Hi all, just looking at my wiring and after having searched the forum i'm still a little confused.
firstly, do i need to put a brown temp sensor onto my engine?
secondly on the m52 loom how to i wire this in as i don't seem to have a plug for it?
any help appreciated
Kev
clarification on brown temp sender m52 loom
Moderator: martauto
-
jimbob88
- E30 Zone Regular

- Posts: 428
- Joined: Fri Dec 24, 2010 11:00 pm
- Location: halifax
I was wndering this myself a few days ago. I know you need the brown temp sensor to send a signal to the e30 clocks, if your doing your own wiring i think you need to run a wire upto the c101 and then onto the temp gauge
The reason you dont hsve a plug is the m52 has a dual output sensor with 4wires. 2 to ecu 2 to temp gauge ( i think )
The reason you dont hsve a plug is the m52 has a dual output sensor with 4wires. 2 to ecu 2 to temp gauge ( i think )
-
kevo
- E30 Zone Camper

- Posts: 1234
- Joined: Thu Sep 21, 2006 11:00 pm
- Location: S.Wales
ah that was what i was hoping for, i'll have to get another plug from somewhere for the end of the sensor. if you could find the colours for me that'd be very much appreciated.
I'm starting to unravel the wiring bit by bit, one of the main things thats concerning me at the moment is the fact that my c101 plug seems to have totally different colours to the ones in the wiring diagram on the front page.
cheers
Kev
I'm starting to unravel the wiring bit by bit, one of the main things thats concerning me at the moment is the fact that my c101 plug seems to have totally different colours to the ones in the wiring diagram on the front page.
cheers
Kev
-
kevo
- E30 Zone Camper

- Posts: 1234
- Joined: Thu Sep 21, 2006 11:00 pm
- Location: S.Wales
Also, i saw a photo on one of the other posts of someone using an e30 blue and brown temp sensor? i thought that i was supposed to add a brown temp sensor and keep the original e36 one aswell? what has every one else done?
-
glenn
- Engine Transplant Services

- Posts: 2196
- Joined: Sat Jan 29, 2005 11:00 pm
- Location: blackwood, south wales
hello kev,
use the brown e30 sensor, then take the brown / violet wire from the 4 pin e36 plug, and put that to the brown e30 sensor.
i have one here if you need it
use the brown e30 sensor, then take the brown / violet wire from the 4 pin e36 plug, and put that to the brown e30 sensor.
i have one here if you need it
-
kevo
- E30 Zone Camper

- Posts: 1234
- Joined: Thu Sep 21, 2006 11:00 pm
- Location: S.Wales
nice one cheers mister, had a bit of bad luck just now too which has delayed me somewhat, the engine stand toppled over and damaged the side of the head. a bit annoying although fingers crossed it's repairable
-
randomspeedfreak
- E30 Zone Regular

- Posts: 992
- Joined: Mon Mar 15, 2010 11:00 pm
- Location: Bristol
im just going to do this aswell,
except my m20 brown temp sensor has only 1 pin on the plug?
except my m20 brown temp sensor has only 1 pin on the plug?
-
Jacko_
- E30 Zone Newbie

- Posts: 133
- Joined: Sat Sep 12, 2009 11:00 pm
- Location: Rossendale
^ correct 
E21 323i with 2.8 M52 on TBs (fast road / track car)
E28 M535i (track car project)
E36 328i touring (drift wagon daily driver)
E28 M535i (track car project)
E36 328i touring (drift wagon daily driver)
-
randomspeedfreak
- E30 Zone Regular

- Posts: 992
- Joined: Mon Mar 15, 2010 11:00 pm
- Location: Bristol
is the e36 plug in question the one on the left here? :
http://i9.photobucket.com/albums/a95/re ... old004.jpg
http://i9.photobucket.com/albums/a95/re ... old004.jpg
-
randomspeedfreak
- E30 Zone Regular

- Posts: 992
- Joined: Mon Mar 15, 2010 11:00 pm
- Location: Bristol
thanks, ill do this todaymaf260 wrote:^^^^^^^^^^^
yes
