Magnetic key alarm

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
maestego
E30 Zone Newbie
E30 Zone Newbie
Posts: 242
Joined: Tue Aug 09, 2011 11:00 pm

Post Wed Aug 17, 2011 10:40 pm

hi all,im abit peeeved right now with the 325 convertible as its the Magnetic key alarm key will not shut off the alarm now and it will no start aswell.....is there any way the i can remove the dam thing and where to look as this is my first ever e30 with this sort of alarm......can any one help me with this problem???

rgds andy
User avatar
fixedwheelnut
E30 Zone Regular
E30 Zone Regular
Posts: 909
Joined: Sun Nov 20, 2005 11:00 pm
Location: South East London

Post Thu Aug 18, 2011 12:02 am

Have you done the Central locking red/black wire mod?
Failures are often down to corroded pins in the door connectors that affect these as well.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Aug 18, 2011 8:57 am

Remove the panel above the glovebox and examine the wiring loom running across the top.
There should be a two pin plug hanging from it which has two identical green wires going to it, and there should be a plug fitted into it which has a green wire and a green/red wire.
Look at the wiring looms in the area, and if you're lucky, you'll find an identical plug, fitted with a short loop of green wire, tied up to the loom. If there's one present, pull it free and use it to replace the plug mentioned above.
That should have disabled the immobiliser.
If there's no spare plug present, cut the green and green/red wires a couple of inches from the plug, and join them together to form a loop.
The alarm ECU is a blue rectangular box mounted above the engine ECU, right above the driver's right knee, if you want to remove it completely.
User avatar
maestego
E30 Zone Newbie
E30 Zone Newbie
Posts: 242
Joined: Tue Aug 09, 2011 11:00 pm

Post Thu Aug 18, 2011 9:20 pm

many thanks Brianmoooore

right on the money there with the blue box and all i had to pull out is the plug for the Magnetic key wiring,now sorted the alarm and fitted new one with fob and i still use the dead lock with key for safety and i have a kill switch in the fitted aswell :cool: