central locking
Moderator: martauto
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Search brianmoooore and red/black!
You need to remove the driver's side kick panel and radio speaker,then pull out the hank of loom going to the A pillar socket,cut the red/black wires and join together.The aim is to stop the red/black passing through the pillar connector.Solder/heat shrink your joins,the wire is a permenent live!
Note that cabbie's have three red/blacks,all need to be joined.
You need to remove the driver's side kick panel and radio speaker,then pull out the hank of loom going to the A pillar socket,cut the red/black wires and join together.The aim is to stop the red/black passing through the pillar connector.Solder/heat shrink your joins,the wire is a permenent live!
Note that cabbie's have three red/blacks,all need to be joined.
Youth is wasted on the young.
