ok guy's what do ineed for 24v?

[magpie]

my plan is to buy a turd e36 running and go from there.or is a 5 series better?
regards sumps.or will i need to change the sump/pickup etc.

i hope to use an m42 g/box and will an m20 lightened fly be any good? i also need to know about looms ecu's down to zauts,none vanos/vanos the lot.

[eko]

M52 mate,no question
Cooks thread should give you an idea of whats involved/needed.

[magpie]

so a 528i and 328i are the same yeah?

[eko]

so a 528i and 328i are the same yeah?

Best with a 328i

[leeparkes]

Or 728i

[Cook318IS]

528i isnt ideal becuase of the dual vanos on the engine (PITA to install when in an e30) and you need to use a 328i loom anyway.

buy an el cheapo e36 donor - my engine has been free with more in return

[E30BeemerLad]

My list of parts

1995 E36 328i M52 Engine - with EWS
328i exhaust manifold from above
E34 525 24v sump, oil pickup pipe & dipstick tube
E30 M3 electric fan - any E36 air con fan will do
E28 M5 rubber engine mounts - about £60 from BMW
Plug & play custom engine loom - DanThe
PLug & play custom electric fan loom - DanThe
Clio bosch servo - get from any plastic winged clio (E30 master cylinder bolts straight up
E30 318iS gearbox
E30 325 clutch & flywheel
E30 320 gear shift rods
Z3 1.9 gear shifter (quickshift) - optional - E30 one works fine
E30 325 propshaft
E30 3.9:1 LSD (it's a bit revvy on the motorway but gets off the line like stink)
E30 M3 scorpion stainless exhaust system - optional - E30 325 system is OK, but the M3 system is 50mm twin tube all the way though and helps a lot.
Custom made PAS pipes
E36 steering rack

[georges867]

If you use the e36 rack you shouldn't need custom pas pipes, well i didn't but im doing a M50

http://www.eurocarparts.com/ecp/c/BMW_5 ... 8268b&ENGM

Those are the mounts i used, cheaper than going to BMW.

Defo agree with Beemerlad on the exhaust, im using a E30 325 system and i think its going to restrict it quite abit (my thought is it will get me going) if you can try pick up a stainless system from the start.

Has anyone achieved good power with the standard system?

Dont forget you need a starter motor off a facelift E30 M20 engine if you are using a M20 flywheel and clutch.

[Rav335uk]

You need an engine that wont crap it self in a few weeks.
Better off buying a complete as many have done Magpie.
24v , but at least your going 6pot

[mattrs]

The 2.8 lump had nikasil linings did it not?

Get a 2.7 or 2.8 m20 lump in it!

[toby]

My list of parts

1995 E36 328i M52 Engine - with EWS
328i exhaust manifold from above
E34 525 24v sump, oil pickup pipe & dipstick tube
E30 M3 electric fan - any E36 air con fan will do
E28 M5 rubber engine mounts - about £60 from BMW
Plug & play custom engine loom - DanThe
PLug & play custom electric fan loom - DanThe
Clio bosch servo - get from any plastic winged clio (E30 master cylinder bolts straight up
E30 318iS gearbox
E30 325 clutch & flywheel
E30 320 gear shift rods
Z3 1.9 gear shifter (quickshift) - optional - E30 one works fine
E30 320 propshaft
E30 3.9:1 LSD (it's a bit revvy on the motorway but gets off the line like stink)
E30 M3 scorpion stainless exhaust system - optional - E30 325 system is OK, but the M3 system is 50mm twin tube all the way though and helps a lot.
Custom made PAS pipes
E36 steering rack

That's a nice concise list. Have you posted it in the M50 development thread as a list like that? If not it would be good to have it there.

[Alpina99]

Hey Mick,
Seen the light at last ??
Looking forward to your updates,

[magpie]

gotta find a good engined e36 first..

then frag it


i just sold a bloody b20 gear selector

[Duke137]

My list of parts

1995 E36 328i M52 Engine - with EWS
328i exhaust manifold from above
E34 525 24v sump, oil pickup pipe & dipstick tube
E30 M3 electric fan - any E36 air con fan will do
E28 M5 rubber engine mounts - about £60 from BMW
Plug & play custom engine loom - DanThe
PLug & play custom electric fan loom - DanThe
Clio bosch servo - get from any plastic winged clio (E30 master cylinder bolts straight up
E30 318iS gearbox
E30 325 clutch & flywheel
E30 320 gear shift rods
Z3 1.9 gear shifter (quickshift) - optional - E30 one works fine
E30 320 propshaft
E30 3.9:1 LSD (it's a bit revvy on the motorway but gets off the line like stink)
E30 M3 scorpion stainless exhaust system - optional - E30 325 system is OK, but the M3 system is 50mm twin tube all the way though and helps a lot.
Custom made PAS pipes
E36 steering rack

That's a nice concise list. Have you posted it in the M50 development thread as a list like that? If not it would be good to have it there.

