Gaz coilover adjustable front topmount

[tomson]

Are these available seperately does anyonw know and if so where can I buy some ?

Gaz's website does not tell me if they are available seperately

[BadDave]

PM'd Tom

[tomson]

Uploaded with ImageShack.us

These are what I have but I believe there is a piece missing Dave ? I wish I'd realised when I bought them...

[BadDave]

Roller bearing and retaining clip Tom?

[tomson]

TBH I'm unsure, I can only get 2 holes to line up on the strut tower, not all 3 as per this photo -



Uploaded with ImageShack.us

I saw these below mounts in the RPM section and it made me realise why they dont fit as there is a piece missing, I think !

http://www.e30zone.net/modules.php?name ... c&t=146963

Cant remember the zoner I bought them from to ask him if he still has the bits im missing

[SteMarsden]

I had these before I fitted the RPM topmounts.

The aluminium eccentric part fits at the inside of the turret top, and you have to elongate 2 of the 3 mounting holes to get them to fit.

You dont need the original rubber topmount (which you may have just shown to illustrate)

HTH.
Ste.

[RPM]

TBH I'm unsure, I can only get 2 holes to line up on the strut tower, not all 3 as per this photo -



Uploaded with ImageShack.us

I saw these below mounts in the RPM section and it made me realise why they dont fit as there is a piece missing, I think !

http://www.e30zone.net/modules.php?name ... c&t=146963

Cant remember the zoner I bought them from to ask him if he still has the bits im missing

Hi Tom

Ours are a completely different design to the ones you have.

Yours are a one piece mount that rotates to give you adjustment, unfortunately you can adjust camber and castor independantly and the adjustment is limited.

I can supply spares for your mounts though if you do need anything.

Or better still upgrade to ours ;)

Jimmy

[Black_Potato]

Yeah.. buy some off Jimmy and flog your others

[tomson]

Thanks for the advise guys.

Am I actually missing anything from my current topmount ? I cant believe a company like Gaz makes the mounts like this and expect you to elongate the turrent holes ??

[SHAZ325iSPORT]

im using the ones pictured on my gaz coilovers,i had to drill another holeout aswell because only 2 bolts lined up.

worked well with my setup.