Euro style E30, M-Tech II, Ac Schnitzer, DTM Fiberwerkz

[snooka]

CF licence plate holder

[snooka]

nekeer iets betere foto's... ma ik hoop dat het zondag of maandga is goed weer is dat ik echte goeie foto's kan trekken in de zon

[toole325i]

Those schnitzers are incredible man!!!!

[snooka]

let's pray for some nice weather 10July ;) and i'll be @ Santa Pod

[snooka]

[tonybtonyb]

Your car looks super

[bedumon]

I love ACS type 1 splits but they really don't fit.......

Sorry but not my cup of tea, but everyone has their own style.

[Gristo]

Nice car, especially the AC wheels, I think they fit perfectly! It's what proper German tuning is about. Are they 10" wide and what kind of lowering you are using?
I'm using 10" Brock B1 wheels and -40mm lowering at rear and there is not much room between rims and wheel arches(about 15mm only ). So at a moment I can't use back seats. How did you sorted out this?
I read about the Santa Pod, is it just a car show and is there any fee if I would like to take part of this?
Keep up the good work!!

[snooka]

there is special topic about Santo Pod, E30zone is there every year ;)




it's only a 9.5 at the rear, these are E46 wheels... that's why they come out a bit to much...

i have a KW V2 can't go much lower, at the front i can just fit a paper between the tire and arch (when i'm not in the car..)

[bedumon]

Nice car, especially the AC wheels, I think they fit perfectly! It's what proper German tuning is about. Are they 10" wide and what kind of lowering you are using?
I'm using 10" Brock B1 wheels and -40mm lowering at rear and there is not much room between rims and wheel arches(about 15mm only ). So at a moment I can't use back seats. How did you sorted out this?
I read about the Santa Pod, is it just a car show and is there any fee if I would like to take part of this?
Keep up the good work!!

You need to think about puling/flaring arches, playing around with camber and running a stretch. My car used to rub all the time, but after I rolled and pulled the arches it doesn't rub. I'm running 9J at the back with a bit of a stretch....Still rubs when got a few lads in the back.

[snooka]

arches are already fully streched

and 205/40 17 on a 8.5 rim
225/35 17 on a 9.5

it's good like that, just going to change te camber a bit and its perfect

[270bhps14]

Just been flicked through your post , could not see how the kit would work , but how wrong was I looks stunning real nice ride

[snooka]

low low low

some pics of the new exhaust line ;)

[snooka]

got Myself an M44 engine now i'm planning some tuning before mounting..


M47 (E46 320d) crank
S50 (E36 M3) pistons
make Cilinders 86mm (now85mm)
new computer

...

[kingcruizer]

loving this car fella. it just gets better every time i look.

p.s. i want your bonnet

clive

[snooka]

new headrest, from E36 M3, looks younger now

[McGoo]

loving the car mate, where did you get the carbon number plate surround from?

[snooka]

ebay.com

from US, i think it was 110$ after 8days delivered at home

[snooka]

[goosiegander]

Cool!

[snooka]

finally bought a new engine...

it's a M44 (318is from E36 '96)

but like u should know, i will not put the engine in like this winkeye

plans:

New Crank (M47)
New Pistons (S50)
Custom steering computer

this should make it almost 2.1L

i don't know how to call all the work i'm goin' to do in English (I speak dutch..)

But the building should start around september, first recolting all the info and parts to do the swap

and finaly around marsh the engine, and engine bay should be finished, 200hp???

[Forsman]

Wow, odd choice of engine. Never seen anyone do that swap!

Looks great now btw!

[suchy]

Nice fat proper Euro look
Not to everyone's liking but done very well

Need an engine to suit, good luck translating engine build from Dutch to English

Another car to check out at the 'Pod

[djsimmy]

top work and everything but that is ugly! bodykit makes my eyes bleed. defo not euro look at all

[suchy]

No it's not the uber-minimal Euro look I'll grant you that, but it Euro

[djsimmy]

just fustrating because i like everything about it the arches the wheels i even like the bonnet but the bodykit just ruins it all

[snooka]

well.. the rear bumper isn't that chocking? and sideskirts are cleaned...

the front bumper.. ye i know, just wanted something different, and this style fits with the rest, one day maybe an Alpina or M-Tech II, but got enough worries now with the engine

[djsimmy]

i am being a bit harsh on the car ist just not to my taste#. i like the side skirts

the arches are a work of art

[snooka]

27june i have the first appointment for my engine (the 318is M44 i bought and putting into 2.1L)

time to discus all the parts we will need, swap will only be for this winter

looking between 3 ITB

Jenvey, Db-Ilas and the one on the 2last pics

http://www.jenvey.co.uk/home/standard-k ... -kit-ckb01









the pistons will be from JE-Pistons
Exhaust From hartge (like now)
ECU will be this one (or kinda) http://www.k-data.org/kdfi-pnp-bmw-m42.html


maybe i'll also order some VAC parts, cilinder head, rod ..

http://store.vacmotorsports.com/vac---m ... p1750.aspx


just a new project :p need to be over 200Hp and need to be 4-cilinder ;) without turbo or charger

[snooka]

low car? engine waiting for a lot of mods...

[snooka]

Went to Visit Janssen (Janssen-motorenrevisie.nl)

at tha back an Z3 coupé M

parking full E30


Janssen will be doin' the followin':

Make Cilinders 86mm
Balance and mout the M47 crank
Mount the pistons and rod

It Will be JE-Pistons, adapted to be mounted on 140mm rods, JE does all the custom work

But!! Janssen doesn't make the engine run or mount it in my car... luckely het knew somebody who did this conversion a year ago, and only lived 2 streets farther

BAS ROOS Motorsport



they will make the engine start ready

and than the car goes on a trailer to http://www.boltuning-parts.nl/ to prepare the motor managment

the ITB will be a Jenvey

also bought some yellow stuff

[snooka]

fresh pics, cell phone pics :? :?

[defjammin]

I love it!!! the front bumper sets the bonnet off i think, btw where did you get the bumper from and how much i really want one now

[snooka]

well.. i just ordered a M-tech II bumper

so thaty makes this one for sale in a few monts when the new one is on and painted..

coming to Santa Pod this weekend? i'll be there

[m8782538]

How on earth did they manage to hit your E30, they were in a honda Jazz, its a tiny shoebox, tallentless drive who doesn't know where the brake pedal is i think.