Design Edition Cabby

Tue Mar 22, 2011 9:29 pm

Well???

Wed Mar 23, 2011 7:08 am

adit wrote:Well???

just the man

Adi i need an under dash panel if you have a good one? Craig had an argument with it and it lost :lol:

Thu Mar 31, 2011 9:42 pm

Sun was out today so dropped the roof down for the afternoon and took a few pics

could do wih a good clean as i havnt had the time lately but not working this weekend so will be getting a good clean up before going into the bodyshop

had a big set back with an insurance hike so had to pull out of buying the hardtop id bagged from Paul (Z3I) Being a gent he knidly offered my deposit back in full. nice genuine fella and no doubt will be the man i contact when i do get round to getting one again.

managed to find a little time during work to fit the rear head rest kit and headrests that have been sitting in a cupboard for a month along with some clear side repeaters.

Anyway heres a few pics from today

One of the 6 Pot

in desperate need of an LSD as the 4.10 diff is dying lol and its costing me a small fortune being in such high revs all the time, 3.64 LSD to come over the weekend

After alot of thought and some time scanning through pics of cabs wiith and without spoilers i have decided not to have a spoiler so the original Tech II spoiler will go in the garage and the fibre glass crap will go in the bin!

Thu Mar 31, 2011 11:52 pm

Looks very nice Murphy

Fri Apr 01, 2011 2:49 am

This is what happens to small case diffs used with a 2.7...

Yes,they are input shaft bearing rollers that have passed through the diff cage to end up enbedded on the inside of the rear cover,you have now been warned!

Sat Apr 02, 2011 4:59 pm

daimlerman wrote:This is what happens to small case diffs used with a 2.7...

Yes,they are input shaft bearing rollers that have passed through the diff cage to end up enbedded on the inside of the rear cover,you have now been warned!

i think its fair to say the small case diff is ready to give up :lol:

i have bought a 3.64 LSD from Mick_318is

so that will be getting fitted next weekend and the current diff will be in the bin lol

Sat Apr 02, 2011 5:04 pm

have you collected the Diff yet ?

Sat Apr 02, 2011 5:16 pm

Well early this morning I dropped the cabby off at a mates bodyshop to have a bit of work done

Jobs include having passenger side rear arch repaired due to a bad repair by the previous owner which has now fell apart

Having the front arches rolled and the grills and eyebrows sprayed in black to freshen up the front end

And having Tech II kit sprayed and fitted along with removal of the Tech II spoiler and having no spoiler back on.

3.64 LSD and Gaz Gold Coilovers will be arriving next week too

should be picking up Thursday, Pics to follow.

Sat Apr 02, 2011 5:22 pm

gonna look good this m8

Sat Apr 02, 2011 7:07 pm

cant wait to see the tech 2 kit on it

Wed Apr 06, 2011 9:20 pm

Dropped the cabby off at the bodyshop on saturday and after being stuck in a 1.0L corsa for the week i was more than happy to recieve the call today letting me know it was ready to pick up

Had Tech II kit fitted, boot spoiler removed, grills and eyebrows freshened up in satin black, front arches rolled and had the passenger side rear arch repaired. Hes done a great job and im over the moon with it.

suprised how much of a difference it makes having no spoiler, i think it looks 100% better

anyways enough waffle, heres afew pics. not the best as was just outside the bodyshop but ill get some better pics up tomorrow

Wed Apr 06, 2011 9:27 pm

swit swoo mate

Wed Apr 06, 2011 9:28 pm

Wed Apr 06, 2011 9:37 pm

Makes me want to get my deisng cab on the road....

Wed Apr 06, 2011 10:47 pm

Nice one Murph

Wed Apr 06, 2011 10:50 pm

looks well now Murphy

more pics needed dude

Thu Apr 07, 2011 12:33 am

looking good mate, gives me a good idea of what mine will look like. Did you have to modify the side sills?

Thu Apr 07, 2011 1:04 am

l16ydl wrote:looking good mate, gives me a good idea of what mine will look like. Did you have to modify the side sills?

good question as the kit came off a 2dr .

Thu Apr 07, 2011 9:23 pm

magpie wrote:looks well now Murphy

more pics needed dude

Some more pics as requested

Could do with giving her a good clean up at the weekend and maybe find a decent location for some better pics.

Also took delivery of a 3.64 LSD today to replace the small case diff, And a set of Gaz Gold Coilovers

l16ydl wrote:looking good mate, gives me a good idea of what mine will look like. Did you have to modify the side sills?

Not sure on what he had to do mate as he was busy when i went round so not muc time to chat, but im round there tomorrow so i will ask him and let you know.

Thu Apr 07, 2011 9:31 pm

Dont like it

on the other hand.... If it was mine...

Thu Apr 07, 2011 9:35 pm

Nearly there Murphy, just one or two finishing touch's to go.

Thu Apr 07, 2011 10:54 pm

Your ride was sweet but now its even sweeter!

Sat Apr 09, 2011 8:08 pm

hey murphy was it you on the A1 around the metro this afternoon with the roof down? I was in the grey motorsport! Roof up as have just had a new one fitted and need to stretch it a bit more. Car looks great.

Sun Apr 10, 2011 8:16 pm

Thanks for the comments guys

ben9040 wrote:hey murphy was it you on the A1 around the metro this afternoon with the roof down? I was in the grey motorsport! Roof up as have just had a new one fitted and need to stretch it a bit more. Car looks great.

yeah that was me mate

i did wonder why you had the roof up :lol:

where did you get the new roof done?

Lovely motorsport mate looks very nice

Sun Apr 10, 2011 9:35 pm

cheers mate, got it done at autotrimming in Redcar down Boro way, highly recommended and well priced!

Sun Apr 10, 2011 9:46 pm

ben9040 wrote:cheers mate, got it done at autotrimming in Redcar down Boro way, highly recommended and well priced!

how much they charging? mine could do with a fresh one as its got a few marks and the rear windows cloudy

Mon Apr 11, 2011 12:32 pm

Fitting was £200 including fitting new seals and tension straps, not bad as it took them 2 and a half days. I sourced the roof and bits myself, got it from BAS and seems to be really good quality.

Mon Apr 11, 2011 12:39 pm

looks great

since its got the whole tech II kit i would refit the spoiler and some 15" bbs, would look awsome like that i recon

Mon Apr 11, 2011 12:54 pm

no spoiler ftw

Mon Apr 11, 2011 1:29 pm

magpie wrote:no spoiler ftw

+1 Looks good as it is, looking forward to seeing it in the flesh

Mon Apr 11, 2011 1:41 pm

Duke137 wrote:
magpie wrote:no spoiler ftw
+1 Looks good as it is, looking forward to seeing it in the flesh

+2 Looks great and defo no spoiler.

Mon Apr 11, 2011 8:23 pm

Rav335uk wrote:Nearly there Murphy, just one or two finishing touch's to go.

any news on that?

ben9040 wrote:Fitting was £200 including fitting new seals and tension straps, not bad as it took them 2 and a half days. I sourced the roof and bits myself, got it from BAS and seems to be really good quality.

cool i might look into that when i have some spare pennys :lol:

Alex wrote:looks great

since its got the whole tech II kit i would refit the spoiler and some 15" bbs, would look awsome like that i recon

Tedswagon wrote:
Duke137 wrote:
magpie wrote:no spoiler ftw
+1 Looks good as it is, looking forward to seeing it in the flesh
+2 Looks great and defo no spoiler.

Spoiler wont be fited again, since choosing not to have the spoiler i love the look and think the cabby does not suit a spoiler

Thanks for all the coments

Mon Apr 11, 2011 8:53 pm

Looks awesome mate!! How much did they roll the arches?

Watch the lower valance on the tech 2 kit. Had mine fitted and back from the bodyshop and scratched it on a speed bump and then kerb in a car park the other day.

Cant believe i did it and i wouldn't wish that feeling on anyone!

No spoiler ftw

Mon Apr 11, 2011 9:00 pm

kman82 wrote:Looks awesome mate!! How much did they roll the arches?

Watch the lower valance on the tech 2 kit. Had mine fitted and back from the bodyshop and scratched it on a speed bump and then kerb in a car park the other day. Cant believe i did it and i wouldn't wish that feeling on anyone!

No spoiler ftw

cheers mate

lower valance wont be hit by speed bumps, i tend to avoid them! and take caution when i do meet with them :lol:

Mon Apr 11, 2011 9:26 pm

MurphyE30 wrote:
Rav335uk wrote:Nearly there Murphy, just one or two finishing touch's to go.
any news on that?

Yes, all should arrive to me in 2 weeks, then i'll get started on yours first.