and are they easy fit...does piston need to be out or in when fitted????
all comments welcome thank you......
REAR BRAKE CALIPER PISTON SEALS !!!
Moderator: martauto
-
E30cabrioman
- E30 Zone Newbie
- Posts: 190
- Joined: Mon Jul 18, 2005 11:00 pm
- Location: Scotland
Anyone no how much these are and maybe a part number ??
and are they easy fit...does piston need to be out or in when fitted????
all comments welcome thank you......
and are they easy fit...does piston need to be out or in when fitted????
all comments welcome thank you......
325i Cab
E39 V8
-
Templ8e30
- E30 Zone Addict
- Posts: 2801
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Ashton-under-Lyne, Lancashire
The rear caliper rebuild kit is part number 34211153194 and costs about Ԛ£8. You'll need 2 kits for the car.
The kit comprises: piston seal,dust seal,circlip.
The caliper needs to be properly stripped and cleaned with the piston out to fit the kit.
Relatively easy to fit but time consuming to do it carefully, the inside of the caliper and the piston need to be spotless
Cheers,
Iain T
The kit comprises: piston seal,dust seal,circlip.
The caliper needs to be properly stripped and cleaned with the piston out to fit the kit.
Relatively easy to fit but time consuming to do it carefully, the inside of the caliper and the piston need to be spotless
Cheers,
Iain T
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
-
E30cabrioman
- E30 Zone Newbie
- Posts: 190
- Joined: Mon Jul 18, 2005 11:00 pm
- Location: Scotland
I have calipers off and had old seals out(one side was split) thanks for part number and info was not sure if piston needed to come out for refit
cheer for info
Stu 
cheer for info
Stu
325i Cab
E39 V8