E34 with parkinsons...
Moderator: martauto
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Anybody know where I can get some poly bushes for the upper TCA?
Apparently Powerflex dont do them?
I originally fitted 750i bushes from BMW at a cost of £60 odd, they have lasted two years and now its gone back to shakey shakey syndrome
Apparently Powerflex dont do them?
I originally fitted 750i bushes from BMW at a cost of £60 odd, they have lasted two years and now its gone back to shakey shakey syndrome
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
My local Euros does/ did stock them. Have you tried your local ?
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Yep, first call, powerflex dont list them apparently, I thought it was rather strange, but strange is the norm with ECP
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
Luckily my local Euros has a couple of clued up paedo types . Powerflex tca bushes ,Euros part number is 973110221, 5 sets in stock at Wembley 
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Thank you sir, will try them tomorrow 
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
Why doesn't that surprise me. They just tell lies at mine!

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
if not perhaps "flowflex" or "superflex" may list them.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Ordered, £35 
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
And now its worse.... 
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
What else could it be? Your council spec 50p wheels? 

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
More than likely and ive sold all my BBS, its now shaking like a b**tard! At 60-70 on the brakes it feels like im about to get ejected
Had to hammer 70 grams on to one today, that was static balance didnt have enough stick ons for a normal balance
Had to hammer 70 grams on to one today, that was static balance didnt have enough stick ons for a normal balance
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
I will stick a couple of strips in the post if it's needed dude.
You have got bob hope of knock on's on static sorting that out. Ally 1 maybe improve it a bit!
You have got bob hope of knock on's on static sorting that out. Ally 1 maybe improve it a bit!

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
I will drop in somewhere tomorrow morning "before I get on the motorway" 
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
Get them to balance them on ally 1 mate. Best chance of reducing the shake. It's dynamic but weights inside behind the spokes and on the edge. 

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
320ise
- E30 Zone Addict

- Posts: 2033
- Joined: Thu Nov 08, 2007 11:00 pm
i had this problem running e39 rims and in the end it was spigot rings tried about 3 different types and trimmed them and greased the hub up=no more shaking!!!
E34 ///M5 THE BEST BMW EVER BUILT?


-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
This has E39 fitment wheels with spigot rings, the main problem is the wheels are shite, about the same quality as burger kings, got them balanced properly and its a lot better.
Could do with better wheels really but its a daily car that gets taken down the worst roads in the country (or so it seems) so im not about to spend plenty on wheels that are likely to get damaged.
Had this happen in June after driving over a pair of pliers somebody had kindly left on the road.......

Went though the tyre, wheel, brake back plate and also damaged the disc.
Lukily they weld up ok

Could do with better wheels really but its a daily car that gets taken down the worst roads in the country (or so it seems) so im not about to spend plenty on wheels that are likely to get damaged.
Had this happen in June after driving over a pair of pliers somebody had kindly left on the road.......

Went though the tyre, wheel, brake back plate and also damaged the disc.
Lukily they weld up ok

-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
DanThe wrote: Lukily they weld up ok![]()
Probably the strongest part of the wheel now though...
E30 in need of wiring loom smoke since April '11...
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
It did balance up with less weight afterwards 
