Help time again, please Guys!
I ordered the 325i boot to go with my new TB. The parts dept at the $tealers were in their usual heplful mode, so I had to supply them with the part number. I went for the one for the same build month as my car.
This doesn't have the take-off on it for the Y-pipe in the top servo vacuum hose. If I run a straight hose to on the top servo take-off will it cause any problems??
They won't take back the boot as it was a special order.
TIA
Stuart.
M20 Throttle body inlet elbow boot
Moderator: martauto
-
StuBeeDoo
- Engaged to the E30 Zone
- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse
This is why I no longer drive an E30......
-
Templ8e30
- E30 Zone Addict
- Posts: 2801
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Ashton-under-Lyne, Lancashire
Hi Mate, I had the same problem a while ago. Neened a new boot ASAP as the old one had split but they only had the version without the take-off for the servo.
I replaced the plastic 'y' with a straight lenght of hose and have had no problems at all.
Cheers,
Iain T
I replaced the plastic 'y' with a straight lenght of hose and have had no problems at all.
Cheers,
Iain T
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
-
StuBeeDoo
- Engaged to the E30 Zone
- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse
Thanks Iain, that's just what I wanted to hear! 
:D
:DThis is why I no longer drive an E30......