Parts needed

Post Mon Jun 27, 2011 10:09 pm

Need a crank sensor for a pre facelift 320i Coupe M20B20 L-Jetronic
I am not sure of the part number.

Post Thu Jun 30, 2011 7:08 am

i looked on REALOEM for ya and this is the part number you need 12141720852...

also i put the part number into google and it came up with this just to give you an idea on a new one http://www.europartsshop.com/bmw-crank- ... 20852.html..

hope this has helped a little failing that try asking" sweep "if he has one that man got everything else.

Post Thu Jun 30, 2011 3:18 pm

Thanks will check it out , i'll get mine removed and make sure it looks the same.

Post Mon Jul 04, 2011 10:07 am

Hi There

can i get chassis number

Thanks

Brett

Post Mon Jul 04, 2011 7:55 pm

Sure here ya go :
WBAAA320909498630

Post Thu Jul 07, 2011 3:17 pm

Any luck?

Post Tue Jul 12, 2011 10:09 am

Hi there

i make this a differant part number, can you tell me where it fits and how its held on(does it push into a clip or does it have a hole in the side for a bolt)

Thanks

Brett

Post Wed Jul 20, 2011 7:35 pm

This is the part number according to RealOem :

12121722587

Post Tue Jul 26, 2011 7:44 am

Hi There

I make the part number 12521279695 £34.10
bu i will quote on your number 12121722587 £83.59

where does your fit? the number i have gone for fits into the front cover and points towards the bottom pully

Prices inc. E30Zone Discount and VAT delivered to mainland UK
Please call our Parts Dept. on 01242 257999 and quote 18520

There is a P&P cost of £1.99 on all orders under £20

Please remember if you require an urgent response drop our
Parts Department an email

partscheltenham@cotswoldgroup.com

Thanks

Brett

Post Tue Jul 26, 2011 4:58 pm

Thanks a lot for your help Brett . I checked the part out the one you checked is indeed the correct part. However after double checking i found the source of my problem was the ECU . i manage to get another ECU and after using that the car starts and runs perfectly!
Thanks for the doublecheck on the number.