best brake setup advise needed and servo question :)

Need technical Q/A then you're in the right place

Moderator: martauto

LilJen
E30 Zone Newbie
E30 Zone Newbie
Posts: 130
Joined: Fri Oct 16, 2009 11:00 pm
Location: Anglesey, N.Wales

Post Mon Jul 04, 2011 6:19 pm

Hi my lovely fellow zoners :D

basically my brakes feel knackered, there's not much stopping power left, cant even make the car skid and they squeak. what I'm wondering is, whats the best I can put on there without it being major work? I've been looking at various discs/pads but not sure what brands are best.

the car was originally a 318 but from what I can gather it has the 325 brake setup.

also I was wondering, as I have a mk2 golf brake servo, will this hamper the effect of a decent brake setup, and if it would what would be needed to get a better servo? I hear a clio one does the job but not sure which and whats needed exactly

Thanks guys, sorry for asking so much :o:
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Jul 04, 2011 8:22 pm

Unless it has a M5x or s5x engine, why does it have anything other than a standard E30 servo fitted?
DHFiS
Old Skooler
Old Skooler
Posts: 2733
Joined: Sat Aug 12, 2006 11:00 pm
Location: cambridge

Post Mon Jul 04, 2011 8:55 pm

When were the discs/pads fitted and have you fully bled the brakes and changed all the fluid?
LilJen
E30 Zone Newbie
E30 Zone Newbie
Posts: 130
Joined: Fri Oct 16, 2009 11:00 pm
Location: Anglesey, N.Wales

Post Mon Jul 04, 2011 10:08 pm

Brianmoooore wrote:Unless it has a M5x or s5x engine, why does it have anything other than a standard E30 servo fitted?
sorry forgot to say that it's got an M50 engine.




The brakes are just well worn, I've never changed them, they passed the MOT ok month or so ago, but they have a lip on the disc and after use the rust doesnt get fully cleaned off, so i'd assume from that the pads are well worn?
Morat
E30 Zone Team Member
E30 Zone Team Member
Posts: 8943
Joined: Thu Feb 09, 2006 11:00 pm
Location: The Peoples Republic of Yorkshire

Post Mon Jul 04, 2011 10:16 pm

I had the same problem and was getting worried. Then I realised that the pad wear light wasn't actually faulty.... new pads and disks and I was happy again :)
E30 Touring 0.35 cD - more slippery than prison soap :)

Image
Praise the Lard... and pass the dripping!
LilJen
E30 Zone Newbie
E30 Zone Newbie
Posts: 130
Joined: Fri Oct 16, 2009 11:00 pm
Location: Anglesey, N.Wales

Post Wed Jul 13, 2011 9:24 am

does anyone have any recommendations or advice? anything to point me in the right direction would be great.
thanks
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Jul 13, 2011 10:11 am

LilJen wrote:
Brianmoooore wrote:Unless it has a M5x or s5x engine, why does it have anything other than a standard E30 servo fitted?
sorry forgot to say that it's got an M50 engine.




The brakes are just well worn, I've never changed them, they passed the MOT ok month or so ago, but they have a lip on the disc and after use the rust doesnt get fully cleaned off, so i'd assume from that the pads are well worn?
The performance from the brakes required to pass a UK MOT test is ridiculously low, so a MOT pass means very little.
What's the problem with the brakes? They don't work well or need excessive pedal pressure?
The two are completely different things - the brakes on an F1 car "work well" by any standards, but need seriously high pedal pressure to work them.
keri-WMS
E30 Zone Camper
E30 Zone Camper
Posts: 1269
Joined: Sat Apr 29, 2006 11:00 pm

Post Wed Jul 13, 2011 1:36 pm

LilJen wrote:The brakes are just well worn, I've never changed them, they passed the MOT ok month or so ago, but they have a lip on the disc and after use the rust doesnt get fully cleaned off, so i'd assume from that the pads are well worn?
Sounds like you need new discs and pads for starters, plus the rust staying on the disks hints at sticky calipers to me (either sticky pistons or sticky sliders).

