M52 b30 stroker rebuild back on the road
Moderator: martauto
-
E30BeemerLad
- Married to the E30 Zone
- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
yes mate
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
Affirmative matey
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
magpie
- Old Skooler
- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
Roger that
i got one in the box of tricks from Lee-P
i got one in the box of tricks from Lee-P
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
magpie
- Old Skooler
- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
all insured,Engine goes in tomorrow 
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
Updates required
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
e30topless
- E30 Zone Team Member
- Posts: 13598
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
nice one Mick
you will enjoy the result after driving a wheezy 4 pot for the last few years
you will enjoy the result after driving a wheezy 4 pot for the last few years
-
magpie
- Old Skooler
- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
i got rid of the last engine bay 4-pot parts today by grinding off the m42 coil pack brackets
Craigeeb's gonna be here around 9am so should be a doddle with the two of us .
Resistance is FUTILE
Craigeeb's gonna be here around 9am so should be a doddle with the two of us .
Resistance is FUTILE
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
Mick, have you fitted the ecu improvement's?
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
leeparkes
- Married to the E30 Zone
- Posts: 9538
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Dont forget to fire it up without the downpipes on Mick 
Yes that box of tricks did contain the 6 pot coding plug
Yes that box of tricks did contain the 6 pot coding plug
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
magpie
- Old Skooler
- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
i have x2 ecu's Dez,i'm going to run the one i got with the car first,then i'm going to add the other ecu package i got from you and compare Meerkats
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
.com
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
magpie
- Old Skooler
- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
it's alive still cant drive it though yet!!!
updated after i've bled it up etc
updated after i've bled it up etc
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Rav335uk
- E30 Zone Meets/Events Team
- Posts: 27985
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Weldone Mick
Btw, got the parcel today, cheers
Btw, got the parcel today, cheers
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
Duke137
- Married to the E30 Zone
- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
Nice one, be nice to see it at the POD, maybe you will run some quicker times....
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
Alex
- Married to the E30 Zone
- Posts: 22666
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
Weyyyymagpie wrote:it's alive still cant drive it though yet!!!
updated after i've bled it up etc
wheres the video...........
-
rancido64
- E30 Zone Regular
- Posts: 407
- Joined: Tue Sep 15, 2009 11:00 pm
- Location: Bournemouth
Same question as AlexAlex wrote:Weyyyymagpie wrote:it's alive still cant drive it though yet!!!
updated after i've bled it up etc
wheres the video...........
Congrats on getting her running dude, i'm sure it'll be worth all the time, effort, and swearing
-
RM2186
- E30 Zone Addict
- Posts: 4511
- Joined: Sun Sep 18, 2005 11:00 pm
- Location: Washington, Tyne & Wear
Well done Mick, looking forward to seeing the old gal again,
1987 Tech1 325i Sport
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
E30BeemerLad
- Married to the E30 Zone
- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
Nice work fellas
So when's it ready for the road then?
So when's it ready for the road then?
-
craigieeb
- E30 Zone Addict
- Posts: 4988
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: In my man cave modifying... something
It lives???
Jeeeesus Christ
My feet are still shaking due to the fact there was no exhaust on it for the say..15mins it was running
Couple of little problems for people to sort out
steering linkage vs manifold was a no go the manifold needs altering,
but we were under the impression they had already been done
All in all...
quite a productive day
Jeeeesus Christ
My feet are still shaking due to the fact there was no exhaust on it for the say..15mins it was running
Couple of little problems for people to sort out
steering linkage vs manifold was a no go the manifold needs altering,
but we were under the impression they had already been done
All in all...
quite a productive day
M50 Turbo!!! 
I shall say no more
I shall say no more -
Alex
- Married to the E30 Zone
- Posts: 22666
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
Mass respect bruvas 
-
capri_rob
- Married to the E30 Zone
- Posts: 9681
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
on the road outside the house - bet the neighbours love it !
e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
craigieeb
- E30 Zone Addict
- Posts: 4988
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: In my man cave modifying... something
See the houses in the background...
