Eddie's summer refresh (Finis)

Show off your pride and joy here

Moderator: martauto

Eddie25
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Fri Dec 29, 2006 11:00 pm
Location: Gloucestershire

Post Mon Jul 12, 2010 1:42 pm

Thought I'd post some quick pics of the work that is currently going on with the turd.

As is often the case with these cars what started off as an MOT (that didn't go too well) and a few new parts has turned into a big and depressingly expensive project:

Looking a bit sorry for itself:

Image

Uploaded with ImageShack.us

A scruffy head:

Image

Uploaded with ImageShack.us

The block and 1/2 of the BTB rightness:

Image

Uploaded with ImageShack.us

Really not bad for 105,000 miles :cool:

Image

Uploaded with ImageShack.us

This could take a little while :( But the only thing not being renewed is the head casing itself :D

Image

Uploaded with ImageShack.us

A very clean 3.91 LSD :cool: (minus the few fitting scars which will be addressed).

Image

Uploaded with ImageShack.us

The obligitory floor welding (to be finished off)

Image

Uploaded with ImageShack.us

More to come.... :D
Last edited by Eddie25 on Mon Sep 06, 2010 12:33 am, edited 2 times in total.
Eddie25
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Fri Dec 29, 2006 11:00 pm
Location: Gloucestershire

Post Sat Jul 17, 2010 2:22 pm

Beautiful job by the machine shop on the head:

Image

Uploaded with ImageShack.us


Image

Uploaded with ImageShack.us

Just about new everything :cool:

Image

Uploaded with ImageShack.us

Image

Uploaded with ImageShack.us

Image

Uploaded with ImageShack.us

mmmmmm BTB winkeye

Image

Uploaded with ImageShack.us

Image

Uploaded with ImageShack.us

As the engine is also getting a tiny bity of a spicier cam (264 CAT Cam) to go with the skim, valve regrind and slight seat reangle It seemed only right to add some Alpina rightness :cool:

Image

Uploaded with ImageShack.us

Image

Uploaded with ImageShack.us

Ground clearance was a concern with only 15" wheels but it really isnt much lower than the current IS item:

Image

Uploaded with ImageShack.us

Can't wait to get the turd running again :D
CHR1S1990
E30 Zone Camper
E30 Zone Camper
Posts: 1121
Joined: Fri Mar 14, 2008 11:00 pm
Location: Blackpool

Post Sat Jul 17, 2010 6:56 pm

head looks mint :cool: what have you painted it with? alpina splitter will also look cool (biased as i have one on mine :twisted: ) - nightmare on 60mm front drop though!
Image
Eddie25
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Fri Dec 29, 2006 11:00 pm
Location: Gloucestershire

Post Sat Jul 17, 2010 9:49 pm

Hi mate not sure what paint was used on the head as it was done at the engineers, I can ask the question though. I'm chuffed to bits and it's made me crave a bufty block painting session :D

It will have to make do with a good clean up for now though otherwise it won't be back on the road this year. :(
CHR1S1990
E30 Zone Camper
E30 Zone Camper
Posts: 1121
Joined: Fri Mar 14, 2008 11:00 pm
Location: Blackpool

Post Sat Jul 17, 2010 9:53 pm

i'd have it back on the road ASAP mate! :cool: yeah do ask as i'm at that stage myself. cheers

chris
Image
csl
E30 Zone Addict
E30 Zone Addict
Posts: 2116
Joined: Mon May 30, 2005 11:00 pm
Location: Lancaster

Post Sat Jul 17, 2010 11:50 pm

Looks like youve got a bit of work on Eddie!
Keep at it fella as im sure it will look and sound fantastic. :cool:
Im about to do the same to mine btw regards the top end.
Eddie25
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Fri Dec 29, 2006 11:00 pm
Location: Gloucestershire

Post Sun Jul 18, 2010 5:56 pm

csl wrote:Looks like youve got a bit of work on Eddie!
Keep at it fella as im sure it will look and sound fantastic. :cool:
Im about to do the same to mine btw regards the top end.
Thanks mate, it's been a long road but there is finally light at the end of the tunnel. :D

Are you using Bowkers in Preston for your parts? They mentioned a mint dolphin grey tech 2 that comes in, they also mentioned a customer was doing the same rebuild as me. :cool:

Really good bunch of lads down there, they can charge like a rhino but the service is 1st class and they are no stranger to the E30.
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Sun Jul 18, 2010 6:27 pm

This is the first time ive seen work on this car, some tasty morsels goning into this!

Any other Alpina trinkets going onto this go with the front spoiler?

Oh, and keep the pics coming! :cool:
bobbin1982
E30 Zone Squatter
E30 Zone Squatter
Posts: 1508
Joined: Mon Mar 23, 2009 11:00 pm
Location: Norwich,Norfolk

Post Sun Jul 18, 2010 7:31 pm

Shiney new looking engines give me a hardon :o:
Driving my digger!!!!
tonybtonyb
E30 Zone Addict
E30 Zone Addict
Posts: 3580
Joined: Wed Jun 13, 2007 11:00 pm
Location: essex

Post Sun Jul 18, 2010 11:20 pm

looking good :cool:
They don't make bm's like this anymore!..They should.
Image
Eddie25
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Fri Dec 29, 2006 11:00 pm
Location: Gloucestershire

Post Mon Jul 19, 2010 8:21 pm

Thanks for all the nice comments fellas really appreciated.

BSS i'm a bit undecided which way to go at the moment. I decided to go with as close as I could get to Alpina 2.5 sport package spec but it is hard work. After a lengthy chat with Ant at Atech (top man) I settled on the 264 cam as this was the most mild and hopefully user friendly one i could find. The last thing i want is to turn it into a Honda and Ant says the original Alpina cam was nowhere near 268 as stated on Wiki. It will however be going for a remap, again as close to Alpina spec as I can get. I hope this coupled with the increased compression will keep driveability as it should be.

I would love an original Alpina exhaust but I have heard the cost is pretty terrifying, I am also tempted by the rear spoiler but the wait is pretty long IIRC?
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Mon Jul 19, 2010 11:31 pm

Alpina exhausts are NLA and were £1200!

Boot spoilers now available as well after being on back order for ages.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
Scruffymurphy
E30 Zone Regular
E30 Zone Regular
Posts: 775
Joined: Sun Sep 24, 2006 11:00 pm
Location: Ireland

Post Mon Jul 19, 2010 11:53 pm

Excellent work. It's nice to see an E30 getting the attention it deserves.
csl
E30 Zone Addict
E30 Zone Addict
Posts: 2116
Joined: Mon May 30, 2005 11:00 pm
Location: Lancaster

Post Tue Jul 20, 2010 11:00 pm

Eddie25 wrote:
csl wrote:Looks like youve got a bit of work on Eddie!
Keep at it fella as im sure it will look and sound fantastic. :cool:
Im about to do the same to mine btw regards the top end.
Thanks mate, it's been a long road but there is finally light at the end of the tunnel. :D

Are you using Bowkers in Preston for your parts? They mentioned a mint dolphin grey tech 2 that comes in, they also mentioned a customer was doing the same rebuild as me. :cool:

Really good bunch of lads down there, they can charge like a rhino but the service is 1st class and they are no stranger to the E30.
Yes mate,i have used Bowkers since i first got the car. I do occasionally turn up in the Sport as well.
I have a thread in the pic gallery of some of the bits,sad i know :D but have a nose fella.

Bowker staff have always been great with me and the car.Good people.
Eddie25
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Fri Dec 29, 2006 11:00 pm
Location: Gloucestershire

Post Sat Jul 24, 2010 5:06 pm

Well I am still inching forward and praying I can get the turd fettled in time for Santa Pod.

The gearbox output seal had well and truly soiled itself:

Image

Uploaded with ImageShack.us

Rubbish photography as ever but hiding up there is a new seal, new prop doughnut and new retaining nuts bolts etc much better :D :

Image

Uploaded with ImageShack.us

Haven't finished undersealing and waxoiling the underneath yet but had to try on some of my new tin wear. It's all about the :bling:

Image

Uploaded with ImageShack.us

Six ultrasonically cleaned and refurbished injectors slotted into their new home. Lovely :cool:

Image

Uploaded with ImageShack.us
Eddie25
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Fri Dec 29, 2006 11:00 pm
Location: Gloucestershire

Post Wed Jul 28, 2010 6:56 pm

Ok so I pushed the boat out and went for a Fritz Bitz centre box and rear box and I have to say if it sounds half as good as it looks I will be a happy man. Superb quality and the service to match.. (I ordered it Monday lunchtime and it arrived Wednesday morning):

Fits the BTB like it grew there :cool:

Image

Uploaded with ImageShack.us

Centre box:

Image

Uploaded with ImageShack.us

Finish on the back box :bling:

Image

Uploaded with ImageShack.us

Some shiny potato cannons :D

Image

Uploaded with ImageShack.us

I cant wait to fit it and fire it up.
Eddie25
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Fri Dec 29, 2006 11:00 pm
Location: Gloucestershire

Post Mon Sep 06, 2010 12:43 am

Well sort of, the turd is back on the road but I dont think it will ever be finished :D

Image

Uploaded with ImageShack.us

Alpina round the front (whole car needs a good polish)

Image

Uploaded with ImageShack.us

Tech 1 round the back :cool:

Image

Uploaded with ImageShack.us

Minty mint IS interior, brand new gear gaitor and brand new Tech2 steering wheel (well worth the bank account abuse). Note needs a good clean, you can see the dust from the welding and what not in the vents.

Image

Uploaded with ImageShack.us

Need more pics of the new refurbished donk but with the fritz bits exhaust and CAT cam it sounds fantastic + it goes like a polished turd down a waterslide. :D
Blitz
Married to the E30 Zone
Married to the E30 Zone
Posts: 11151
Joined: Mon Jan 30, 2006 11:00 pm
Location: East London+Basildon

Post Mon Sep 06, 2010 1:32 am

Looks great. fritz bits exhaust is lush.
Eddie25
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Fri Dec 29, 2006 11:00 pm
Location: Gloucestershire

Post Mon Sep 06, 2010 1:51 am

Blitz wrote:Looks great. fritz bits exhaust is lush.
Can't recomend it enough mate.

The fit and finish is superb and the sound is exactly what I have been after for a long time; quiet and refined in the cruise but that classic 6 cylinder howel comes into play when your hair is on fire. winkeye
powelly
E30 Zone Squatter
E30 Zone Squatter
Posts: 1649
Joined: Wed Dec 06, 2006 11:00 pm
Location: On the scrap heap

Post Mon Sep 06, 2010 8:13 am

I'm liking this car a lot, very nice indeed.
Image Le Mans Classic 2006
octanejunkie
E30 Zone Regular
E30 Zone Regular
Posts: 479
Joined: Fri Jul 02, 2010 11:00 pm
Location: Somerset England

Post Mon Sep 06, 2010 9:36 am

I have made a mess in my trousers..... :mad:
csl
E30 Zone Addict
E30 Zone Addict
Posts: 2116
Joined: Mon May 30, 2005 11:00 pm
Location: Lancaster

Post Mon Sep 06, 2010 11:26 am

Nice job :D
Baz666
E30 Zone Addict
E30 Zone Addict
Posts: 3516
Joined: Fri Feb 29, 2008 11:00 pm
Location: Ipswich, Suffolk

Post Mon Sep 06, 2010 11:53 am

Very nice job fella, does the aplina spilter come a little short or have you cut it down, thinking of having one on my Baur. :cool:
Image
E46 328ci, sport bumpers, 19" style 95`s
Baz666
E30 Zone Addict
E30 Zone Addict
Posts: 3516
Joined: Fri Feb 29, 2008 11:00 pm
Location: Ipswich, Suffolk

Post Mon Sep 06, 2010 11:54 am

just looked at it again..... :mad: .....it`s not pushed right back is it. :roll:
Image
E46 328ci, sport bumpers, 19" style 95`s
Eddie25
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Fri Dec 29, 2006 11:00 pm
Location: Gloucestershire

Post Mon Sep 06, 2010 6:43 pm

Baz666 wrote:just looked at it again..... :mad: .....it`s not pushed right back is it. :roll:
Thanks for all the positive comments folks. I will give the snotter a proper clean and try to get some more pics up before the Pod.

Only issues I am having at the moment is noisey tappets. I have set them twice so far and they are noisey again. :cry: I am going to let it find it's way for a bit though as I am hoping it is just due to the new valve train running in.

Baz not too sure what you mean? The front spoiler is pushed all the way back and the car is likely 20 kg heavier as I completely soaked the front valance in wax oil before fitting it winkeye

The corners stick out a tad in front of the wheels but I had this down to the standard facelift bumper not being quite as wide as a tech 2?

Overall though I am really happy with it. Just wish I wasn't so far from Ant as it could do with a tune up and his mapping magic to make the most of the engine trinkets.