Best bet is to get the new discs/pads in, and inspect the calipers when you go to fit them (lube up the sliders and check that the pistons push home easily / evenly etc etc).
WMS E30 brake kits! (4-pot 280mm & 300mm front / 2-pot 290mm rear)

www.wms-brakes.co.uk / http://www.e30zone.net/modules.php?name ... c&t=209737
LilJen
E30 Zone Newbie
E30 Zone Newbie
Posts: 130
Joined: Fri Oct 16, 2009 11:00 pm
Location: Anglesey, N.Wales

Post Fri Jul 22, 2011 12:57 am

I took the car out today for some brake tests. Was doing 30mph and attempted an emergency stop, it took about 4 seconds to stop which felt long, and the amount of pressure I had to put on the pedal was rediculous.
If I had to stop from a faster speed in an emergancy, I'd never do it in time. I've had the car nearly 2 years now, and don't remember it being that bad when I first got it, although they've never felt as good as the other cars I drive.
Doing this heavy braking did clean the rust off the discs.

I will be buying new discs and pads for front and rear. Is there anything else I should get checked/done at the same time?
keri-WMS
E30 Zone Camper
E30 Zone Camper
Posts: 1269
Joined: Sat Apr 29, 2006 11:00 pm

Post Fri Jul 22, 2011 1:25 am

I'd also be getting another (Golf?) servo and swapping it to see if it's failing...shouldn't be too painful to do?
WMS E30 brake kits! (4-pot 280mm & 300mm front / 2-pot 290mm rear)

www.wms-brakes.co.uk / http://www.e30zone.net/modules.php?name ... c&t=209737
Green
E30 Zone Squatter
E30 Zone Squatter
Posts: 1698
Joined: Wed Mar 17, 2010 11:00 pm
Location: Santa Pod

Post Fri Jul 22, 2011 1:30 am

I think the clio ones are better by design due to some diaphragm thingy inside. Just a thought.
Image
User avatar
alpinab6s
E30 Zone Newbie
E30 Zone Newbie
Posts: 5
Joined: Sat Jul 02, 2011 11:00 pm

Post Fri Jul 22, 2011 2:18 am

Check out 300mm.de for any brake setup!!!! winkeye
keri-WMS
E30 Zone Camper
E30 Zone Camper
Posts: 1269
Joined: Sat Apr 29, 2006 11:00 pm

Post Fri Jul 22, 2011 10:15 am

I think we're more trying to fault-find the existing brakes, but if it's upgrades that are needed: http://www.e30zone.net/modules.php?name ... 9&start=24

I still think it sounds like the servo has a problem due to the pedal forces you're talking about?
WMS E30 brake kits! (4-pot 280mm & 300mm front / 2-pot 290mm rear)

www.wms-brakes.co.uk / http://www.e30zone.net/modules.php?name ... c&t=209737
LilJen
E30 Zone Newbie
E30 Zone Newbie
Posts: 130
Joined: Fri Oct 16, 2009 11:00 pm
Location: Anglesey, N.Wales

Post Fri Jul 22, 2011 12:30 pm

I've set my mind on getting a new brake set up, just need to see if I can go bigger with no issues.
The concern was, even after that, would they still feel poop. Ill look up the Clio servo, its the one off the plastic wing shape? From what's been said, sounds like the servo is either on its way out or just no good.

