M30 santa Pod soot out.
Moderator: martauto
-
leeparkes
- Married to the E30 Zone

- Posts: 9538
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Looks like it
i got 14.5 last year, with this new donk im hoping to scrape into 13's but id be happy with low 14's.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
e30topless
- E30 Zone Team Member

- Posts: 13598
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
what's the new donk ?leeparkes wrote:Looks like iti got 14.5 last year, with this new donk im hoping to scrape into 13's but id be happy with low 14's.
-
leeparkes
- Married to the E30 Zone

- Posts: 9538
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
M30/b35 out of an Alpina B10. Spec over a standard M30 is,e30topless wrote:what's the new donk ?leeparkes wrote:Looks like iti got 14.5 last year, with this new donk im hoping to scrape into 13's but id be happy with low 14's.
Forged custom mahle pistons (high comp)
M5 conrods
Flowed head with hemi combustion chambers
Larger valves
268 degree cam
Remapped ECU
Result 261hp (346Nm torque)
Oh and ive also fitted a 7.5kg fly
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
e30topless
- E30 Zone Team Member

- Posts: 13598
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
nice ! 261 is quite good for an M30 !leeparkes wrote:M30/b35 out of an Alpina B10. Spec over a standard M30 is,e30topless wrote:what's the new donk ?leeparkes wrote:Looks like iti got 14.5 last year, with this new donk im hoping to scrape into 13's but id be happy with low 14's.
Forged custom mahle pistons (high comp)
M5 conrods
Flowed head with hemi combustion chambers
Larger valves
268 degree cam
Remapped ECU
Result 261hp (346Nm torque)
Oh and ive also fitted a 7.5kg fly
will be good to see how it performs
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27985
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
- Contact:
Ha ha, just spotted this, i'm not 100% on this year, might be over in Oz, but I have got another diff to slot in, and i'll have to source a flywheel too.zaust wrote:↑↑↑ Long way behind![]()
Nice spec on that. I done 2 run's last year, got a 14.7 and a 14.6. With on gas either. So will have the gas on this year for sure.

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27985
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
- Contact:
It will if you put the 4.27 in to it, innit bruvgareth wrote:I'll probably have a crack at itI suspect mine won't be the quickest though

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
- Cypriotgeeza
- E30 Zone Addict

- Posts: 3032
- Joined: Sat Apr 04, 2009 11:00 pm
- Location: Under a bonnet somewhere..
Same here mate!ImysE30 wrote:Finger's crossed
Check my M30 build threads:
Project Frankenstein: viewtopic.php?f=25&t=194154
Headgasket: viewtopic.php?f=55&t=165704
Clutch issues: viewtopic.php?f=55&t=172482
Instagram: www.instagram.com/Cypriotgeeza
Project Frankenstein: viewtopic.php?f=25&t=194154
Headgasket: viewtopic.php?f=55&t=165704
Clutch issues: viewtopic.php?f=55&t=172482
Instagram: www.instagram.com/Cypriotgeeza



