Installing my Wild Zone Chip Help Please!!

[stevo_sideways]

Hi Lads,

Im honestly not being lazy but having looked around the site for the past 40 mins trying to find an installation guide or thread for my Zone Chip i've given up.

Does anyone have any information on what i need to do to install my chip please? i was hoping to put it in tomorrow.

Im fairly certain Ant sent me instructions but they have been lost and i do not want to start messing with the ECU until i know exactly what i'm at.

Any help is appreciated!!

Cheers,

Stevo

[Ant]

http://www.e30zone.co.uk/modules.php?na ... hnchip.htm

its easy dude, if you need talking through it use the number I gave ya M8

[stevo_sideways]

Once again you've proved yourself to be a gent.

Cherrs mate,

If i run into difficulty i'll give you a bell.

[jonbuoy]

Take the casing off the ecu and you will see a chip board.
You will also see a plastic casing that has the original chip in.
Take this case off and you will have access to the chip but be careful.
The chip is quite tight but the teeth attached to it are fragile, you will bend them.
Pull that out, stick the other one in.
Don't put it all back together just yet cos' it can be put in the wrong way round
Try to start the car and see what happen's.
If it starts straight away then switch off and put everything back together, if not, then turn it round and see what happen's.

Once all back to together start up and leave to settle for 10mins then go for a ride, treat it like a new baby at first as the ecu is re-learning the system.

Hope that helps

[stevo_sideways]

Take the casing off the ecu and you will see a chip board.
You will also see a plastic casing that has the original chip in.
Take this case off and you will have access to the chip but be careful.
The chip is quite tight but the teeth attached to it are fragile, you will bend them.
Pull that out, stick the other one in.
Don't put it all back together just yet cos' it can be put in the wrong way round
Try to start the car and see what happen's.
If it starts straight away then switch off and put everything back together, if not, then turn it round and see what happen's.

Once all back to together start up and leave to settle for 10mins then go for a ride, treat it like a new baby at first as the ecu is re-learning the system.

Hope that helps

THank mate,

As usual the members of this site prove to be faultless in their willingness to help other E30 owners in their hour of need.

Have a good weekend im off to install my new chip tomorrow

[jonbuoy]

Cheer's mate, have fun

[Demlotcrew]

There is a notch on the chip and Eprom seat so that you dont put it in the wrong way!

Andrew