grip is reduced therefore they come loose!

Sorry if you already know this but its very common and not a lot of people realise what they are doing when they over-tighten I come across it quite a lot. :cry:
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Thu Aug 18, 2011 10:49 pm

yeah i am familier with that concept mate tbh,, im not a gorilla generaly when tightening things but i hav 2 spanners like bananas..... thye one which bent trying to get the original dif off and the one i used to put the new one on!

seeing how tight they were to get off and the fact this item handles all the power.... and a lot more of it now,, i banged them up tight :mad:
A 2 door e30 with 8 cylinders, what could be better winkeye :D
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Fri Aug 19, 2011 2:53 pm

update-

found the problem caused by shit loads of added power and lack of thread lock (slapped hand for me lol)

the front right dif bolt loose and the 2 rear ones gone! dif has dropped its arse end slightly and when ever i boot it the prop end moves up and hits the fuel tank..... took out the 2 front bolts and thread locked them back in but now had to order 2 new dif bolts from bmw for £1.06..... these will be thread locked in on monday

with the 2 rear ones in and tight this will make the dif sit square and thus the prop wont hit anything
so lee,, check this out mate :)
A 2 door e30 with 8 cylinders, what could be better winkeye :D