
my 318is - rebuilt, resprayed + slammed!
Moderator: martauto
-
Clarkyboy
- E30 Zone Newbie

- Posts: 75
- Joined: Sun Aug 26, 2007 11:00 pm
so i have owned the car for 5 years now, it has sat in my driveway since feb 2007, and in the last 2 months i have done everything from rebuilding the engine, adding a ported and polished head then i stripped it right out, gave it a full respray in awesome white and replaced the suspension, brakes added some bucket seats + harnesses, finally its almost ready to get the m3 touring car decals applied!


-
aj_mckay
- E30 Zone Squatter

- Posts: 1782
- Joined: Sun Nov 11, 2007 11:00 pm
- Location: Winchester
MORE PICS! Looks good from the front 
-
Clarkyboy
- E30 Zone Newbie

- Posts: 75
- Joined: Sun Aug 26, 2007 11:00 pm
you can see them all from the below link, the wheels are just scabby old ones i had in the shed, it will be sitting on 15x7 bbs on the front and 15x8 compomotive on the rear!
http://www.flickr.com/photos/42400855@N02/page2/
http://www.flickr.com/photos/42400855@N02/page2/
-
bedumon
- E30 Zone Regular

- Posts: 387
- Joined: Mon Sep 07, 2009 11:00 pm
- Location: Birmingham
Looks like a lot of works gone into that. Very nice.
P.S that cat looks very similar to mine
P.S that cat looks very similar to mine

-
pac1982
- Engaged to the E30 Zone

- Posts: 5330
- Joined: Fri Mar 07, 2008 11:00 pm
- Location: isle of wight
Looks really nice dude is the white a BMW colour?? looks a lot nicer than most the BMW whites i've seen but that could just be down to the pictures.
If i were you i would leave it without the graphics looks a lot nicer how it is needs wide arches and a bigger engine to pull of touring car decals, just my opinion each to there own
If i were you i would leave it without the graphics looks a lot nicer how it is needs wide arches and a bigger engine to pull of touring car decals, just my opinion each to there own

1991 BMW E30 318i Neon Design Convertible (Sold)
1990 BMW E30 325i Touring (Sold)
1990 BMW E30 318IS (Sold)
1990 BMW E30 316i (RIP)
-
aj_mckay
- E30 Zone Squatter

- Posts: 1782
- Joined: Sun Nov 11, 2007 11:00 pm
- Location: Winchester
I have to disagree with you there. Did you see JuniorGT's thread on the 318is track car he built? Pure awesomeness. Pics of the DTM decals at the bottom of pg.7...pac1982 wrote:If i were you i would leave it without the graphics looks a lot nicer how it is needs wide arches and a bigger engine to pull of touring car decals, just my opinion each to there own
http://www.e30zone.net/modules.php?name ... &start=150
-
pac1982
- Engaged to the E30 Zone

- Posts: 5330
- Joined: Fri Mar 07, 2008 11:00 pm
- Location: isle of wight
If he's gonna go the full hog and fit a proper roll cage, big brakes, race dash and all the other bits and bobs which make a true track slag, then yes you can pull it off, you have to go all the way to pull of race graphics else it just looks a bit cheap.aj_mckay wrote:I have to disagree with you there. Did you see JuniorGT's thread on the 318is track car he built? Pure awesomeness. Pics of the DTM decals at the bottom of pg.7...pac1982 wrote:If i were you i would leave it without the graphics looks a lot nicer how it is needs wide arches and a bigger engine to pull of touring car decals, just my opinion each to there own
http://www.e30zone.net/modules.php?name ... &start=150
I know graphics are easy enough to remove but in my eyes a standard but minty fresh 318is is much more desirable than a sheep in wolfs clothing

1991 BMW E30 318i Neon Design Convertible (Sold)
1990 BMW E30 325i Touring (Sold)
1990 BMW E30 318IS (Sold)
1990 BMW E30 316i (RIP)
-
Clarkyboy
- E30 Zone Newbie

- Posts: 75
- Joined: Sun Aug 26, 2007 11:00 pm
Im afraid i must confess its not a BMW white.....i know i know its not a bmw colour!!
the colour is what is called straight white, no added blues/greys/creams etc, this is as white as you can get. its UPOL 0001 - brilliant white. which is also far cheaper than a mixed colour and as simple as you can get to match if/when i damage the car!!
the engine has had a bit of fettling, ported and polished head, chip, 57mm throttle body(not yet fitted) full stainless, decent panel filter etc. suspension has been done also along with drilled groved and vented brakes all round!
and as for the decals, the reason behind them is that i will be racing the car next year in the scottish sprint and hillclimb championship and i have allways loved them!
the interior will remain standard due to the class i will be in (road going up to 2000cc) which specifies that the interior trim must reamain standard apart from the front seats, which is a real PITA because i have a lightened dash (all of the internals removed) and the intrument panels have been replaced with carbon fiber - but i cant use it!!
also i am allways on the lookout for a fibreglass bootlid + bonnet if anyone knows of some going cheap, i will consider damaged parts also.
the colour is what is called straight white, no added blues/greys/creams etc, this is as white as you can get. its UPOL 0001 - brilliant white. which is also far cheaper than a mixed colour and as simple as you can get to match if/when i damage the car!!
the engine has had a bit of fettling, ported and polished head, chip, 57mm throttle body(not yet fitted) full stainless, decent panel filter etc. suspension has been done also along with drilled groved and vented brakes all round!
and as for the decals, the reason behind them is that i will be racing the car next year in the scottish sprint and hillclimb championship and i have allways loved them!
the interior will remain standard due to the class i will be in (road going up to 2000cc) which specifies that the interior trim must reamain standard apart from the front seats, which is a real PITA because i have a lightened dash (all of the internals removed) and the intrument panels have been replaced with carbon fiber - but i cant use it!!
also i am allways on the lookout for a fibreglass bootlid + bonnet if anyone knows of some going cheap, i will consider damaged parts also.
