bmw wheels?

Post Sun Sep 25, 2005 5:24 pm

can any one tell me what the offset is and that other thing lol 4 X 100 i'm sure someone knows what i mean even if i dont lol

Post Sun Sep 25, 2005 5:26 pm

have a look here m8.
this should answer your questions about what the terms mean.

http://www.needforspeed.co.uk/htmlpages/TechWheels.htm

an e30 is pcd 4 x 100 and offset of et 15 to et25

Post Sun Sep 25, 2005 5:26 pm

Only ones I know for sure are 15" BBS which are ET24 and 16" Hartge's which are ET13.
HTH
Stuart.

Post Sun Sep 25, 2005 5:30 pm

Chaos wrote:have a look here m8.
this should answer your questions

http://www.needforspeed.co.uk/htmlpages/TechWheels.htm

Great link Chaos!!

Post Sun Sep 25, 2005 5:31 pm

cheers gizzers

Post Sun Sep 25, 2005 6:03 pm

3 Series E30 86 to 91 PDC 4x100 OFF SET 15 to 20 B72.6

would fitting a bigger off set matter say 30 or 35 ????

Post Sun Sep 25, 2005 6:06 pm

steedymorgan wrote:3 Series E30 86 to 91 PDC 4x100 OFF SET 15 to 20 B72.6

would fitting a bigger off set matter say 30 or 35 ????

right where to start.

the wheels have to be pcd 4 x 100 - otherwise the studs wont fit.

as for the offset, well u cud fit 30 or 35mm to an e30 but you would most likely need to use spacers

Post Sun Sep 25, 2005 7:14 pm

cool cheers mate

Post Sun Sep 25, 2005 7:19 pm

stuart hartge 16's are et25 mate

alpenis are et28 if that helps anyone!

Post Sun Sep 25, 2005 7:23 pm

what it is i have a set of tsw's that are 4x100 offset 35, i just dont want to swap my tyres over just to find out they dont fit lol

Post Sun Sep 25, 2005 7:51 pm

I bought a 318i for spares which had 16" ET30 Azevs on. The front wheels were rubbing slightly against the struts.

Post Sun Sep 25, 2005 7:56 pm

Simon13 wrote:stuart hartge 16's are et25 mate

I stand corrected!

:D

steedymorgan wrote:i have a set of tsw's that are 4x100 offset 35

'That case, you'll need 10mm spacers and probably longer studs

Post Sun Sep 25, 2005 8:02 pm

sorted cheers fellows