Machine polishers
Moderator: martauto
-
sideshowbob
- E30 Zone Newbie

- Posts: 249
- Joined: Thu Jan 10, 2008 11:00 pm
Sorry I am being a bit lazy and can't be bothered searching the site,but can any one recommend a good quality compound to use in my new dual action polisher.
I have been using Autoglym products such as Resin Polish followed by High Definition wax. Results have been good but swirl marks from past are affecting the quality of my work. I want to machine polish car hopefully removing swirls and scratches, and then buff it up and then apply High Definition wax.
Any ideas ?
I have been using Autoglym products such as Resin Polish followed by High Definition wax. Results have been good but swirl marks from past are affecting the quality of my work. I want to machine polish car hopefully removing swirls and scratches, and then buff it up and then apply High Definition wax.
Any ideas ?
-
PG325
- E30 Zone Camper

- Posts: 1194
- Joined: Sat Jun 06, 2009 11:00 pm
Try Menzerna, I bought a £25 sample kit of 4 x 250ml different cutting/polishing compounds and used it on a red car, took out every swirl/RDS/hologram.
My photos are in the photo section.
Try Elite car care or clean your car.
My photos are in the photo section.
Try Elite car care or clean your car.
-
Adil786
- E30 Zone Regular

- Posts: 256
- Joined: Fri May 08, 2009 11:00 pm
- Location: Bristol/Slough
Poorboys SSR 2.5 or 3.0 will remove all marks
Elite care care do this I think. Recommend using claybar on the car first if you haven't done so already!
-
SGP
- E30 Zone Regular

- Posts: 502
- Joined: Thu Aug 31, 2006 11:00 pm
Meguiars 'Speed Glaze' with the Meguiars yellow foam mop will remove all swirls and holograms. It's not cheap- but in my experience, (6yrs valeting, and counting..) it's failsafe, especially with a da. Finish with your fave carnauba rich wax .(by hand !)
If it ain't broke..
Fix it till it is
Fix it till it is
-
SGP
- E30 Zone Regular

- Posts: 502
- Joined: Thu Aug 31, 2006 11:00 pm
Btw, keep the speed down, especially over raised areas 
If it ain't broke..
Fix it till it is
Fix it till it is
-
lowey
- E30 Zone Regular

- Posts: 316
- Joined: Sat Aug 12, 2006 11:00 pm
- Location: Telford, Shropshire.
+1 on the megs Speed Glaze - smashing stuff. The swirls WILL disappear. I then follow with Megs "hand polish" and then their NXT wax.SGP wrote:Meguiars 'Speed Glaze' with the Meguiars yellow foam mop will remove all swirls and holograms. It's not cheap- but in my experience, (6yrs valeting, and counting..) it's failsafe, especially with a the. Finish with your fave carnauba rich wax .(by hand !)
1989 325i SPORT Brilliantrot
-
silversideofthemoon
- E30 Zone Regular

- Posts: 498
- Joined: Sat May 29, 2010 11:00 pm
- Location: near a river in the north west
i used g3 on mine came with few apps after most of day on my previous red touring it was like a mirror to look in and then applied a meguiars spray wax as this was all i haD AT THE TIME looked great
formally touringandy.............driving e30 320i touring and e39 535i
-
SGP
- E30 Zone Regular

- Posts: 502
- Joined: Thu Aug 31, 2006 11:00 pm
especially with a da
Their High Tech Yellow wax is nice too 
If it ain't broke..
Fix it till it is
Fix it till it is
-
SGP
- E30 Zone Regular

- Posts: 502
- Joined: Thu Aug 31, 2006 11:00 pm
da
If it ain't broke..
Fix it till it is
Fix it till it is
-
SGP
- E30 Zone Regular

- Posts: 502
- Joined: Thu Aug 31, 2006 11:00 pm
Ah, text speak censorship ! Works very well with the D.A. too.
If it ain't broke..
Fix it till it is
Fix it till it is
-
TouringTash
- E30 Zone Team Member

- Posts: 3803
- Joined: Mon Jun 28, 2010 11:00 pm
- Location: Kent
Does anyone sell pure bees wax?
my neighbour (old school pannel beater and sprayer of over 50 years) gave me a jar once and said it was pure bees wax. Lasted for ages and if applied over 3 times, twice applied with a damp cloth gave a finish like laquer.
my neighbour (old school pannel beater and sprayer of over 50 years) gave me a jar once and said it was pure bees wax. Lasted for ages and if applied over 3 times, twice applied with a damp cloth gave a finish like laquer.
318i Touring
-
SGP
- E30 Zone Regular

- Posts: 502
- Joined: Thu Aug 31, 2006 11:00 pm
Pure beeswax is a favourite for polishing furniture. I'd check out the nearest furniture store.
If it ain't broke..
Fix it till it is
Fix it till it is
-
TouringTash
- E30 Zone Team Member

- Posts: 3803
- Joined: Mon Jun 28, 2010 11:00 pm
- Location: Kent
cheers fella
318i Touring
-
silversideofthemoon
- E30 Zone Regular

- Posts: 498
- Joined: Sat May 29, 2010 11:00 pm
- Location: near a river in the north west
b & q do pure bees wax in large tin about 8 pound a think tash
formally touringandy.............driving e30 320i touring and e39 535i
-
octanejunkie
- E30 Zone Regular

- Posts: 479
- Joined: Fri Jul 02, 2010 11:00 pm
- Location: Somerset England
I've just bought a new machine polisher with some compounding heads.
Used with Farecla G3, the results have been superb. I've just done two cars with heavily oxidised paint (black Alfa GTV, and a red Astra), and the results were amazing.
The key to avoiding swirls is to use plenty of water. Both cars were swirl free.
After using a cutting compound, its important to seal the finish, as G3 and similar products leave the paint naked with no protection.
Use a fine polish like Mer afterwards, then go over with someting like caranuba wax.
its hard work, and you should set aside a good half day to do it, but the results will speak for themselves.
Used with Farecla G3, the results have been superb. I've just done two cars with heavily oxidised paint (black Alfa GTV, and a red Astra), and the results were amazing.
The key to avoiding swirls is to use plenty of water. Both cars were swirl free.
After using a cutting compound, its important to seal the finish, as G3 and similar products leave the paint naked with no protection.
Use a fine polish like Mer afterwards, then go over with someting like caranuba wax.
its hard work, and you should set aside a good half day to do it, but the results will speak for themselves.