Ill do some research this weekend and update you on what I find. Thanks for helping out a confused gal :D
keri-WMS
E30 Zone Camper
E30 Zone Camper
Posts: 1269
Joined: Sat Apr 29, 2006 11:00 pm

Post Fri Jul 22, 2011 12:37 pm

No problemo! Have a good read of these (they both go on a bit but everything is covered):

www.e30zone.net/e30zonewiki/index.php/Brake_Upgrades
and
http://www.e30zone.net/modules.php?name ... c&t=113229

What size wheels are they (in terms of what bigger stuff will fit)? Look like 16" Alpinas or 17" Alpina replicas? (some replicas are 16" as well, Gareth had a set like that)
WMS E30 brake kits! (4-pot 280mm & 300mm front / 2-pot 290mm rear)

www.wms-brakes.co.uk / http://www.e30zone.net/modules.php?name ... c&t=209737
LilJen
E30 Zone Newbie
E30 Zone Newbie
Posts: 130
Joined: Fri Oct 16, 2009 11:00 pm
Location: Anglesey, N.Wales

Post Fri Jul 22, 2011 12:47 pm

They are 16" alpnias, and from what I'm aware its a 325 brake setup (if that makes a difference to what fits)
keri-WMS
E30 Zone Camper
E30 Zone Camper
Posts: 1269
Joined: Sat Apr 29, 2006 11:00 pm

Post Fri Jul 22, 2011 1:24 pm

The fact you have 325i (ie vented) brakes doesn't make any difference in terms of moving forward with bigger upgrades if that's what you're planning. The Alpina wheel is a bit of a pain for brake upgrades, in terms of our stuff fitting:

280x22mm WMS kit fits.
298.5x24mm WMS kit apparently fits (just) with a 6mm wheel spacer.

I'd check out that servo first, and then if you're still not happy the 280mm kit would make more sense than squeezing in the bigger one but running thick spacers (unless you don't mind spacers and longer bolts).
WMS E30 brake kits! (4-pot 280mm & 300mm front / 2-pot 290mm rear)

www.wms-brakes.co.uk / http://www.e30zone.net/modules.php?name ... c&t=209737
LilJen
E30 Zone Newbie
E30 Zone Newbie
Posts: 130
Joined: Fri Oct 16, 2009 11:00 pm
Location: Anglesey, N.Wales

Post Sat Jul 23, 2011 10:00 am

Ive read throught those links, theres some great info there, thanks.
i need tyres and suspension too, so i cant afford the full kits, think ill just get new discs and pads all round and get the calipers cleaned up while they are off the car.
keri-WMS
E30 Zone Camper
E30 Zone Camper
Posts: 1269
Joined: Sat Apr 29, 2006 11:00 pm

Post Sat Jul 23, 2011 11:29 am

No problem. Sounds like a plan! :D
WMS E30 brake kits! (4-pot 280mm & 300mm front / 2-pot 290mm rear)

www.wms-brakes.co.uk / http://www.e30zone.net/modules.php?name ... c&t=209737
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sat Jul 23, 2011 1:01 pm

Clio servo is the first job you should be doing 8)
keri-WMS
E30 Zone Camper
E30 Zone Camper
Posts: 1269
Joined: Sat Apr 29, 2006 11:00 pm

Post Sat Jul 23, 2011 1:50 pm

I'm not 100% sure - if the discs are still rusty that would be my first choice (as discs/pads will need doing in any case)?

Not much point doing it all at once as you'll never find out what the problem was (friction bits or servo).
WMS E30 brake kits! (4-pot 280mm & 300mm front / 2-pot 290mm rear)

www.wms-brakes.co.uk / http://www.e30zone.net/modules.php?name ... c&t=209737
LilJen
E30 Zone Newbie
E30 Zone Newbie
Posts: 130
Joined: Fri Oct 16, 2009 11:00 pm
Location: Anglesey, N.Wales

Post Sat Jul 23, 2011 2:33 pm

the brake warning light on the dash goes on and off while driving, thats what originally made me want to look up new brake options. but after doing research, ive heard people mention the golf servo isnt the best option, hence why i was wondering about the clio one.

so do I change all the disks/pads and clean calipers (or 4 pot conversion which im considering) then see how they are, and if its still not right, then go for the servo option?

