ITB Ideas?

Need technical Q/A then you're in the right place

Moderator: martauto

lance1a
South African/Scottish import
Posts: 1182
Joined: Sat Jul 29, 2006 11:00 pm
Location: oxfordshire

Post Thu Aug 18, 2011 6:26 pm

I bought a set of manifolds a few days back and since they are so pretty I feel the need to use them. Since I don't have an E30 at the moment I rectified that and should be picking up a 320i Touring on Sunday (the engine I specifically wanted). I was thinking of building a bike carb setup again like on my old M10 E30, mainly due to the expense of sourcing Webers twins. Bike ITB's are a destinct option though, so I just bought a set of 40mm ones and now need to find a matching set (to make up the 6 needed). Now my electrical knowledge is crap to say the least, so at the moment I'm thinking megasquirt, COP, wasted spark. Any ideas? Oh yeah.....need to change the cam too and more than likely the head. Anyone here ever run a M20B20 with an M20B25 head?

Image
Image
BMW E28 528i X2
Merc W126 300E twin turbo
Merc cosworth 190e 2.3-16
BMW E28 525E
BMW E28 M535i
Saab 900 Classic Turbo
BMW E24 Highline Cosmos
BMW E24 Highline silver
BMW E24 Macau Msport
BMW 1972 2002
BMW E36 Alpina B3 3.2 Switchtronic
Renault
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Thu Aug 18, 2011 6:51 pm

Missed you at the POD Rob, only found out late in the day when you went :(

Anyway, subscribed. :D
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
lance1a
South African/Scottish import
Posts: 1182
Joined: Sat Jul 29, 2006 11:00 pm
Location: oxfordshire

Post Thu Aug 18, 2011 7:13 pm

Hey Rav....sorry mate....Adi told me you were there but a mate turned up from far away so had to babysit. Hope all's well buddy. :wink:
BMW E28 528i X2
Merc W126 300E twin turbo
Merc cosworth 190e 2.3-16
BMW E28 525E
BMW E28 M535i
Saab 900 Classic Turbo
BMW E24 Highline Cosmos
BMW E24 Highline silver
BMW E24 Macau Msport
BMW 1972 2002
BMW E36 Alpina B3 3.2 Switchtronic
Renault
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Thu Aug 18, 2011 7:17 pm

All' well mate, will call you later. :cool:
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
MillRat
E30 Zone Newbie
E30 Zone Newbie
Posts: 249
Joined: Mon Dec 07, 2009 11:00 pm
Location: Santiago, Chile

Post Thu Aug 18, 2011 9:47 pm

My first thought is that 40mm throttles on a 2L six will be to big, unless you can choke them down to something that will be more driveable around town.

Can I ask where you got the manifold? I have not seen that design for an M20 before. It looks like it will let you run long trumpets without the risk of fouling the bonnet (as long as you have enough room before the strut tower). Also, will that design allow you to clear the brake booster?

Building an ITB setup for my race car is again on the cards (I will probably bolt the throttle bodies directly to the head though and run a twin fuel injector setup on long runners). I will watch your progress with interest.

Good luck.
Image

Cheers,
Michael.
lance1a
South African/Scottish import
Posts: 1182
Joined: Sat Jul 29, 2006 11:00 pm
Location: oxfordshire

Post Thu Aug 18, 2011 10:17 pm

Cheers MillRat. The inlet side of the manifold is 36mm so that might help, but I'm wondering about creating a transition between the 40mm and the 36mm step. I need to measure the inlet side of both B20 and B25 inlets on the head as well. And...how do airflow sensors etc come into play here?
I ran 40mm on my M10 (but that was a 4 pot so was 450cc per pot vs 333cc.) and it ran well once I sorted out the trumpets on the other side of the bike carbs. I also need to know what flow from the injectors is required.
Still a lot to work out though..... :mad:
BMW E28 528i X2
Merc W126 300E twin turbo
Merc cosworth 190e 2.3-16
BMW E28 525E
BMW E28 M535i
Saab 900 Classic Turbo
BMW E24 Highline Cosmos
BMW E24 Highline silver
BMW E24 Macau Msport
BMW 1972 2002
BMW E36 Alpina B3 3.2 Switchtronic
Renault
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Fri Aug 19, 2011 1:21 am

Chamber shape is very different between heads,as is piston top shape between 320/325.Valves are a little bigger on the 325 head,but these can be fitted to the 320 head with suitable mods.Inlet port shape also differs between heads.

320i revs well,produces its grunt mostly above 4000rpm,I would expect that you will need to do something with the valve train to safely up the rev limit to take full advantage of three twin choke carbs!
Youth is wasted on the young.
lance1a
South African/Scottish import
Posts: 1182
Joined: Sat Jul 29, 2006 11:00 pm
Location: oxfordshire

Post Fri Aug 19, 2011 6:16 am

Thinking about 284 cam or similar.
BMW E28 528i X2
Merc W126 300E twin turbo
Merc cosworth 190e 2.3-16
BMW E28 525E
BMW E28 M535i
Saab 900 Classic Turbo
BMW E24 Highline Cosmos
BMW E24 Highline silver
BMW E24 Macau Msport
BMW 1972 2002
BMW E36 Alpina B3 3.2 Switchtronic
Renault