+ 1

thats a good list... Realised I need one or 2 extras that I "forgot about"

[Rod1-BMW]

I should be undertaking this soon also. (when funds allow of course) that shopping list is gonna be useful. thanks

Oh and duke, where in derby are you. you're not far from me

[doc323]

gotta find a good engined e36 first..

then frag it


i just sold a bloody b20 gear selector

Thats what i had it for!!

[Dave_M3]

My list of parts

1995 E36 328i M52 Engine - with EWS
328i exhaust manifold from above
E34 525 24v sump, oil pickup pipe & dipstick tube
E30 M3 electric fan - any E36 air con fan will do
E28 M5 rubber engine mounts - about £60 from BMW
Plug & play custom engine loom - DanThe
PLug & play custom electric fan loom - DanThe
Clio bosch servo - get from any plastic winged clio (E30 master cylinder bolts straight up
E30 318iS gearbox
E30 325 clutch & flywheel
E30 320 gear shift rods
Z3 1.9 gear shifter (quickshift) - optional - E30 one works fine
E30 320 propshaft
E30 3.9:1 LSD (it's a bit revvy on the motorway but gets off the line like stink)
E30 M3 scorpion stainless exhaust system - optional - E30 325 system is OK, but the M3 system is 50mm twin tube all the way though and helps a lot.
Custom made PAS pipes
E36 steering rack

Just a few things to add there

Custom splined steering shaft - DanThe
E34 Steering U-Js (x2) Any E34 at a scrapy but you need two of them
Above not critical but makes the manifold alittle easier.


E30 brown temp sensor (to give the E30 clocks a reading)
E36 328 rad plus another drives side E30 rad mount (E36 rad wider)
E36 318 air-con fan temp switch

M50 Sump and manifold gaskets as your taking them off and changing them and if your fitting an M50 inlet.

E30 spigot bearing if your using an iS gearbox.

[Dave_M3]

My list of parts

1995 E36 328i M52 Engine - with EWS
328i exhaust manifold from above
E34 525 24v sump, oil pickup pipe & dipstick tube
E30 M3 electric fan - any E36 air con fan will do
E28 M5 rubber engine mounts - about £60 from BMW
Plug & play custom engine loom - DanThe
PLug & play custom electric fan loom - DanThe
Clio bosch servo - get from any plastic winged clio (E30 master cylinder bolts straight up
E30 318iS gearbox
E30 325 clutch & flywheel
E30 320 gear shift rods
Z3 1.9 gear shifter (quickshift) - optional - E30 one works fine
E30 320 propshaft
E30 3.9:1 LSD (it's a bit revvy on the motorway but gets off the line like stink)
E30 M3 scorpion stainless exhaust system - optional - E30 325 system is OK, but the M3 system is 50mm twin tube all the way though and helps a lot.
Custom made PAS pipes
E36 steering rack

Just a few things to add there

Custom splined steering shaft - DanThe
E34 Steering U-Js (x2) Any E34 at a scrapy but you need two of them
Above not critical but makes the manifold alittle easier.


E30 brown temp sensor (to give the E30 clocks a reading)
E36 328 rad plus another drives side E30 rad mount (E36 rad wider)
E36 318 air-con fan temp switch

M50 Sump and manifold gaskets as your taking them off and changing them and if your fitting an M50 inlet.

E30 spigot bearing if your using an iS gearbox.

[Alex]

You know it makes sence mick

[Rav335uk]

I think he's been Dinking toooo much.

[DanThe]

Indeedy, get that M42 shitter in the bin and take the righteous path

[Alex]

I think he's been Dinking toooo much.

Mick Knows 24v Is the way forward

[Rav335uk]

I think he's been Dinking toooo much.

Mick Knows 24v Is the way forward

From a 4 pot, 6 pot is the way forward

[magpie]

seems i now have it all apart from some rubber mounts

[Dave_M3]

So the mighty M42 finally coming out then Mick?

I'd be the same anyway if it wasn't for for our retarded tax system that makes the 2.8 600 euro more a year than an M42.

So it's a case of build a 2.8 baiting 318iS. Already almost as quick as a good 328 so can't take much more for an E30 328

[magpie]

I think he's been Dinking toooo much.

you said ? ha ha 24v all the way