I can change my own disks, but anything more technical than that and i have to ask a mechanic friend to do it, so dont want to give him unessasary work
keri-WMS
E30 Zone Camper
E30 Zone Camper
Posts: 1269
Joined: Sat Apr 29, 2006 11:00 pm

Post Sat Jul 23, 2011 3:25 pm

I'd fix the problem before fitting an upgrade - so servo (and/or dash-light-cause) before 4-pots. Once it's all working as it should (but you still want more) then look at upgrades in my opinion.

The only daft course of action would be to fix the servo (or check it's ok), then fit all new std discs/pads....and THEN get a WMS kit as you'll be doing the same job twice!

Are you able to test-drive another E30 with ok standard brakes to get an idea if it's good enough (for you personally) when working properly?
WMS E30 brake kits! (4-pot 280mm & 300mm front / 2-pot 290mm rear)

www.wms-brakes.co.uk / http://www.e30zone.net/modules.php?name ... c&t=209737
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sat Jul 23, 2011 3:34 pm

Keri the golf servo's are shite, clio are much better and the best performing for the size I have found. IMO it should be swapped anyway, but as you state if the rust hasnt cleared off the friction surface then something is wrong caliper end
keri-WMS
E30 Zone Camper
E30 Zone Camper
Posts: 1269
Joined: Sat Apr 29, 2006 11:00 pm

Post Sat Jul 23, 2011 3:46 pm

I suppose maybe the thing to do is get the servo and new pads/discs. Then change the servo one afternoon....drive it to see what it's like....then put the new pads/discs on and check the calipers as a matter of course?

(I hate brakes! :D )
WMS E30 brake kits! (4-pot 280mm & 300mm front / 2-pot 290mm rear)

www.wms-brakes.co.uk / http://www.e30zone.net/modules.php?name ... c&t=209737
LilJen
E30 Zone Newbie
E30 Zone Newbie
Posts: 130
Joined: Fri Oct 16, 2009 11:00 pm
Location: Anglesey, N.Wales

Post Sat Jul 23, 2011 3:47 pm

well I will more than likely be getting new disks etc anyway, as they do look well used, but I will take your advice and change the servo first to see how much difference that makes, then decide from that what brake setup option to go for.

just one more question, if I was to buy a clio servo from brakers/ebay etc, would I need more than just the servo? I read that people use the E30 master cylinder, would this have still been used when the previous owner fitted the golf one? Ive not actually got the car with me at the moment, so its a bit awkward to go and investigate myself.

E30s are a rare thing round here, so dont know anyone with one that i can ask to see. we did used to own a standrad 318 a few years back, and the brakes didnt feel under powered or anything.

If it wasnt such a big job, id borrow the servo off our runaround, as that happens to be a plastic winged clio
keri-WMS
E30 Zone Camper
E30 Zone Camper
Posts: 1269
Joined: Sat Apr 29, 2006 11:00 pm

Post Mon Jul 25, 2011 3:40 pm

This might be of interest, messing about with a Clio servo: http://www.e30zone.net/modules.php?name ... ght=brakes
WMS E30 brake kits! (4-pot 280mm & 300mm front / 2-pot 290mm rear)

www.wms-brakes.co.uk / http://www.e30zone.net/modules.php?name ... c&t=209737
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Mon Jul 25, 2011 6:52 pm

LilJen
E30 Zone Newbie
E30 Zone Newbie
Posts: 130
Joined: Fri Oct 16, 2009 11:00 pm
Location: Anglesey, N.Wales

Post Fri Oct 07, 2011 10:11 pm

I got a clio servo fitted. but found it a bit confusing trying to explain to someone what was required. I've heard mention of a spacer but I've no idea where this actually goes.
I was using the E30 Master Cylinder, should the clio one be fitted instead? I was thinking this as when the rod (the one with the dome head) goes into the master cylinder, it seems like its too thin and just rattles around in there.

I'm not doing the work myself, I am getting a friend to do it, so its tricky to try and explain something to them just from reading snippets on here.