M42 Sounding Rough - With Video Now
Moderator: martauto
-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
Hey peeps, of recent the car is sounding very rough after start up. I know it needs a clutch, but surely this wouldn't be making the sound? I've not driven it anywhere, as I can't drive atm, but it seems to have gradually got worse since the last time I drove it. I started it up today and the noise does seem to die down after 10mins or so, but not by much.
View My Video
Any suggestions?
Many Thanks
View My Video
Any suggestions?
Many Thanks
Last edited by Pal318is on Fri Oct 14, 2011 5:39 pm, edited 2 times in total.
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
Anyone care to throw something into the mix? 
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
-
Duke137
- Married to the E30 Zone

- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
I think you would need to elaborate on what "rough" actually means mate
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
Gortour
- E30 Zone Team Member

- Posts: 9025
- Joined: Sat Sep 23, 2006 11:00 pm
- Location: Poole, Dorset
Sounding rough as in lumpy idle, bearing noise, ticking...?
Currently slumming it in an E46 Touring
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
excessive chain rattle?
oil level?
stick a vid up on youtube would be the best option.
I disassembled the entire top end only to find a new plug had de-cored itself, thus losing compression in on of the cyls, that got progressively worse & gave the oddest sporadic symptoms, sometimes the ceramic core would stick, then not.
fully weird one - in any case check all the ignition polava first imo
oil level?
stick a vid up on youtube would be the best option.
I disassembled the entire top end only to find a new plug had de-cored itself, thus losing compression in on of the cyls, that got progressively worse & gave the oddest sporadic symptoms, sometimes the ceramic core would stick, then not.
fully weird one - in any case check all the ignition polava first imo
-
DHFiS
- Old Skooler

- Posts: 2733
- Joined: Sat Aug 12, 2006 11:00 pm
- Location: cambridge
You are not driving the car atm and the noise is getting worse?
-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
Thanks for the replies. Apologies for not being a little bit more specific, just realized how vaugh my post was..
It's more of rattle tbh, which quietens down the longer car is running. Oil is ok as I've already checked that.
In all fairness I've not heard my chain ever rattle and I'm on my second engine since owning the car, however that does sound like what it could be.
I'm not driving my car, but I can still start it up
Thanks for all the help...
It's more of rattle tbh, which quietens down the longer car is running. Oil is ok as I've already checked that.
In all fairness I've not heard my chain ever rattle and I'm on my second engine since owning the car, however that does sound like what it could be.
I'm not driving my car, but I can still start it up
Thanks for all the help...
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
-
Gortour
- E30 Zone Team Member

- Posts: 9025
- Joined: Sat Sep 23, 2006 11:00 pm
- Location: Poole, Dorset
Are they hydraulic tappets? Have the oil changes been kept up regularly?
Currently slumming it in an E46 Touring
-
320Touring
- E30 Zone Team Member

- Posts: 12316
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Glasgow (Scotland)
Does it go away when you press in the clutch?
Could be the thrust bearing is goosed
Could be the thrust bearing is goosed
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
http://www.e30zone.net/modules.php?name ... 81#2766881
-
Gortour
- E30 Zone Team Member

- Posts: 9025
- Joined: Sat Sep 23, 2006 11:00 pm
- Location: Poole, Dorset
Did wonder the same, but Pal says the noise dies down after a few mins...
Currently slumming it in an E46 Touring
-
Duke137
- Married to the E30 Zone

- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
Sounds like rattling chain or possibly rattly valve gear
Is it a tappety noise?
Is it a tappety noise?
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
I think a video is the best thing. The noise does die down, but it's still there ever so slightly
Will get a vid up tomoz..thanks again.
Will get a vid up tomoz..thanks again.
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
Video added to original post

Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
that's the worst chain rattle/buzzz i've ever heard !
i wouldn't drive it any more without breakdown cover .
sorry to be the bearer of bad news Pal.
i wouldn't drive it any more without breakdown cover .
sorry to be the bearer of bad news Pal.

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
F$cking hell
I have breakdown cover, but havent drove the car since the original post, due to health reasons.
Best way to fix it mick? besides a new chain or is it just a case of new tensioner?
Many Thanks for bad news
I have breakdown cover, but havent drove the car since the original post, due to health reasons.
Best way to fix it mick? besides a new chain or is it just a case of new tensioner?
Many Thanks for bad news
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
a new tensioner cost about £35 i have a good one here for £18 posted [done about 5k miles]
it might shut it up for a bit but that needs a strip down and new chain
i also have all x 3 sprockets in vgc for £25 + about a fiver post.
all you need then is a chain and some gaskets and a mechanic m8
my sprockets in vgc.


it might shut it up for a bit but that needs a strip down and new chain
i also have all x 3 sprockets in vgc for £25 + about a fiver post.
all you need then is a chain and some gaskets and a mechanic m8
my sprockets in vgc.



m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
Mick can you pm me your number again pls. Got a new phone and lost all my numbers..
Thanks
Thanks
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
