'Shit stain' left over after stripping out sound deadening.

Post Mon Sep 27, 2010 6:39 pm

Bit of a stupid one this, but does anyone know of an easy way to get rid of the brown 'aftermath' that is left in my car after stripping out the sound deadening? It looks gash but I'm hoping it might come off with some white spirit or summint... or am i gonna have to get the sander out?

Post Mon Sep 27, 2010 6:41 pm

If its anything like the underbonnet foam,whites spirits did it for me.

Is it bare metal? If it is ,maybe a bit of nitromous? Will be a bit extreme though if its coating in paint... Won't have any left if you put that on.

Post Mon Sep 27, 2010 7:26 pm

Bit of petrol will do the trick. Or anything like a carb cleaner aerosol.

Post Mon Sep 27, 2010 7:47 pm

Cheers guys - I'll start with white spirit and then get more hardcore if that doesn't work!

Post Mon Sep 27, 2010 9:03 pm

Here in Sweden we have something called "Label off" and im sure something similar is available over there. You just spray it on thick, leave it for 5 minutes and wipe it off, smells of lemons and is totally hazard free to get on your hands or anything. It dissolves the glue residue and leaves clean paint, i think i spent 2 hours getting the mats out with a heat gun then 30 minutes tops with the aerosol for all of my interior in my 325i -90, and I know of dozens with the same experiance.

Post Tue Sep 28, 2010 5:52 pm

I'll have a look in the 'Innovations' catalogue for some of that then! Cheers.

Post Wed Sep 29, 2010 8:33 pm

i have been tearing my hair out trying to get this stuff off. what ever you find jim let me know mate

Post Wed Sep 29, 2010 8:48 pm

Guys..... Fuel petrol gas..... Whatever you call it, it's the answer !

Post Wed Sep 29, 2010 8:48 pm

Guys..... Fuel petrol gas..... Whatever you call it, it's the answer !

Post Wed Sep 29, 2010 9:03 pm

ok well ill have a good go with the fuel idea..... and hopefully that will be the end of annoying black marks.

Post Thu Sep 30, 2010 12:22 am

I just used white spirit and some panel wipe on a second lot I did, came out perfect.

That was in the summer. Went for a more extreme strip over winter last year when it was freezing. Just chipped off and barely left a stain.

Post Thu Sep 30, 2010 10:08 am

One of the best solutions I have seen for this is to use dry ice (CO2). Place it on top of the insulation for a short while, let it freeze it and it should chip right off. The other solution I have seen is to use liquid nitrogen, but that's a bit extreme!

But of course, that doesn't help you get rid of the current aftermath!

Post Thu Sep 30, 2010 4:01 pm

I'll try the petrol idea and just make sure that I'm not smoking a fag at the time!!

Post Thu Sep 30, 2010 9:04 pm

I seriously cant imagine there NOT being the equivilent to our "Label off" in Britain. Its stuff you use to pretty much get sticker-glue and stuff off, we have several different brands with it here.

You just spray it on, wait 5 minutes and wipe off EVERYTHING, messing with white spirit and petrol must take hours and hours.

http://www.homecrafts.co.uk/products-La ... _LO200.htm for example

Post Sat Oct 02, 2010 4:44 pm

well i tried the petrol idea and walla done. got it all off and i felt high as a kite doing it. perfect.
could do with a slight drop of white spirit to clean the petrol residue off though.

timmy we never get useful things like that mate. everything is a struggle over here

Post Sat Oct 02, 2010 4:52 pm

Driftben wrote: timmy we never get useful things like that mate. everything is a struggle over here

Yes we do

http://cgi.ebay.co.uk/Sticky-Stuff-Remo ... 483a3cb203

Post Sat Oct 02, 2010 5:06 pm

£4.50 is too expensive and i bet thats not from the UK

Post Sun Oct 03, 2010 8:30 am

Parafin is a good (and cheap!) alternative too!

Post Sun Oct 03, 2010 11:06 am

It's a good alternative but I don't like the smell. Hehe.
I'll take some before and after photos abit later when I'll get a bit of time on the car. Using petrol that is with White spirit as a final finish.

Post Sun Oct 03, 2010 5:51 pm

i managed to remember to get some pics before i finished.
i basicly brushed petrol on and wiped off with a bit of effort.
then wiped clean with white sprit..... job done.
bad point is that you now can see all your rust spots hehe

Post Sun Oct 03, 2010 10:06 pm

Driftben wrote: bad point is that you now can see all your rust spots hehe

i found that useful, had far more than i thought

Post Wed Oct 06, 2010 10:18 pm

DHFiS wrote:
Driftben wrote: timmy we never get useful things like that mate. everything is a struggle over here
Yes we do

http://cgi.ebay.co.uk/Sticky-Stuff-Remo ... 483a3cb203

I love it when unleaded becomes the cheapest way......

This happens rarely !