I bought a 1988 318i Auto today, and the only real problem is what feels like a lumpy idle if you hold the car in drive on the brake. Feels like the engine keeps surging. I've changed the leads a plugs but it's still doing it. Any ideas or is it a case of, "They all do that mate"? It's the M40 engine.
Thanks in advance
M40/auto surging idle problem
Moderator: martauto
-
Jem
- E30 Zone Newbie

- Posts: 110
- Joined: Fri Oct 28, 2005 11:00 pm
- Location: Wisbech, Cambridgeshire
-
Jem
- E30 Zone Newbie

- Posts: 110
- Joined: Fri Oct 28, 2005 11:00 pm
- Location: Wisbech, Cambridgeshire
Just to add, it is a bit lumpy at idle when in park/neutral but fine once it's on the move. Would it be worth changing the cap and rotor arm?
-
optima
- E30 Zone Newbie

- Posts: 130
- Joined: Wed Oct 26, 2005 11:00 pm
- Location: cardiff
it sounds like a air leak again check the hose from the air flow meter
-
Jem
- E30 Zone Newbie

- Posts: 110
- Joined: Fri Oct 28, 2005 11:00 pm
- Location: Wisbech, Cambridgeshire
I've just taken the hose from the AFM to the throttle body off, and examined it, and there are not tears in it, so it's not that. Worth checking though.optima wrote:it sounds like a air leak again check the hose from the air flow meter
-
Sharknose3
- E30 Zone Newbie

- Posts: 121
- Joined: Mon Feb 21, 2005 11:00 pm
- Location: Amsterdam, Netherlands
I had similar surging with an M40 and replacing the fuel filter cleared the problem completely.
Sharknose
Sharknose
-
Jem
- E30 Zone Newbie

- Posts: 110
- Joined: Fri Oct 28, 2005 11:00 pm
- Location: Wisbech, Cambridgeshire
Thanks for the help so far guys, here's an update.
I've so far changed:
Sparkplugs,
Plug Leads,
Fuel Filter
I have cleaned with carb cleaner:
AFM
Throttle body (didn't take it of, just sprayed into the body with the throttle closed and open)
Idle Control Valve
It's running slightly smoother, but not much. The surging when held on the brakes in drive is much better, and will be perfect if I can sort the lumpy idle.
I've pulled the plug leads off one by one with the engine running, and they all cause the engine to run rougher.
I've had the cam cover off, and the cam looks in good condition.
I've done a compression test:
1 = 161 psi
2 = 165 psi
3 = 165 psi
4 = 165 psi
I'm running out of ideas. What would you check/change next?
I've so far changed:
Sparkplugs,
Plug Leads,
Fuel Filter
I have cleaned with carb cleaner:
AFM
Throttle body (didn't take it of, just sprayed into the body with the throttle closed and open)
Idle Control Valve
It's running slightly smoother, but not much. The surging when held on the brakes in drive is much better, and will be perfect if I can sort the lumpy idle.
I've pulled the plug leads off one by one with the engine running, and they all cause the engine to run rougher.
I've had the cam cover off, and the cam looks in good condition.
I've done a compression test:
1 = 161 psi
2 = 165 psi
3 = 165 psi
4 = 165 psi
I'm running out of ideas. What would you check/change next?
