e28 engine mounts

Moderator: martauto

shedrool83
Old Skooler
Old Skooler
Posts: 4395
Joined: Thu May 10, 2007 11:00 pm
Location: Dundee Scotland

Post Tue Dec 14, 2010 5:59 am

11 81 1128932
11 81 2225201

Does anyone hae theecp/gsf part numbers for these as i cant find them on their websites.

Also i have read you can use two of the hockey puck ones rather than one of each.

Is this true and is there any pro's for doing this?



Thanks
Image
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Tue Dec 14, 2010 9:25 am

I used the square shaped ones with my first conversion, they eventually split and the engine was slopping about. Took about 3 years to get this bad but still... not good when your spending £60 odd on them
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Tue Dec 14, 2010 11:42 am

I payed £42 for a pair of the hockey puck one's in ECP's but I can't find the part number anywhere sorry!
I didn't have a part number when I went in mind you, I just asked for specifically e28 m5 (535i) rubber mounts. I then checked the part numbers out at bmw and they matched.
Guy in bmw parts said to me they don't stock the square metal one anymore and automaticaly give 2 round ones prob down to the failure dan describes.
Hope this is of help - Ant
A 2 door e30 with 8 cylinders, what could be better winkeye :D
shedrool83
Old Skooler
Old Skooler
Posts: 4395
Joined: Thu May 10, 2007 11:00 pm
Location: Dundee Scotland

Post Tue Dec 14, 2010 7:00 pm

Ok i'll just go for 2 of the puck style ones


Thanks
Image
Duke137
Married to the E30 Zone
Married to the E30 Zone
Posts: 7207
Joined: Sat Aug 29, 2009 11:00 pm

Post Tue Dec 14, 2010 9:31 pm

http://www.eurocarparts.com/ecp/c/BMW_5 ... 8268b&ENGM

These are the puck type ones that e30-dk used I believe.... (Ant please confirm if you read this mate)

They are the ones I got aswell. Picture in this thread below:

http://www.e30zone.net/modules.php?name ... c&t=173537

HTH :thumb:
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Tue Dec 14, 2010 9:50 pm

Yes they are the ones I used mate, unfortunatly the price has been put up by the look of it as I payed like £4? for the pair!
One thing I would note is that when I bought them from ECP I took them to bmw parts dept and the oem part number matched (on the box there is an ECP part number+OEM part number)
A 2 door e30 with 8 cylinders, what could be better winkeye :D
Duke137
Married to the E30 Zone
Married to the E30 Zone
Posts: 7207
Joined: Sat Aug 29, 2009 11:00 pm

Post Tue Dec 14, 2010 10:10 pm

You did ok at £4 for the pair LOL
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Tue Dec 14, 2010 10:26 pm

LMAO.... Yeah I should be so lucky mate, No,, I ment forty something (£4?) LOL,
I think it was £42 but not sure
A 2 door e30 with 8 cylinders, what could be better winkeye :D
shedrool83
Old Skooler
Old Skooler
Posts: 4395
Joined: Thu May 10, 2007 11:00 pm
Location: Dundee Scotland

Post Tue Dec 14, 2010 10:30 pm

Thanks guys .The parts are coming together nicely.
Image
Duke137
Married to the E30 Zone
Married to the E30 Zone
Posts: 7207
Joined: Sat Aug 29, 2009 11:00 pm

Post Tue Dec 14, 2010 10:31 pm

That's better, can't go around worrying people like that :D

For anyone doing this conversion I rang up ECP and asked for discount because I am ordering a fair bit and guess what I did :cool:

You don't ask you don't get
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Tue Dec 14, 2010 10:36 pm

Yer LOL my bad :D
A 2 door e30 with 8 cylinders, what could be better winkeye :D
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Wed Dec 15, 2010 9:33 pm

I picked some of these mountings up today from ECP,price was £19.68 each inc VAT.
Image
shedrool83
Old Skooler
Old Skooler
Posts: 4395
Joined: Thu May 10, 2007 11:00 pm
Location: Dundee Scotland

Post Wed Dec 15, 2010 9:39 pm

Not bad

I'll give them a call and see what they quote me as the nearest ecp is 60miles away.
Image