BM BITZ, anyone deal with these breakers?

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

Post Reply
User avatar
Chucko
E30 Zone Newbie
E30 Zone Newbie
Posts: 23
Joined: Wed Feb 23, 2005 11:00 pm
Location: California...USA

Sat Oct 08, 2005 12:43 pm

Hello, It's been a while since I've posted here, but I need some help from the E30Zone. I am considering purchasing parts from this company, but I don't really know anything about them. Anyone here have any experience with them? Good or Bad?

Thanks
Chucko
smithy318i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5797
Joined: Thu Apr 28, 2005 11:00 pm
Location: Tyne & Wear

Sat Oct 08, 2005 1:01 pm

Cant say i have used them (Him/Her/it)

there is someone registered on the zone with the ID bm-bitz

It may be the same person.

http://www.e30zone.co.uk/modules.php?na ... ile&u=7711

What bits do you need?

And welcome :wave:
Image
User avatar
Chucko
E30 Zone Newbie
E30 Zone Newbie
Posts: 23
Joined: Wed Feb 23, 2005 11:00 pm
Location: California...USA

Sat Oct 08, 2005 1:15 pm

Thanks for the welcome smithy318i
I have posted here before, but not since the new layout...well not new anymore. This is a great site.

bm bitz is one of the companies found on www.partsgateway.co.uk
I found the link on this website.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49358
Joined: Mon Jan 10, 2005 11:00 pm

Sat Oct 08, 2005 2:05 pm

Long established company. OK as far as I know.
Like all specialist breakers they tend to be far more expensive than the general scrappy down the road, but are far more likely to have what you want.
User avatar
Chucko
E30 Zone Newbie
E30 Zone Newbie
Posts: 23
Joined: Wed Feb 23, 2005 11:00 pm
Location: California...USA

Sat Oct 08, 2005 2:20 pm

I don't live in the UK so it would be easier for me to deal with a speacialist.
Thanks :)
ajay31
E30 Zone Newbie
E30 Zone Newbie
Posts: 79
Joined: Mon Sep 26, 2005 11:00 pm
Location: essex

Sat Oct 08, 2005 3:15 pm

hi there,
I AM IN PITSEA AND BM BITZ IS BASED IN CANVEY ABOUT 5 MILES FROM ME.
THEY ARE QUITE BIG AROUND HERE AND ALSO DO SERVICING, BREAKING AND NEW PARTS.
THEY HAVE ALWAYS BEEN HELPFUL AND CERTAINLY KNOW THEIR STUFF!
THEY ARE QUITE EXPENSIVE, BUT YOU ONLY GET WHAT YOU PAY FOR.

I CAN CERTAINLY RECCOMEND THEM AS HAVE NEVER HAD A PROBLEM IN MANY DEALINGS.
REGARDS AJAY
E30Mark
E30 Zone Team Member
E30 Zone Team Member
Posts: 8107
Joined: Sun Jan 09, 2005 11:00 pm
Location: Wimborne, Dorset

Sun Oct 09, 2005 10:55 pm

I have used BM Bitz when i used to live in Essex, like ajay said, they are quite a good / bigish BM breaker. Tad pricey at times, but they have a good selection of parts.

Have you tried www.fabdirect.com ?? again pricey but good!

What bits you after Chucko?
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
User avatar
Chucko
E30 Zone Newbie
E30 Zone Newbie
Posts: 23
Joined: Wed Feb 23, 2005 11:00 pm
Location: California...USA

Mon Oct 10, 2005 6:22 am

Thanks for the link to fabdirect, I'll have to check them out as well. I'm looking for an Mtech 2 kit. They are very difficult to come by here in the states. We can get them from the stealers, but only for the convertible model and at a hefty price. You guys seem to have plenty of these kits in the UK, but the shipping charges are killer. Still, the Mtech 2 kit is the most appealing kit fir the E30....IMO :cool:
E30Mark
E30 Zone Team Member
E30 Zone Team Member
Posts: 8107
Joined: Sun Jan 09, 2005 11:00 pm
Location: Wimborne, Dorset

Mon Oct 10, 2005 7:50 am

If Fab have one it will be approx Ԛ£600 + shipping, assuming if they are willing to ship to the states....
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
Post Reply