When Mick started it for the first time,
there was a little old woman who went running in to her house
M50 Turbo!!! I shall say no more
I shall say no more -
Alex
- Married to the E30 Zone
- Posts: 22666
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
they do, they wait for mick to go inside and the neighbours weigh his trolley jack incapri_rob wrote:
on the road outside the house - bet the neighbours love it !
-
bigredbmw
- Zone Supporter
- Posts: 1197
- Joined: Tue Aug 05, 2008 11:00 pm
- Location: newcastle upon tyne , howdon
they would of been keepin an eye on the engine hoist the minute his back was turned they would have it away hahahaha
lookin gd m8
lookin gd m8
-
Alex
- Married to the E30 Zone
- Posts: 22666
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
So we need to organise a teesside park meet for April then
Think everyone has there chariots on the road now
Think everyone has there chariots on the road now
-
craigieeb
- E30 Zone Addict
- Posts: 4988
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: In my man cave modifying... something
Salt........... WoundAlex wrote:
Think everyone has there chariots on the road now
http://www.e30zone.net/modules.php?name ... sc&start=0
M50 Turbo!!! I shall say no more
I shall say no more -
bigredbmw
- Zone Supporter
- Posts: 1197
- Joined: Tue Aug 05, 2008 11:00 pm
- Location: newcastle upon tyne , howdon
Alex wrote:So we need to organise a teesside park meet for April then
Think everyone has there chariots on the road now
nope be another couple month til mine is done
-
Alex
- Married to the E30 Zone
- Posts: 22666
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
Buggerycraigieeb wrote:Salt........... WoundAlex wrote:
Think everyone has there chariots on the road now
http://www.e30zone.net/modules.php?name ... sc&start=0
Any luck with it yet then
bigredbmw wrote:Alex wrote:So we need to organise a teesside park meet for April then
Think everyone has there chariots on the road now
nope be another couple month til mine is done
What you doing to yours???
-
magpie
- Old Skooler
- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
started the day off with some technical. arse scratching,
and decided to lift the box over the slam panel.
[caught wor lass sneaky pic'ing ]
nearly there
more arse scratching and a fag break for those who've earned it
straight on the button,watch my daughter right at the end
[youtube][/youtube]
so far no fan kicked in and still not bled through the noise
manifolds need sorting out and the brakes are shit .
happy as fook though
Cheers Craig Your a Legend for helping me out m8
and decided to lift the box over the slam panel.
[caught wor lass sneaky pic'ing ]
nearly there
more arse scratching and a fag break for those who've earned it
straight on the button,watch my daughter right at the end
[youtube][/youtube]
so far no fan kicked in and still not bled through the noise
manifolds need sorting out and the brakes are shit .
happy as fook though
Cheers Craig Your a Legend for helping me out m8
Last edited by magpie on Wed Mar 23, 2011 9:01 pm, edited 1 time in total.
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
adit
- Married to the E30 Zone
- Posts: 13727
- Joined: Wed Jun 20, 2007 11:00 pm
- Location: portsmouth
good work Michael, nearly there. keep at it mate 
p.s. hope you weren't too busy to attend to a courier today
p.s. hope you weren't too busy to attend to a courier today
E30 Parts Galore!! 07901 888019
[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
-
MurphyE30
- E30 Zone Addict
- Posts: 2543
- Joined: Wed Dec 22, 2010 11:00 pm
- Location: North
nice work boys
-
monkey
- E30 Zone Camper
- Posts: 1222
- Joined: Sat Jan 15, 2005 11:00 pm
- Location: devon
Good going chap . wont be long now
-
E30BeemerLad
- Married to the E30 Zone
- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
I'm guessing that front exhaust manifold was probably alright with an E30 rack mate
-
magpie
- Old Skooler
- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
how much Does Dan charge for his bolt on manifolds and downpipes ?
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds