help please is this the plug i need to re pin engine swap

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
RayC
E30 Zone Newbie
E30 Zone Newbie
Posts: 12
Joined: Mon Jul 25, 2011 11:00 pm

Post Sun Aug 14, 2011 7:44 pm

Hello all

as i didnt remove the loom and am not a BMW guy normally i need a bit of help, i'm putting a E36 M52 loom into an E30, is this the plug that needs to be re pinned (big one) bit confused as i didnt expect it to have a cover thing on the top , thanks

Ray

Image

Image
User avatar
kevo
E30 Zone Camper
E30 Zone Camper
Posts: 1234
Joined: Thu Sep 21, 2006 11:00 pm
Location: S.Wales

Post Sun Aug 14, 2011 10:45 pm

this has been answered in your other thread in the m50/m52 engine swap section mister. basically the one with the cover on is your diagnostics plug and you don't need to touch, the other two are the traction control one (i believe) and the remaining one with most pins is the one you need to modify.
Kev
User avatar
RayC
E30 Zone Newbie
E30 Zone Newbie
Posts: 12
Joined: Mon Jul 25, 2011 11:00 pm

Post Mon Aug 15, 2011 12:07 pm

thanks just need to double check my pins now :)