is there a firm that will re paint a 325i engine? or someone who can give me a quote? getting my 325i in a month or so, and building up the list and costs expected..
wakas
someone to paint an engine?
Moderator: martauto
-
octanejunkie
- E30 Zone Regular

- Posts: 479
- Joined: Fri Jul 02, 2010 11:00 pm
- Location: Somerset England
Painting an engine properly requires removing the engine. Its a fair bit of time and hassle to do that just for a lick of paint, and will cost you a pretty penny in labour, and gaskets and stuff.
-
wakasmasood
- E30 Zone Newbie

- Posts: 30
- Joined: Mon Jun 21, 2010 11:00 pm
hmm yh your right, but it does look nice after though lol
-
Duke137
- Married to the E30 Zone

- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
Just give it a proper clean up then take your inlet manifold and rocker cover off and get someone to paint them up. Replace any worn hoses and your car will look a hell of a lot better without too much trouble or cost....wakasmasood wrote:hmm yh your right, but it does look nice after though .
If you are thinking about going to town on it you need the engine out and then you'll want to do the exhaust minfold then it will be something else and so on and so on, before you know it your living the the E30 dream of spending all your hard earned cash and valuable time on the car where you know deep down you won't ever get your money back
Oh and if you have a missus she'll constantly tell you that you love the car more than her and the only other time you'll have left you will be patching up your relationship.
My advice, rocker cover and clean
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
TouringTash
- E30 Zone Team Member

- Posts: 3803
- Joined: Mon Jun 28, 2010 11:00 pm
- Location: Kent
I would ditch the other half, the savings in treats, handling, fuel, more time with theDuke137 wrote:Oh and if you have a missus she'll constantly tell you that you love the car more than her and the only other time you'll have left you will be patching up your relationship.wakasmasood wrote:hmm yh your right, but it does look nice after though .
My advice, rocker cover and clean
one you truly love etc etc
Why keep a cow when milks only 50p a pint.
318i Touring
-
Duke137
- Married to the E30 Zone

- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
heheheTouringTash wrote:I would ditch the other half, the savings in treats, handling, fuel, more time with theDuke137 wrote:Oh and if you have a missus she'll constantly tell you that you love the car more than her and the only other time you'll have left you will be patching up your relationship.wakasmasood wrote:hmm yh your right, but it does look nice after though .
My advice, rocker cover and clean
one you truly love etc etc
Why keep a cow when milks only 50p a pint.
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
snakebrain
- E30 Zone Addict

- Posts: 3683
- Joined: Tue Aug 11, 2009 11:00 pm
Because sometimes you just can't be bothered going out in the middle of the night for a pint of milk?? 
-
TouringTash
- E30 Zone Team Member

- Posts: 3803
- Joined: Mon Jun 28, 2010 11:00 pm
- Location: Kent
what about a delivery service? 
318i Touring
-
hennabm
- Old Skooler

- Posts: 1392
- Joined: Sun Jul 08, 2007 11:00 pm
- Location: Edinburgh
Even on a 325 there are not too many obstacles to remove so you can paint the block yourself. Frosts do a proper engine paint with high build colour.
The only drawback is that the instructions for that paint say not to start the engine for 3 days. Mind you that 3 days is quicker than engine out, paint and rebuild.
The core plugs can then be painted in wheel steel or silver and the whole of the engine will look better.
I would also agree a good clean or paint of the mainifold and rocker cover will boost the look straight away for little outlay.
If taking the inlet manifold back to original, then vapour blasting will return it to factory finish.
If painting the rocker and manifold then some use HT paint and others normal paint. I used HT paint on my 320 rocker cover and inlet manifold and nearly 4 years on it is still good.
The only drawback is that the instructions for that paint say not to start the engine for 3 days. Mind you that 3 days is quicker than engine out, paint and rebuild.
The core plugs can then be painted in wheel steel or silver and the whole of the engine will look better.
I would also agree a good clean or paint of the mainifold and rocker cover will boost the look straight away for little outlay.
If taking the inlet manifold back to original, then vapour blasting will return it to factory finish.
If painting the rocker and manifold then some use HT paint and others normal paint. I used HT paint on my 320 rocker cover and inlet manifold and nearly 4 years on it is still good.
'82 323i henna
'90 320iSE sterling silver No more!
'10 116d Sport Red - MkI
'12 1.4 Punto Easy Exotica Red
'11 X3 3.0d SE
'89 240 DL Estate
'90 320iSE sterling silver No more!
'10 116d Sport Red - MkI
'12 1.4 Punto Easy Exotica Red
'11 X3 3.0d SE
'89 240 DL Estate
